2015-2022 Chevy Colorado | U-Haul Trailer Hitch Installation | 78288

[@jkaimedia]

This is what KZbin’s all about. Thank you for making this video!!!!

[@JeanSantana000]

This is gold! Thanks a lot

[@md1997]

Awesome video. Very straight forward

[@gravis00]

what about electrical

[@voidisyinyangvoidisyinyang885]

Is this pretty much the same as the TrailBlazer? thanks

[@MYCHANNEL-on1cp]

You never filled the gap that was there from the original brace, the four bolts i mean that hold the bumper on, isnt that crooked now? if you removed the origina; brace and it was inside of the bumper brace? it even looks crooked when you talk about torquing the bolts down? what brand hitch is that one, is it the same install for a 2020? thanks

[@richl2723]

The only gap I see is where the bumper attaches. Why that is, IDK. It should go right back on the same as it came off. The hitch butts up correctly though.

[@Und3rGroundRappers]

WHAT IS THE TORQURE SETTING ??

[@trailerhitches]

The Specifications Provided with the Hitch are also Linked in the Description. In case you Missed it Heres another: www.uhaul.com/publication.ashx?fileName=78288.pdf&digest=qTbgScrERS5Os0xYvkNm8Q

[@hankmoneaux713]

what exactly did this do vs the factory?

[@trailerhitches]

This hitch has the same functionality as a hitch that can be installed from the manufacturer, except at a much cheaper cost and the same or higher quality. Total weight capacity can vary slightly.

[@andrewhoffman2273]

I just installed the Curt 13176 class 3 cross member. But I couldn’t reinstall the center bracket behind the spare tire. The new one doesn’t have any location to bolt it to. Is this going to be an issue ?

[@aaronlimon4803]

So the instructions for Curt 13176 says to remove the bracket and return to owner. So according to Curt's engineers it is fine to not have the center bracket. It won't be an issue.

[@carlosventura7360]

I have a 2016 Chevy Colorado Wt 2.5L, the hitch that has factory how is it used?

[@richl2723]

Without seeing it, I assume you're talking about a bumper hitch. Just screw the ball through the bumper. Not nearly as functionable as this type though.

[@osmanmolina2428]

@@richl2723 thanks

[@181skip]

What did you torque the bolts to ?

[@trailerhitches]

Here are the manufacturer specs - www.uhaul.com/publication.ashx?fileName=78288.pdf&digest=qTbgScrERS5Os0xYvkNm8Q

[@ernestpereira3767]

The 21 mm bolts holding the bumpers on are hopelessly stuck, did you use an impact driver on this? Used penetrating oil and tool extender to no success

[@trailerhitches]

Yes, we used an impact driver. These can be torqued at very high values and will be extremely difficult to remove without one.

[@vladimirmendez6445]

porque cambiar una pieza OEM por un reemplazo, esa camioneta no tiene gran capacidad de arrastre, aunque el nuevo se ve mas robusto

[@trailerhitches]

Este camión en particular no vino con un enganche OEM, por lo que instalamos uno del mercado secundario. Y aunque no tiene una alta capacidad de remolque, puede remolcar todos los remolques de la flota de U-Hauls.

[@benjamin4827]

13mm on an American van? Gobbless 🇿🇦