2007-2021 Tundra Rough Country 3.50-Inch Bolt-On Suspension Lift Kit Review & Install

[@ExtremeTerrainToyota]

Shop this Rough Country Bolt-On Lift Kit! : terrain.jp/3kbqcI2

[@5312cesar]

Hi there I’d like this 3.5” suspension kit with lift struts for my truck. I have a 2015 Tundra SR5 2WD. Will fit? Please let me know to order it asap. Thank you! Cesar

[@stevekeenan9673]

4:57-5:25 knuckle out 8:28- 8:41 24mm camber bolt loosened 9:08-9:20 shock out 11:55-15:12 diff drop 16:14- 18:17 A arm out 22:12- 23:05 grease a arm 23:06- 25:15 install a arm 25:16- 27:04 rough country strut in 27:14 end links in

[@JoshJorg44]

That truck looks like it's never been driven. All the bolts and nuts look perfect and there's no grease or rust anywhere in the wheel wells. It looks absolutely pristine as if it was all changed out and cleaned before this job was done and then redone again

[@ExtremeTerrainToyota]

The beauty of our fleet vehicles is that they spend a LOT of time in our parking lot and only get driven in and out of our video and photo studios. They're all low mileage. 😅 Thanks for watching! -Zach

[@jim321bob321]

Help! Looking for the E-brake relocation bracket shown here at 43:38. Any help please?

[@thaioun1]

Are you able to retain the rear trd sway bar or does that come off with the lift kit installed?

[@zheng1987]

Tie rod end didn’t have to be removed? And brake line and abs line need to remove to the side too?

[@alejandromancilla7845]

I put some 35s on my 2018 Put an aftermarket front bumper but still have to trim some on the back side of the front tires, maybe not if I lift it a little bit

[@yangxai3317]

Why you guys don't install carrier bearing drop? Just wondering

[@Som3thingClever]

Wow I can't believe you went through all this work just to make this video and not waited to do it permanently on a customers truck.

[@frank_texas7400]

He probably got paid by rc

[@CallMeP1ink]

Just a question, I have a 2010 2wd DC Tundra and I want to purchase this lift with the front struts, again I have a 2wd tundra and RC states the front shocks do not fit 2wd models. From what i see here everything looks to be identical to 2wd models. My question is, If I purchase this kit (RC 3.5 w/ Front Lifted Struts) will it fit? From what I know already everything in the rear is identical no problems there, but I don't want to purchase this kit with only new rear shocks. The Tundra I own Has 140K Miles and is due for a nice upgrade. Thanks in advance.

[@The305guy]

Why does it not work with 2wd tundra?

[@bigpoppapump4060]

Great video u r a very good teacher n mechanic 👍

[@ExtremeTerrainToyota]

Thanks for watching! -Zach

[@timmononen8492]

You forgot to undo the ABS wire from the UCA. They are prone to breaking when you stretch em like that.

[@cjohnson18711ify]

Max tire size is 33in??? Ive seen tundras with 2in spacers running 35s.

[@El_Basically_210]

Will this work on just a 2WD model as well?

[@helloman4251]

Great video. Can't wait to do my tundra!

[@ExtremeTerrainToyota]

Thanks for watching! -Zach

[@jeremeywright]

Do u need the diff drop on a 3 inch leveling kit?

[@TheCivic20001]

Great video nice clean job 👍

[@ExtremeTerrainToyota]

Thanks for watching! -Zach

[@josefernandez-ln3ip]

Bouth the 3.5 n3 struts. My truck now leans Are they side specific. Like oem or fox struts

[@precisiondetails3003]

How bad is it? The tundras are know for leaning towards the drivers side on factory suspension. Not sure if rough country did anything to compensate.

[@TT-nv7vj]

Can you fit 35s with a bodyount chop?

[@wesleycrouch2135]

I think with stock wheels you can fit 35s by just taking mudflaps off. I have 33s on a stock tundra and it comes nowhere close to rubbing.

[@TT-nv7vj]

@@wesleycrouch2135 Sweet! Preciate the intel!

[@viteshchand5373]

I’ve got a 2015 tundra platinum. I don’t go off-roading. Will this setup be perfect for normal driving. Will the truck needing to get re-geared? Also if it does what are going to be good options? Thank you very much.

[@viteshchand5373]

Will this setup work with 305/55/20 wheels and tires?

[@ExtremeTerrainToyota]

This will have good drivability for a daily. Re-gearing isn't necessary for this, but if you find that your truck is a bit more sluggish with a larger tire you can re-gear if you choose to do so. This will also work just fine with 305/55R20's considering they're equivalent to a 33x12" tire.

[@viteshchand5373]

@@ExtremeTerrainToyota thank you

[@georgioantoine4194]

@@ExtremeTerrainToyota what regearing would you recommend? love you’re content. subbed.

[@samurai000705]

Looking to lift my tundra I'm guessing it's gonna need a front end alignment afterwards?

[@ExtremeTerrainToyota]

Yep! A front end alignment after your lift is key! -Zach

[@BADD1ONE]

Can the struts be removed without removing the control arms?

[@balam8743]

Yes, just drop the lower control arm and you are good to go.

[@KurNorock]

"Premium lift" "Space blocks" Those two things are mutually exclusive. This is an entry level kit for mall crawlers who never go offroad.

[@cjohnson18711ify]

Perfect for me .I just like the look of a lifted truck.

[@dka7873]

90% of lifted trucks never go off roading. Possibly more.

[@RP-vr8pi]

Off roading is boring for me. I can't stand driving 2-3 mph.

[@KurNorock]

@@RP-vr8pi If off-roading is boring for you, then you've never actually been off-roading. Just driving slow on dirt roads and unimproved trails isn't off-roading.

[@RP-vr8pi]

@KurNorock bro I took my tacoma out for off roading few times, but it's not for me

[@zillpickle8910]

Channeled steel is the word you are looking for.

[@bradenclark4328]

Great Video........thanks!

[@ExtremeTerrainToyota]

Thanks for watching! -Zach

[@mnnascarfan]

what no safety glasses?

[@NebuChadNezzarKBDN]

Why no dust covers for the shocks?

[@Y0B0YCHRIS]

Dust covers literally do nothing positive, they hold dust, salt, and water. All promoting rust

[@Keepingupwiththeos]

My toxic trait is that I think I can do it after watching this video

[@ExtremeTerrainToyota]

We make it look easy, don't we??? -Zach

[@frank_texas7400]

Worst part if that I probably have better tools than an average mechanic and I always bail

[@richardtroumbly7023]

Why doesn’t he say anything about the passenger side do I need to drop everything before I go under and do drop bolts Jesus, 50k truck and can get new diff bolts to go in not even

[@SCStang]

Terrible job selling the control arm 😂

[@unknownindividual731]

What you referred to as a set of "Regular Pliers,) are technically called "Channel Lock Pliers."

[@zillpickle8910]

Channelock is a brand names. The pliers are water pump or tounge and groove. Those particular ones though are knipex cobras