removal and replacement of thermostat the temp gauge was not coming to normal temp this was the fix. tools: @MilwaukeeTool cordless ratchet screw drivers 15mm socket deep 10mm socket 10mm wrench duralast ratchet job time: 1hour
Пікірлер: 37
@stevenbenavidez256417 күн бұрын
Thanks for uploading a video and taking extra time to help others understand the steps.
@samedayautodetroit17 күн бұрын
U welcome
@joenunez54507 ай бұрын
Thanks for your time in uploading this video. I have a Chevy Cruze that has a similar housing.
@samedayautodetroit7 ай бұрын
U welcome
@_MaDD Жыл бұрын
Appreciate the video
@samedayautodetroit Жыл бұрын
U welcome
@moneychrismoneychris14502 ай бұрын
For compressing the thermostat spring to get in the slots on the housing you can use a socket and extension to compress it then turn the ears in the slots with pliers or flathead.
@samedayautodetroit2 ай бұрын
That work as well more then 1 way to skin a cat. Thank u for the feedback
@rugerrokey8 ай бұрын
@samedayautodetroit So when putting the thermostat insto the housing there ahould have been a tube (its called an insert tool).that you use to push down on the spring and then turn to get the thermostat tabs under the housing tabs 13:48
@samedayautodetroit8 ай бұрын
I used 2 screwdrivers and pliers to set it
@amitdamari15624 ай бұрын
Thanks
@samedayautodetroit4 ай бұрын
You welcome
@rocket5557 Жыл бұрын
Thanks for making the video. It was good camera work knowing how tight everything is down there. I'm just going to bite the bullet as it looks like more than I'm willing to put in time wise. Thanks brother
@samedayautodetroit Жыл бұрын
You welcome its tight for sure.
@OGTyeBGK5 ай бұрын
How did you get that bottom bolt out? Its too long theres no room for it to come out
@samedayautodetroit5 ай бұрын
Which ones
@angelbautista533 Жыл бұрын
Should I replace the housing at the same time?
@samedayautodetroit Жыл бұрын
yes why u got it apart.
@kalebcantrell74689 ай бұрын
W video! what gave you the idea to replace it. we got the same car engine temp seems to go up and seeing smoke intermittently. this seems simple as a first step to try and replace
@samedayautodetroit9 ай бұрын
Her temp was going up and down
@kalebcantrell74689 ай бұрын
@@samedayautodetroit thanks! once you got a new one installed do you need to add coolant and bleed the system?
@samedayautodetroit9 ай бұрын
@@kalebcantrell7468 add coolant for sure. It was good
@donwojcik2935 Жыл бұрын
That's some funny shit
@bsbroderick36 ай бұрын
Good video but it's a lil too dark
@cheriserenee1821 Жыл бұрын
😩😩 I need you
@samedayautodetroit Жыл бұрын
U need car help?
@cheriserenee1821 Жыл бұрын
Yes but I’m no where near Detroit 😩.
@tommymills5769 ай бұрын
My nigga💯💪🏾
@samedayautodetroit9 ай бұрын
Pericate you fam i do it for the ppl.
@tommymills5769 ай бұрын
@@samedayautodetroit definitely came through clutch
@samedayautodetroit9 ай бұрын
@@tommymills576 i do all kinda work so keep a eye out. That job was some bs i remember it. With that video its very hard job.
@ginomalley48236 ай бұрын
Where is the part when you take it out you skipped that
@samedayautodetroit5 ай бұрын
Which part
@TooDamnTired8 ай бұрын
My shop wants $306 bucks. Had to come here to see what I was paying for 😅
@TooDamnTired7 ай бұрын
Yeah he’s not asking for much for all that finagling. I’m sure it’s a little easier when you can use both hands, but that’s a lot of work. Plus the time it takes to drain it before… thanks for the video man! I learned a lot! ❤
@samedayautodetroit7 ай бұрын
yes it is alot of work for sure. they earning there money for sure.