2015-2023 Mustang Starkey LED Footwell Lighting Kit Installation

Bill shows you how to install a Starkey LED Footwell Lighting Kit on your 2015-2023 Mustang.
If you own a base model 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or 2023 Mustang and would love to add the look of a premium model with the My Color lighting package, this LED footwell kit from Starkey is a great alternative. The LED footwell lighting kits come with an LED light bar for the driver side and the passenger side, as well as all necessary wiring for installation. These kits are available in Red, White and Blue.
Purchase Product Here:
www.cjponypart...
Check out more Mustang LED Lighting from CJ's here:
www.cjponyparts...
Check out more Starkey parts from CJ's here:
www.cjponyparts...
Subscribe to CJ Pony Parts on KZbin here:
www.youtube.com...

[@danny.ls9]

For everyone that wants to keep the light on while driving, or basically when u turn on your head lights. You have to go to the plug behind the one he tells you with the white connector that should be laying horizontal, on that same one just do the same process but you will attach it to the thin purple wire with a white stripe, which is the parking lights wire which is connected to the head lights and etc. From there just follow the same steps and ur good to go, don’t worry if the car takes a second to “reboot” I just turned it on once and let it over night and it was perfect and ready to go in the morning

[@l.a.3330]

Does this work for a 2019? About to install this and I wanna double check

[@danny.ls9]

Leo Aviles it should but you should look online for a manual and make sure you have the same colors for the wires, once u find it, make sure it’s the one that says “Parking Lights (+)” and look through it, that’s how I found it

[@l.a.3330]

Daniel Lozano cool, thanks!

[@motorheadbanger90]

@@l.a.3330 if you installed this and successfully wired it to achieve this desired option could you let everyone know what the wire is?

[@l.a.3330]

Philip Gouldman I just kept it basic and did the install as designed lol.

[@JCTiggs1]

5:03 Cringing while Bill is yanking on the wires. Pull it out by the plug Bill! :p

[@motorheadbanger90]

Bought these in blue. Had professionals handle the install. Told them I wanted it set up so that they come on with the accessories and they stay on when I drive. They do! Not only that but when i leave the lights in auto mode, they cut on when the sensors indicate its dark enough to use the headlights! Couldn't be happier! It is possible to have these wired so they stay on while driving. just connect them to the accessories wire (sadly Idk which that is but any professional I imagine can get the wiring diagrams and figure it out). Side note: at first they didn't cut on because the battery wasn't putting out enough amps so they had to put in a relay.

[@jasper022679]

Bill always says ill be back on the road in no time. Too much pressure.

[@2loco]

Looks really good. I wish the Ford mycolor leds were brighter. They're pretty useless to be honest.

[@slyr1]

Hey brother do they make that lighting for the footwell for GT350

[@daleabcdefg12345]

How close are the colors to the My Color option already on the 2018 model? Thinking about adding this but still want to use the red light in the doors and cupholders.

[@Pump56]

I noticed a nice red trim around the stereo, doors and dash. What kind of material is that? And where can I get it?

[@ociriszues]

that is great. I can use these instructions to install my lighted door seal. I bought.. Just need to find those tapping wire thingys. lol thanks CJ

[@jasper022679]

ociriszues . I know its an old comment but for everyone else. Its called a t tap. Red = 18 to 22 ga wire.

[@Schmegil]

@@jasper022679 what do u mean red = 18 - 22 ga? As in the red wire = the wire were supposed to tap or ?

[@dylunchoate4438]

Will they stay on while the car is running?

[@shailascott6242]

Anyway for them to come on while the doors are closed

[@MrJeffy45]

The music is a nice touch to the video! Debating on! It would cost 120 Canadian.

[@maciejl6622]

Hi, in my 3.7 V6 2016 - connected wire as shown but there is no current on grey wire. What can be wrong in this case ? Should be change anything by Forscan to activate this grey wire ?

[@wallacejones8676]

What wire do you use to keep the lights on when you are driving?

[@danny.ls9]

Wallace Jones For everyone that wants to keep the light on while driving, or basically when u turn on your head lights. You have to go to the plug behind the one he tells you with the white connector that should be laying horizontal, on that same one just do the same process but you will attach it to the thin purple wire with a white stripe, which is the parking lights wire which is connected to the head lights and etc. From there just follow the same steps and ur good to go, don’t worry if the car takes a second to “reboot” I just turned it on once and let it over night and it was perfect and ready to go in the morning

[@codenamesquish9421]

Daniel Lozano is this for a newer model like a 2017?

[@danny.ls9]

Codenamesquish it should be but you should look online for a manual and make sure you have the same colors for the wires because mines a 2016, and once u find it, make sure it’s the one that says “Parking Lights (+)” and look through it, that’s how I found it

[@theboy2214]

@@danny.ls9 So it’s the purple wire with the white stripe on it?

[@noodlum-6302]

Can someone please tell me what wire to splice I want them on when the headlights come on and stay on

[@Greg_call]

Thank you.

[@nasomaz]

Do you guys sell the red piping insert ??

[@bradz2451]

that does look good

[@foxchase725]

nasomaz I wanna know where to get that too

[@geovannymoya9474]

Could I use this exact same kit on my 2016 5.0?

[@Zerogivengarage]

yes

[@nghiale2193]

is it turn off when i turn off the engine???

[@josueantunez4639]

What wire do I use because I only have a grey and blue tracer or a brown and purple tracer or a blue and purple tracer on there ? Need help ASAP

[@cheyenneobregon184]

Josue Antunez did you ever figure it out?

[@mplusnetworknanji1812]

2019 mustang RGB light in wired, not starkey and this wire connect.

[@motorheadbanger90]

Do the lights stay on while driving or only when doors are open?

[@cjponyparts]

Only when the doors are open. You can wire it other ways it you want options.

[@motorheadbanger90]

@@cjponyparts Awesome! So is having it only come on with the dash lights/headlights an option if you want them to stay on while driving? Do you think they are too bright to leave on while driving to the point they're distracting?

[@dpt4402]

They should have a kit like this for the trunk

[@DustyShedGarage]

All you need to do is just get this kit and a few lengths of wire and do it your self. Would be a good project

[@ThePain223]

b. b bbb bb. bu bb. bDusty Shed. b b bb. b b b bb b b. b b. b. b b Gara ge uu guyb. b b. b b b b b. b hiiub. juij jbjj

[@TheAndyPKay]

Retrofit on a 67? :)

[@Zerogivengarage]

+TheAndyPKay It is just a power and ground so you absolutely could. We found the puddle light kits we sell for the 05-10 cars fit perfectly in the factory underdash light brackets on the 65-70 cars

[@mememetal666]

That is the incorrect wire

[@SOxFR3SHH]

Lol. Just get a premium package 😂

[@johnbbrose486]

Lol, Ford doesn't make a premium v6, so it's not an option.

[@rueben44]

They don't offer one and what if at the time someone could not afford one. SMH.

[@B0st0nftw]

Just another fuck boy on KZbin lol