2014 Mercedes E350 (M276) Engine Air Filter Change

[@paulsiwko-bajon8585]

Finally, the best video for M276 air filter replacement. Million thanks !

[@smartin684]

Thanks! Love your video because it gets right to the point with no BS or music or any extra junk. No talking about how many cars you have, what your mom made for dinner or how your dad taught your how to fish or some other claptrap. Excellent

[@zhaoyangxie]

Thanks! This is the only video with the M276 engine, all the E350 W212 videos are the previous gen engines.

[@Maximus_187]

Great video man, nearly same steps on Mercedes E350 2012 . Just cleaned my filter by my self . Thank you

[@bcampbell2211]

There's no need to disconnect the sensor if you're just doing the air filter. You can lay the airbox across the top cover to do the change. Of course I say this AFTER I broke the clip to that sensor so.... Great video!!

[@billyblurton4803]

That grey clip is just a lock . I watched this and first thing I did was drop it into the abyss

[@thex2thaz]

Don’t feel too bad. There’s still a pair of pliers somewhere in the abyss at the bottom of mine.

[@garretttaravella8349]

Great Video! I watched it several times before replacing my filter myself!

[@philbiker3]

Thank you for sharing this! So easy to do. Thanks to this I knew that I needed to get the proper hose clamp tool. Easy peasy thanks for sharing!

[@ACohen]

Thank you -- I ordered all those parts from Amazon. Great video and service to the community!

[@henryk8061]

Same engine as I have. Each one is different, and I really appreciate your video. It was a great help.

[@jamespowers2848]

Thanks a million. Tough video to find - glad I did.

[@IqbalContractor]

Thanks for sharing. Make my life easier. Did it by myself.

[@kwangnam9993]

I used 8mm in place of E10 socket and used a flathead screwdriver since I didnt have a trim removal tool. I bought the clic hose plier from Amazon for $12.99. Thanks for the video since my search for ML350 lead me to two filter configuation from the top which was not correct. E350 air filter location is exactly same as mine.

[@pjfitter3267]

Straight to the point video !! Thanks

[@kwangnam9993]

Thank you. This is same for 2014 ML350 AMG Edition

[@parteibonza]

Liked! Also ❤️’d the dusting off hands at the end 😂😂😂👌🏼

[@jtran3546]

VERY NICE, VERY THOROUGH, VERY PROFESSIONAL

[@ThatS550guy]

Easy to take off now I know I can add and aftermarket K&N intake in that spot thanks I’ll do it tmrw maybe

[@fb1861]

Great video. Sidenote: The bolts to the engine need 9Nm tourque.

[@alizadeh9838]

Great video! Would you please do a video on replacing the cabin air filter of 2014 MB E350?

[@glasser2819]

also lube the blower fan... the shaft is assembled dry so it gets bad early. Put oil on both side of sleeve bearings.

[@aceking894]

@@glasser2819 can you give us more detail on oil the blower fan? Thanks

[@astrippa]

Great video. Thanks for uploading. For the clamp hose pliers: What size is required. The one I have can be used on clamps up to 44mm. Would that work? Thank you :)

[@glasser2819]

this cheap clamp are a royal PITA 👍🏻

[@vg247]

What is that “white” filter on the other side of the air filter box , when you had it opened to replace the air filter? is that something we need to replace? I didn’t see anyway to access that filter

[@md9359]

Did you ever find out about this? I am wondering about it myself.

[@UhhhhhnooOOo00oO]

What can I do if one of the most well known Mercedes dealerships broke the snorkle plastic clip on my car? Is it absolutely necessary to have a continuing tube to the front? Does the snorkle run to the radiator or is the plastic oval/elliptical shaped end piece nor important to be 100% attached near the front bumper?

[@justifier2000]

Remember once you open the tab you have to press on it gently then pull the connection otherwise you wont be able to and you might think the tab needs to be pulled more which it doesnt hence breaking the tab.

[@sheckel2]

Good point. It took me a minute or two to figure that out on my own.

[@TerryArthur1]

Thanks great video. mine is not that clean under the hood. Do you know if it is safe to blow off all the dust on top of the engine with air hose or water hose.

[@shariarrahman5653]

Can you post a video showing how to change Spark Plugs and Transmission Fluid and Filter change. Its hard to find videos for W212 E350. Thanks - Great Video

[@glasser2819]

the double iridium plugs and the fragile coil boots make it an interesting job not to brake anything... It seems the plastic intake also serves as the m276 engine cover. So it has to come off with its 6 intake seals. On the way to swapping plugs: do clean your INTAKE THROTTLE and the oil separator. Add to your list serpentine tensioner and plastic idler pulleys before extra damage is done

[@sorooshb007]

After how long do you have to change it?

