2015 5.7 hemi harmonic balancer puller made easy peezee! No stress!

[@andrewschoenfeldt5620]

Thanks. I used that puller but my 1 hook kept slipping. Instead I took each jaw off. put the jaw in the halfmoon holes sideways and rotated straight. ones all claws were in i reattached to the furthest holes so I could fit my puller in between the claws. puller bolt was then too short so just put a deep socket on the crankshaft side to give the bolt more reach. came off like butter.

[@bbruno1973]

thanks for the video!!! Man we went round and round trying to get this stupid thing off. So headed to Harbor Freight this morning. Picked up a set of cheap pullers. Grabbed the 6". It worked ok but kept slipping. I put grooves in the fingers. Game changer. Put a lip on each finger to grab and that made all the difference.

[@LaRelicHunter]

Great idea!

[@andrewschoenfeldt5620]

Thanks. I used that puller but my 1 hook kept slipping. Instead I took each jaw off. put the jaw in the halfmoon holes sideways and rotated 90degrees so it was straight. once all claws were in i reassembled the puller in place and to the furthest holes in the claw, so I could fit my puller in between the claws. puller bolt was then too short so just put a deep socket on the crankshaft side to give the bolt more reach. came off like butter.

[@bunkertattoos7814]

Awesome video sir.

[@jeremybrannon5358]

Good video did the same delete with mine pulsar was great

[@buddyluv4200]

Was that a smaller bolt you used?

[@johnsotello9802]

Cal van makes a adjustable 3 claw puller been using it here at the shop for all the 5.7 part number 38000 never had a problem with it

[@spencerwillis6866]

Thanks brother 🤘🏻

[@russellblock1768]

How is it running after doing the fix? Kind of made me nervous to throw a new cam in there when the old cam lobe is all ate up. Thinking all that ground up material from the cam lobe was likely to have worked it’s way into the cam bearings somewhat. Son’s truck, ex wife’s money…. Decided to just get a new reman motor.

[@LaRelicHunter]

The truck now has 16k more miles since new cam. When I tore it down I inspected the cylinders and still had nice cross hatching and no lips. I have ran mobile 1 synthetic since day one. I changed out the oil pump and changed and flushed the oil 3 times after work. It’s running better and sounds better than when it was new. I guess I caught it before any damage. 3k total including the delete and tune.

[@duaneanderson6198]

How hard was it to get the bolt out?...was it reverse thread?

[@Mimiandfriend]

Easy if you have any kind of impact. A cheap Chicago electric will do. And no it’s not reversed threads

[@douglasbakerjr6706]

Do you have a link?

[@HappyHermitt]

I'm in Butte Larose, St. Martin Parish. I'm 51 and just ordered my first detector, a Nokta Makro Simplex. I have some places in mind and hope to get permission. Until then, I'll be learning this new hobby and detector. Are there clubs here? I moved here from Denham Springs after the flood. We got hammered.

[@LaRelicHunter]

It’s a fun hobby. I live in Denham Springs La. I also own Gulf South Detectors When your ready for your next machine let me know. Good luck!

[@HappyHermitt]

@@LaRelicHunter I lived in Southport, on 16 going towards Port Vincent.. My kids are still there. I'll def keep you in mind. I'm itching to go on a hunt. I have a few spots in mind in Iberville Parish, where I grew up. Have a great weekend...

[@JWSGZ]

Hi bro, we are looking for collaborators for our new taillights. Are you interested in learning more details?

[@Unknown283]

You have part number by chance?

[@LaRelicHunter]

Yes Performance Tools Part # S45C 6in 3 Jaw’s