Рет қаралды 43,454
My Jeep Grand Cherokee's check engine light came on and it turns out I need to replace the thermostat. It's a $20 part, but while I was doing that I thought I'd do a coolant flush as well. It's a simple and cheap job that you can knock out in 20-40 minutes. Hopefully my DIY video can give you the confidence needed to complete this project. Feel free to leave questions down below and like and subscribe to my video to see my follow up project where I replace the thermostat.
Below is the full parts list for everything that you're going to need to do this job.
Tools needed:
Bucket or drain pan -
Funnel - amzn.to/3lBHvSx
Clear Plastic Tube
8mm Hex Socket - amzn.to/3kfAEOR
3/8" Ratchet Drive - amzn.to/3nKskJd
Parts required:
7 Quarts of Zerex Coolant - amzn.to/3kh2DOp
at least 7 quarts of Distilled Water - get at local supermarket
Optional but recommended:
Lint-free paper towels
Safety glasses (required)
Gloves (optional)
Cardboard (great for catching spills)
Feel free to comment below, thumbs up this video, and subscribe to my channel so that I know to make more just like this in the future.
Thanks for watching!