[@RF-ww5mp]

great video

[@Colonlaw]

This works for the MB W204 2013 C350. Thanks!

[@100stars]

Mine has only one filter. My car was a 2014 certified CPO purchased back in 2017. It always had only one engine air filter. Is this normal?

[@KL-pq2sl]

Great Video ... This will works for a MB 2014 c300 sport

[@levisguy53]

indeed, my thoughts exactly! and much easier to change than on my previous 2005 C240!

[@IqbalContractor]

Please upload more DIY videos for similar Models so that people don’t have to run to dealers or mechanics. Thanks

[@kevingoats]

Very good video. Thank you for all your help.

[@sheckel2]

My 2014 E350 Cabriolet doesn't have the secondary filter (the gray one in the video). Is this normal for the US market?

[@leobthelionshow]

Do you have any suggestions to get the air intake duct to latch to the grill, im having trouble re-attaching. I thought i broke it, ordered the replacement part only to see its not broken. Any tips would help

[@michaelcurtis2373]

Do you have a video to replace the spark plugs on this exact engine?

[@wayneshanks2274]

Thanks did not know about the clic pliers

[@gregorysmith3865]

Can i use cordless screw driver

[@glasser2819]

Transmission oil service is no picnic on these M276: drain/refill plug pump refill OBD2 Temperature reading correct ATF color is blue or... ?

[@jasonb4196]

Great video. K&N just arrived dont have those hose clamp clicks pliers tho. Also couldn't help but notice the other filter in the airbox. Can that be replaced or need to be replaced? And did you see any gains in Fuel economy or HP or throttle response?

[@TerryArthur1]

Just ordered the hose clamp pliers from Amazon

[@shayan4040]

so the second filter cant/shouldn't be changed?

[@pfsantos007]

Excellent video.

[@Cccc-ky4vq]

How much should this cost??

[@musclegto]

People who have done it? Do you really need the trim removal tool to unclip the sensor?

[@brucecai2705]

what does the intake filter improve?

[@twobigjets]

Germans: Let's design the car in such a way that 95% of its owners must take it in for an air filter replacement!

[@morashid6612]

Where do you find those click hose pliers

[@mgoodwin56]

Amazon. $10

[@deewademai]

You can just unscrew those 3 screws and lift up the left side box. You don’t need to disconnect the right side.

[@jaylonhanible8167]

Do I have to disconnect the intake duct?

[@chipsmithson1678]

Have you replaced the spark plugs yet? That looks like a beast of a little project... :)

[@glasser2819]

wait until you deal transmission and the suspension parts 😂

[@waligarrett4044]

When does the other filter get replace

[@SuperSushibar]

Wali Garrett cabin air filter gets replaced when you watch the video and do it. It’s under the glovebox.

[@gufranwajidkhan1608]

How to change sparg plug2014

[@Sharpidiot]

This looks exactly like my 2013 C300 4MATIC Sport....

[@levisguy53]

it is, i think that's the first year they switched from the dual setup to the single. have the same setup in my 2014. i went with a K&N so i don't have to worry about regular changes.

[@R同学-o8f]

good one,thanks！

[@MrCee861]

Can you remove it, without taking the whole thing out?

[@johnantonopoulous6381]

Yes you can. You can swivel the box up once you remove everything else.

[@vg9878]

I don’t understand why you need to remove whole filter if you need unscrew just 3 screws and it’s way easier to replace it instead to have a deal with clamp and sensor.I just did it on the car.

[@claude77573]

You reconnected the sensor, but you forgot to push down the locking mechanism.

[@simul8guy75]

Easy? That's about the biggest PITA engine air filter change I've ever seen. I'd replace that crappy OEM hose clamp with a screw type hose clamp for future filter replacements.

[@glasser2819]

great idea but buy it from where??? This is an extra narrow strap... a zip tie is tempting 😂

[@nero2zero1]

This is especially useful now in California will all the fires

[@linhpham-rt4yi]

KIMCHI are you Vietnamese? nice work. Linh TX

[@glasser2819]

famous Korean fermented cabbage with 100x fire pepper

[@jamesdelmonte1218]

You forgot to push the gray clip back on the sensor

[@songyi9996]

감사 합니다 한국분 같아서 여기는 chicago입니다

[@pamc5628]

All that work to change a damn filter? Germans!

[@easycash1368]

I just wanna say i didnt have to pull the whole thing out what so ever. All you gotta do disconnect the 3 screws from the air filter cover and remove the part that is attached it (which is clips) then you can literally take it off without needing to remove the whole thing! 15 minute job max

[@bushmaster1740]

10x easier to just take out the airbox screws instead.