2014 Ford Escape Titanium 2.0L Ecoboost oil change tutorial. If this video helped you, please like and comment so we can grow the channel. Thanks.
Пікірлер: 33
@BD-nl5je2 жыл бұрын
You need to add the last part which is to reset the oil change reminder of the computer. Great video but I had to go find that somewhere else. EDIT: There are two 7mm hex screws on the outermost sides of the under cover, not phillips screws. To reset the oil change indicator pust the engine start button without your foot on the brake. Then foot on brake and throttle down all the way and 30sec later it is reset.
@joshmurphy19623 жыл бұрын
CLEANEST ENGINE BAY I'VE EVER SEEN FOR A 6 YR OLD CAR
@reviewspot29983 жыл бұрын
Thank you. I detail it weekly.
@wesleymoody1754 Жыл бұрын
Thanks. Just about to buy a 14 escape and this made my decision easy. Appreciate the video.
@CharlieLowry2 жыл бұрын
Awesome video, just what I needed
@jzjzjjz8962 жыл бұрын
crystal clear. Thanks for the video.
@therealkyto2 жыл бұрын
I appreciate you for this 😎
@kevinbates79063 жыл бұрын
Great video.
@reviewspot29983 жыл бұрын
Thank you.
@CharlieLowry2 жыл бұрын
I'd like to see you detail it
@Josh-of-all-Trades2 жыл бұрын
Great, but... now how do I reset the oil change light?
@s.p.92622 жыл бұрын
Excellent video, I recently purchased a 2014 Ford Escape Titanium with the 2.0 liter engine. I'll need to pickup a set of ramps and it will be oil change time for me as well. I have a late model Ford F,-250 and use the Mobil-1 full synthetic oil in it also. That's a very good lubricant. I'll be using it in my Escape as well. Thanks
@ItsBaphometАй бұрын
What headlights do you have
@mattnelson11432 жыл бұрын
'Or any of the fukken Turbo lines' lol
@cahrvillamor43052 жыл бұрын
hello sir, nice video.. what kind of oil is it? 5 W 20, fully synthetic? thanks
@reviewspot2998 Жыл бұрын
Hello. I show the oil in the video.
@ericmarchant30603 жыл бұрын
Is this a good thing to start with as someone who wants to work on cars but doesn't know how?
@kathleenscrivens40513 жыл бұрын
+
@reviewspot29983 жыл бұрын
This is an excellent beginner project.
@MrDREWsantana2 жыл бұрын
How do u keep the engine bay so clean!
@reviewspot2998 Жыл бұрын
I usually clean my vehicles weekly.
@evangels23 жыл бұрын
anyone know how to replace the plastic nuts that hold the splash shield
@reviewspot29983 жыл бұрын
You should be able to buy new ones at your local auto parts store.
@evangels23 жыл бұрын
@@reviewspot2998 thanks for the response but I need to change out the plastic nuts not where can I get them
@tcalcut5 ай бұрын
A work light would have been decent
@jamieolson203 жыл бұрын
I would use Purolator or motor craft filter, fram is not good
@reviewspot29983 жыл бұрын
I normally use Motorcraft but I would have to order it where I am at.
@jeffklaubo31683 жыл бұрын
I've used fram for 15 years and have had 0 issues with them or my vehicles
@blizzy6392 Жыл бұрын
@@jeffklaubo3168 Same here. I've been using Fram since 1978 with zero oiling problems. The newer synthetic filters are even better.
@omegatron18433 жыл бұрын
Wrong oil..5_20w is what it calls for..30w is thicker.. It matters..tiny holes where oilflows in engine..:p
@omegatron18433 жыл бұрын
Correction.. The internet say 5_20w..but when i went tochange mine i seen 5_30w on the cap..you right
@reviewspot29983 жыл бұрын
I know 😀
@blizzy6392 Жыл бұрын
Ford needs a swift kick in their rears for their poor design in their placement of the oil and coolant filler caps on the Escape! Shameful!