2013 Honda F6B speedometer stopped working. DIY remove and replace the speed sensor.

DIY. This video shows you how to remove and replace the speed sensor on your 2013 and newer Honda F6B / Goldwing motorcycle. How do you know it's the speed sensor and not something else? The check engine flashing code is 1 long and 1 short = 11. This tells you your speed sensor is bad.
* Caution, be sure to add the o-ring to the sensor before installing.

[@nathenrex1256]

I just bought a used GL1800 3 days ago, today I noticed the speedometer worked for a few minutes, then stopped and the FI light came on, noticed the one king blink and one short blink. Turned the bike off, restarted it, the speedometer worked for about 5 minutes, then stopped, light came on again. All this to say, thanks for the video, Sure made a tough job look easy. And good job camera lady. ;)

[@robertdoiron1379]

Awesome glad the video helped. I’ll let the camera lady (my daughter) know you said she did a good job! Enjoy your weekend.

[@Solar55]

You got the whole job done in the time I'd still be removing the top shelter and front lower fairing ! Handy tip to just pry the plastic out of the way. Thanks for the video.

[@robertdoiron1379]

thanks for the compliment !!!

[@Solar55]

@@robertdoiron1379 Turns out I had to remove the top shelter on my 04 GL1800 - there's a vent duct that has to be moved to get to the plug. The F6B doesn't have that vent.

[@jimwalton7665]

Speed sensor went out tonight, thanks, this helps tremendously.

[@robertdoiron1379]

awesome glad to help

[@michaeloneil6750]

Good job!

[@robertdoiron1379]

Thanks Michael. Glad the video was helpful.

[@user-di7xr8nt3l]

I followed the video & my leaked oil also. Do you have the part number for the O-ring? And how do you install it? I rewatch the video and it made no mention of an O-ring. Thank you for providing how to install the speedometer sensor.

[@robertdoiron1379]

Sorry about that. The o-ring can be ordered from partzilla here is the link www.partzilla.com/

[@user-di7xr8nt3l]

Thanks for the response

[@deandreknoxson5414]

Did you have to put an O-ring in ?I’ve tighten the hell out of it and I have a small leak coming out.

[@robertdoiron1379]

yes be sure to install the o-ring on the sensor before installing sensor.

[@justinegaspari1484]

2012 honda goldwing gl1800, start it up run down the road about 2 miles (speedometer is normal) and then the speedometer goes to 0, then jumps to 120, engine light comes on, do you think its the speedometer sensor?

[@robertdoiron1379]

Hi Justin, I believe it is the speed sensor. Its about ready to go out when it starts doing what your bike is doing. Please let me know if that's what it turns out to be. Thank you for the question.