2014-2019 Ford Fiesta ST Performance Air Intake Installation Guide by Mishimoto

2014-2015 Ford Fiesta ST Performance Air Intake
www.mishimoto.c...
2016-2019 Ford Fiesta ST Performance Air Intake
www.mishimoto....
Engineering: engineering.mis...
Facebook- mishimoto.com/f...
Twitter- www.mishimoto.c...
Instagram- mishimoto.com/i...
Model: MMAI-FIST-14
• Direct fit for 2014-2019 Ford Fiesta ST
• Dyno-proven maximum gains of up to 6 whp and 10 wtq on the stock tune
• Highly aggressive intake tone under acceleration
• Designed to work with stock tune with no additional tuning required
• Air filter placed to receive maximum airflow from the front of the vehicle
• High-flow filter operates at up to 2,000 CFM
• Black powder-coated airbox keeps unwanted hot air from entering the air filter
• Available with a polished, wrinkle black, or wrinkle red pipe
• Mishimoto Lifetime Warranty
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.

[@KrausesCars]

You’re guy’s products have come so far, from just clamps and accessories. I’m so glad to have been here love your products and will continue buying for all my future builds!

[@niks.6250]

You guys have the best install videos for auto parts I have ever seen. From the tool overview, to the step by step instruction. Kudos

[@mishimotorob5769]

Thanks Nik, we really appreciate it!

[@Hinjima92]

Wow what a fantastic video demonstration, best ever! Never heard of Mishimoto before ( we dont have you in Norway I think ) But I will definitely check you first whenever I need something upgraded!

[@303m1ke]

Thank you! This video is simply perfect.

[@davidedonelli2196]

Wow. The best install video on You Tube. Greetings guys.

[@freeyourmind8849]

quality brand. and very well made video with details

[@Surentiy]

Will this intake be made available in the UK ?

[@Mancillaj84]

is this intake legal to use in california?

[@LaneHouse]

On their website it has the CARB certification "CARB Compliant EO#: D-759-1"

[@FsMegaMan]

Lane House So is that a yes?

[@vtbbs2k]

What size are the bolts for the maf I bought a used intake and do not know what size and thread they are?

[@mishimoto]

Shoot us an email at [e-mail] and the team will be happy to look into this for you.

[@theighthokage2943]

2.5mm Allen bolts

[@vtbbs2k]

@@theighthokage2943 2.5mm Allen just tells you what size Allen key to use I needed the thread pitch. the bolt used is a M4 x 0.7.

[@theighthokage2943]

@@vtbbs2k what year was your st? Bc the new ones come with like a dual port thing and every video I’ve seen only shows the single port

[@vtbbs2k]

@@theighthokage2943 are you talking about the evap hose? The 2014-2015 just have one, 2016+ have two evap hoses so you need to buy the right one for your year.

[@connorhutchison]

Will this fit a 2019 ST-Line?

[@mishimoto]

Hello, This does not fit the ST-line models. Sorry!

[@kylecosta1127]

St- line is just a regular Fiesta with nice trim. You have a completely different engine.

[@ericswansonjr.8985]

Is this the same procedure for the 2016 as well? Can't seem to find one for it and this says only 14-15

[@mishimoto]

Hey Eric! Basically the same, with a few minor differences. So, if you go the video at 1:28 - Rob disconnects one Evap line from the intake pipe. On your car, there will be two of these connectors - you will disconnect both of them in the same way. If you go to 4:53, Rob reconnects the same hose to the Mishi pipe - it would be at this point that you would follow the above step to install the adapter - it basically takes two evap hoses and makes them one. Let us know if this makes sense, or you need any additional instructions/have any questions! :)

[@JustinPreher]

Mishimoto Automotive You guys should just make a video on the '16 install.... lol. Or maybe a shortened video explaining the differences between the updated install on the newer models?

[@larsdevries8941]

does it not fit on a 2013?

[@mishimoto]

We do not show that this is compatible with the 2013 models.

[@RockLeeOfTheMounties]

Do you mean '14? There shouldn't be a '13 model.

[@JustinPreher]

Anyone have any advice on getting that worm gear clamp loosened up on the intake air tubing down by the turbocharger on a '16? It's wayyy down there and the bolt is facing the front of the car. It may look easier for other people compared to me, I have super meaty hands so these things become a challenge. Lmao. Any tips?