2014 Chevrolet 1.8 litre cam phasers replacement

[@bobdelabourer1307]

Very excellent video, thank you. I am also going to change out the original cam phasors at 236,000 miles. I had rebuilt the cylinder head at 200,000 miles since head gasket blew, I should have changed the phasors at the same time too 😢

[@genuismensa]

First off... the beat didn't have to go so hard I had to turn my sub down bahahaha. Thanks for the video.

[@ralphrussell2883]

Have watched a lot of other videos on camshaft sprockets, belt, etc. This shows some things that others don't such as cam lobe positioning at TDC. I noticed that you totally skipped over torqueing the harmonic balancer bolt. One procedure that is hard to find is where to install the crankshaft locking tool to aid torqueing the harmonic balance bolt. (I may have to create a video myself now that I figured it out.) One last thing is that it appears that you reused the camshaft sprocket, timing belt tensioner and harmonic balancer bolts. These are all stretch to torque bolts and CANNOT be used a second time.

[@RoubidouxCreekOutdoors]

Where can I get the camshaft Cap bolts ?

[@ronaldmahoney1283]

Videos are supposed to be informative! Where's the audio? Get rid of the music, this isn't Spotify or pandora!

[@juansaydeflores890]

Than you!!

[@michaeljamen8603]

I couldn’t watch it due to the Music

[@arcadegeek]

Good info but this camera angle and music - oof.

[@badlucklazyguy]

Unwatchable with the music and the orientation of the camera. At the very least remove this God for saken music and flip the video angle.

[@moefuggerr2970]

Vertical vid gets a thumb down and a block.

[@Lawrence-Joseph-Norse]

Repent to Jesus Christ! Luke 5:32 King James Version 32 I came not to call the righteous, but sinners to repentance. Luke 13:3 King James Version 3 I tell you, Nay: but, except ye repent, ye shall all likewise perish.