2015-2017 F150 3.5L Ecoboost Roush Cold Air Intake Review & Install

[@americantrucks]

Shop this Roush Cold Air Intake: amtrucks.at/2zwjrt4 Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg

[@therealRustyShackleford]

You don't blow any air filter out with compressed air unless you're wanting to open up the media and reduce its filtering ability.

[@williamgaunt8446]

Great job on the details you know how many videos out there that show you what to do , but don’t really show you what to do!!

[@americantrucks]

We appreciate that! Thanks for watching! -Zach

[@jesusbonilla7513]

Would love some more videos like this

[@touron119]

What happens when the seal gets old... hot engine air...??

[@keepnitsharp]

AmericanTrucksFord did you have to have a extension for the intake sensor plug?

[@remingtonkevin65]

I replaced my stock cool air intake last week with this cool air intake. This week my check engine light came on. I determined it was the pcv valve and hose. Is the cool air intake the cause of the pcv valve going bad? Could someone please let me know? Thanks!

[@gilbertdeschamps2324]

The fixation of the gasket is so so ( cut to short )

[@jerrystalzer1350]

I agree, cut too short, should’ve cut longer tucked it back inside the hollow seal removed the one pin, and pushed through both of them.

[@blueovalblood]

I have a 2017 Expedition w/ 3.5 TT ecoboost. Is it safe to assume this will work with my ride?

[@kingo6063]

Awesome

[@americantrucks]

Thanks for watching!

[@Grof2000]

any suggestion for new F150 V8 5.0 air intake exhaust .... tnx

[@mrnavy2]

Is this the same install on a 2018 3.5 Lariat?

[@CopperStateCorals]

Are you removing the Turbo silencers or keeping them in?

[@remingtonkevin65]

I removed mine. Now I have a pcv valve going bad. Could this air intake be the cause of it?

[@sammanganellojr5533]

10 horsepower for over $400 no thanks

[@kenthayer6255]

Would a drop in KN filter let the engine breathe as good ad this?

[@americantrucks]

A drop-in filter from K&N wouldn't allow your engine to breathe as open as a full kit like this Roush option show. It *would* absolutely breathe better than your stock paper filter though! Drop-ins are a really nice budget-friendly option if you aren't looking to spend a ton of money, or aren't looking at getting your hands dirty with a more involved installation. -Zach

[@EJsGameGalaxy]

I didnt get any weather stripping at all w mine

[@americantrucks]

It should have come with a seal. Give us a call, we can help with this!! --> 1-888-706-1096

[@skullznbones1]

OK, just got mine. It had a plug extender and a bracket. Where does the bracket go?

[@BenjaminSandness]

This was only needed for newer range of model years to attach harness to. Roush instructions are more complete.

[@dayleday7224]

Will this work on and benefit my Non-ecoboost 3.5L?

[@americantrucks]

This specific cold air intake *will not* fit on your non-eco 3.5L V6. You should check into the following link! K&N makes a really solid intake that will fit! -Zach www.americantrucks.com/kn-63-aircharger-1516v6.html

[@weather991]

Will this fit on the 2.7 EcoBoost

[@Brian-Hatten]

Excludes Raptor but has it on his '17? Wut.

[@americantrucks]

Correct. While the intakes (Raptor vs Non-Raptor Ecoboost) are practically identical we have a separate 'Raptor specific' part number on our site. -Justin

[@goingagainstthegrain]

Excludes raptor....Thanks.

[@americantrucks]

www.americantrucks.com/roush-performance-cai-2017-raptor.html -Justin

[@hialeahhigh]

Just a noise maker, the stock units are pretty stout

[@datapro007]

It's hard to justify $410+ for a make-work project.