2013 Explorer Sun Roof Not Working

[@darreldavis1]

Same problem with my 2013. Passenger side floor board soaked with water after a heavy rain. Curious to know what the Ford dealership would charge for parts and labor.

[@MadAustinite]

Good question! Probably a heinous amount of money!

[@raytorres9610]

Thanks very helpful! Same problem that I have.

[@howiefeltersnatch6974]

Thank you for this video. I think i have the same problem Shade opens but roof does not open. I found the motor at OEM parts 107.88. I wonder if your weep holes were blocked thus letting water in the cab???????

[@MadAustinite]

Yes, thats what the cause was. The lines were clogged towards the bottom of the tubes that drain down by the wheel wells

[@wd4624]

Do you have the part number for the motor? Thanks

[@MadAustinite]

@@wd4624 Here you go: BB5Z-15790-A

[@howiefeltersnatch6974]

@@wd4624 BB52-15790-A OEM parts 107.68

[@howiefeltersnatch6974]

@@wd4624 OEM parts has BB52-15790-A

[@wd4624]

Thanks for the video. Do you have a clip how you removed/installed the motor? Thanks.

[@MadAustinite]

I don't, but I think I saw one here on youtube that went into it. Sorry, I should've done it in the video. I literally thought "Oh I should make a video" after I fixed it...

[@shaunmaridelacena7026]

Hi. After replacing the motor did the sun shade closed all the way to the front? Thus the sun shade on the front uses the same motor you replaced on the driver side?

[@trekie30122]

My understanding is the passenger motor runs the shade, driver side is the glass. My glass failed to move, shade still closed fully.

[@flycmd8644]

Great video thx for the help!!

[@MadAustinite]

No problemo! Super stoked that this impromptu video helped you out!

[@ncmd89]

That’s how mine is 🥺 the back one works but not the front and it also leaks it’s such a struggle 😫😒

[@MadAustinite]

Look up some videos on how to clear the sun roof drain tubes. Its not all that difficult to do. Good luck!

[@artvandelay837]

do you have to calibrate the new motor?

[@MadAustinite]

Nope, it’s just plug and play.

[@artvandelay837]

@@MadAustinite thank you! do you know if you can just replace the control board? Like not the entire motor

[@MadAustinite]

@@artvandelay837 I don't think they sell the control boards separately. Plus, It would probable be a pain in the ass to try to open up one of the motors.