2013 Hyundai Sonata front wheel bearing replacement scraping grinding noise passenger side

#ad
passenger side cv axle:
amzn.to/3gWHmtZ
wheel bearing and hub:
amzn.to/3Ui6cD0
slide grease:
amzn.to/3823Z8V
wheel bearing install tool kit:
amzn.to/3SWRL6t

[@sixpackcuda]

Very well done. Great video quality, camera angles, and explanation. Thank you. I would recommend adding the word "bearing" to your video title to make it easier to find. When I did a simple search for "sonata bearing" your video didn't come up in the results, and it's probably the best one I've seen for this repair.

[@s33therfan]

Thanks for the terrific feedback , it is truly appreciated.

[@citrinwarren6073]

Well planned demonstration. I will do a second viewing prior to foxing my Hundai. Thanks.

[@s33therfan]

Thank you

[@RJ67.]

Wouldn't it have been easier just to buy the whole new set up

[@lothianmcadam1]

(9:09) I'm curious why you removed the CV axel--not necessary for this job. I presume you were out of straps to hold it out of the way?

[@daltonskygazerobservatory5772]

Air hammer is way to go. Just did two myself on my Sonata this past year took about 25 mins per side combo air impact and air hammer with rounded nose….bearing came out with help from air hammer. Now sounds like I have rear bearing will be doing soon.

[@s33therfan]

Great tip , thank you.

[@tritran8582]

Clear instructions thank you for the video!

[@s33therfan]

Thanks for watching.

[@chrisburgess4822]

well described and should be a big help...much appreciated

[@s33therfan]

Thank you for the great feedback, it is much appreciated.

[@emanbuoy7673]

Please what is the name of the part you used to remove and reinstall the bearing??

[@s33therfan]

Bearing press kit: amzn.to/3jk05h0 Hub puller slide hammer( Optional ) amzn.to/3NT33Hx Pretty much pays for itself the first time. Thanks for watching.

[@emanbuoy7673]

@@s33therfan ty

[@ЕгорБобров-ь5м]

6:00 haha typical =)))

[@najar53ify]

When did you hear the noise? My Sonata is making a grinding noise which is coming from the front, and I can feel it in the pedal when it starts grinding, but it’s only when I brake a lower speeds, I replaced the pads and rotors in the front cause my initial thought was that is must be the brakes since it’s grinding. However that didn’t fix it. So I’m just wondering if you had the same problem or if your sonata was just making noise while driving in general? I also checked the sliders to and they all seem to be fine, so i know it’s not the brakes, at least the pads, rotors, and calipers. Great video by the way!

[@s33therfan]

I am just going to throw this out there because I had a similar issue. I swore the grinding noise was coming from the front and replaced both front rotors and the brake pads. Noise was worse. Turned out to be the rear rotor and it was really bad. Other than that I am not sure what it could be if it only happens when applying the brakes. Hope this helps.

[@najar53ify]

@@s33therfan I haven’t checked the rear brakes yet but I’ll definitely try that! Thanks for the reply!

[@LOCOLAPTOP]

Man. I feel like an idiot for not thinking about the slide hammer to pull it out. Almost got new knuckle assemblies for the SIL. I was trying to figure out how to get it off on the bench press and gave up.

[@s33therfan]

Thank you for watching.

[@majhoolmaroof2065]

DIYers.. this is how videos should be made.. Clear. HD. Great Lighting, and great voice-over.. Lately we are concerned with the length of videos we skim on details.. Thank You sir for an amazing video! Please make more..!!

[@s33therfan]

Thank you very much.

[@MsJhook]

Hit that knuckle with the air hammer

[@HouseDoctorRay]

Thanks for this. I'll be jacking mine up today to see if the bearing is bad. After watching this I sure hope it's just a bad rotor. Please add your amazon tool links to your video description.

[@s33therfan]

Thank you very much for the great feedback and thanks for watching. Let me know if there is an issue with the links.

[@omarmorales996]

Hello my friend what is the spindle ?

[@emanbuoy7673]

I have another question pls, some say not to lubricate the knuckle before putting the bearing back in.. But i see you lubricate your knuckle and hub... So I'm guessing you have to?

[@s33therfan]

Great question. You really do need to grease or lubricate the bearing/hub or knuckle. Not only are these bearings/hubs are difficult to install but removing a rusted seized bearing is even more fun. The bearing/hub is a press fit , even if greased it will not move or spin. Even freezing the hub and applying grease it is a tight press in. Thank you for your feedback

[@emanbuoy7673]

@@s33therfan thank you so much.. I'm bouta do this myself tomorrow

[@marcseverinnkayapassongo3173]

This is an amazing video , so this noise is due to the front wheel bearing part ?

[@s33therfan]

Yes. It was probably one of the loudest. Also it came out of no where , no warning. Thank you for watching.

[@dayslife]

that was one good workout.

[@s33therfan]

Definitely, and I believe the heat index was around 100 about this time. Appreciate the feedback , as always thanks for watching.