This specific Focus ST developed a leak and of course found out it was one of the heater hose. Part number CV6Z-18472-AS. After hose install please don’t forget to add coolant dex-cool.
Пікірлер: 15
@alvi53314 жыл бұрын
Thanks! I’m having the same issue with my focus ST. Are the hose pliers you used half inch and 3/4 inch?
@car-lo4 жыл бұрын
al vi i used 11” long with 2.5” opening straight and a bent 90 degrees long nose... and regular pliers nothing special tools.
@alvi53314 жыл бұрын
Car-Lo good to know, thanks a lot.
@Jorge-1253 жыл бұрын
Thanks for posting this video and the part number. My ST recently started leaking and I bought both hoses to replace because I might as well replace the other one while I'm at it. How much coolant came out of the hose when you pulled it off? So I know what to expect when I replace mine.
@car-lo3 жыл бұрын
Very little came out make sure ur car is cold. Just top off when car is warm :) thanks!
@Jorge-1253 жыл бұрын
@@car-lo I actually just got done swapping out both hoses. It wasn't too bad, but one of the grey clamps on the hoses didn't want to come off. So it took me about an hour. Glad it's done and over with😂
@car-lo3 жыл бұрын
@@Jorge-125 nice, make sure run the car and u have no leaks 🤙🏼
@Jorge-1253 жыл бұрын
@@car-lo I'm already on it, thanks!
@richiedinks13782 жыл бұрын
mind sending the part # for both hoses bro? i drive a 15’ model what model do you have?
@lanskielanz37694 жыл бұрын
yo! we got the same problem. but is this hose come from the left or right? cuz mine was the left hose if u facing infront of the car.and can I have the diameter of the O ring that u pulled from the hose?i was about to put it in the shop and they will charged me $300+? and how many hrs u work on it? i really dont know about cars but if it just a basic repair i could do those stuffs lol.
@car-lo4 жыл бұрын
Lanskie Lanz facing it, it is the left one. The o-ring Is a special size. The dealer sells the whole piece, it is for peace of mind to replace the whole thing. I haven’t located anyone selling just the o-ring. Don’t forget to buy a coolant 50/50 for refill.
@lanskielanz37694 жыл бұрын
@@car-lo the hell!ford really greedy AF!i could see ur hose are still good,just that Oring got fckd up.u got ur parts in the ford dealer right?how much was it again? and can u tell me how many bolts u removed so i have an idea. and i assume u drain the coolant first b4 removing that hose? thank u man!
@lanskielanz37694 жыл бұрын
@@car-lo its weird.mine doesnt have an oring?
@miyu7i2 жыл бұрын
Hi.. do you know what inner diameter this hose is?
@car-lo2 жыл бұрын
Hi Mokshana, sorry I wasn't able to get the ID of the house.