2015 Citroen Relay HDI 2.2L Diesel Clutch Replacement

[@WMCS]

www.williamsmobileclutch.co.uk Thanks for watching. And for all the feedbacks K-A. Williams.

[@vladogaspar2552]

Hallo, Im from Slovakia (Europe) my Jumper Broke Down in Berlin and I must to repair the clutch by myself because the service is too expensive, Your video helping me to repair it correctly. Thank you 👍❤️

[@jasperbarlow2582]

I like his videos, he doesn,t talk or play annoying background music.His bench press technique with that bell housing/gearbox is impressive, i tried something similar when doing my relay clutch, nearly had a hernia. He also goes the extra mile lubricating the release bearing fork, good job, i would hire him if i wasn,t mechanically decent myself.

[@frfrpr]

The filming and editing is really good. Thanks for that. This is one of the best business models I've ever seen. 💰

[@WMCS]

Thank you for the feedback. Really appreciate it.

[@kervinwillmott2313]

The dogs *****$$* what a guy! How on earth your body is not damaged is beyond me. Keep up the great work.

[@SigloXXGarage]

Hi men! Congrats for your job. I'm mechanicman, and work in my house and have the workshop here. Never give up for a Dreams... never lower your arms. Hug from Buenos Aires, Argentina. 💪🏼😎🧰🔧🪛🔩🔨🚙💷

[@WMCS]

Thank you Claudio. Really great to hear from a fellow mechanic. I really appreciate your feedback. Argentina 🇦🇷 is a country I would really really like to visit for the steak 🥩 and beer 🍺

[@SigloXXGarage]

@@WMCS The day you can come, you will not regret it!! Hug 🍻😎

[@danielleech1988]

gonna change the engine on mine soon, this is helping a lot, your videos helped me do the clutch in my expert a few years ago

[@Omegaman1969]

Man this guys a beast ! Holding the gearbox with one hand whilst doing up bolts with the other.

[@WMCS]

It was a heavy D that box. But went in nicely. Thanks for the feedback 🍻🍻🍻

[@juliandavies1974]

If you can slot the imput shift correctly, its not as hard as it looks!😉😉

[@Omegaman1969]

@@WMCS you’ll be bench pressing a van in the next video 🤣👍🏻

[@moraisalmeida6163]

QUALIDADE,EFICIENCIA E AGILIDADE EM CADA SERVICO EXECUTADO!!! SHOL DE BOLA!!!

[@grahamjohnstone3483]

Excellent video again. Just spent 3 days under my boxer 2.2. Your video disguises what a tight and messy design it is around the gearbox (especially the hoses). Probably the result of trying to fit a transit engine into a fiat/citroen/peugeot engine bay. Well done.

[@moraisalmeida6163]

SOU MECANICO TAMBEM E FICO ADMIRADO COM SUA EFICIENCIA!!! SUCESSO CADA VEZ MAIS POR AI!!!

[@chris.dressner]

Lieber Kevin, tolle Arbeit! Ich schau deine Videos schon länger, und jeder der mal eine Kupplung gewechselt hat weiß wie schwer ein Getriebe sein kann. Vor allem die Getriebe vom Ducato, Jumper, Boxer. Liebe Grüße aus Deutschland / Leipzig Mach weiter so 👍

[@kolibriorvil1]

Congrats for putting so much effort in this and also for the additional time and energy spent on filming and edditing videos so you can show it to us. I am wondering how many jobs per week do you normally take? I am looking forward to chainging my job and start working on cars too and want to know if it is worth it at the end. Cheers from Bulgaria!

[@derekburton945]

fantastic job you made a difficult job look easy , i did my Citroen relay 2014 clutch last year and it took me two days my mistake was i couldn't get it lifted high enough up and support it safely and i struggled with the gearbox . I tried numerous garages but no one was willing to do it so i had to do it myself ! . total agree with all the comments on your content top work .

[@WMCS]

Thanks for the feedback much appreciated

[@Mrhairbag]

THANK YOU VERY MUCH FOR THAT VIDEO! Without you i would not have dared to change the clutch on my citroen Jumper. It took me 2 Days but i made it, it runs beautifully now! So happy! Also i dont know what kind of arms you have to lift that gearbox like that. Holy guacamoly.

[@TechBru22]

Top quality work 👍 those gearboxes are not light to be lining up on your own

[@WMCS]

They are quite heavy truth be told. Not one to let dangle above your head for too long.

[@flash4eva123]

Great video. There does same to be confusing information on if these vans have sold or dual flywheels that looked like a solid flywheel. My reply is a euro 5, 2013 2 .2 , 130 bhp. Would know which one

[@moraisalmeida6163]

PUTIZ!!!! TRABALHO DA MAIS ALTA QUALIDADE,PARABENS PELA EXECUÇAO!!! ME CHAMA A ATENÇÃO O FERRRAMENTAL QUE VOCE USA NOS SEUS SERVICOS!!! SOU AQUI DE FORTALEZA-BRASIL!!!

[@finndling]

Hi Kevin Albert, Thank you for the interesting video about the removal of the clutch. Since I am currently expanding my Citroen diesel engine (Ford Puma), you have helped me a lot. Best regards from Lake Constance, Hanns

[@WMCS]

Herr thank you very much for the feedback… have a great day 🍻

[@brianmason8400]

I'm new to watching. Been a mechanic for a few decades myself, glad to see I'm not the only one that uses my leg to operate the jack while laying under a veh.....lolol.... Anyone who knows cars can obviously tell what you're doing at any given time, but I'm just curious why you don't "talk to your audience" while working? If it's just you want to "get in-get out", then understood. GREAT job all the time! Stay safe!

[@WMCS]

Very simple I’m just filming what I’m doing rather than instructing. I believe people are way smarter than what we’re led to believe ourselves.

[@redouan8888]

Great job 👍! I have a question. Do you also replace the clutch of an automatic gearbox? are there any videos of this?

[@graemepiper7425]

Yeah the comformatic in the 3.0l ducato

[@matsgustafsson46]

Very good work. Impressed by it. And that the word I use when drop a bolt down in the dark. Isnt for church the expressions.

[@jesussegovia2430]

Buen trabajo amigo, desde México .

[@ismailalijev5732]

great video tutorial without a single word

[@gklept]

greetings Kevin from Greece.You are a specialist.i want to ask you in a fiat ducato 250 (2013) ,i unscrew all the screws of the gearbox but i can not take out it.only one centimetre.i can move it but not tske out.what i am doing wrong? maybe it must be in neutral gear?

[@JMReyes]

Eres un héroe 👌

[@hubertmaulhofer2536]

Allein und ohne Bühne...Hut ab!!!

[@blairguinea6811]

Kevin-Albert William you are the boss, great job as ever Sir

[@WMCS]

Thanks Blair have a great day

[@javaidsadiq5775]

Very hard worker. Have you ever done a Saab 9-3 1.9 TID? Its same engine as Vectra c diesel. If so do you have a video on that? I'd get you to do it but I live all the way up in Manchester so want to have a go myself. Dont trust garages but you're passionate in what you do and do it right. I've done a MK6 Golf GT TDI before but cant find any videos online step by step how to do a Saab 9-3 1.9 TID

[@graurionutb]

How long it takes to do it? The clutch without recording? Tks

[@Majstor-hp8qn]

Great job Kevin, have a great day, Sunday day for the rest after that job

[@WMCS]

Thank you and you too .., happy Sunday.

[@graurionutb]

This video is good even for Citroen Relay 2013 and 2014?

[@jorgemongesilva]

Quality work kevin instalación perfección 👍👨‍🔧bravo

[@WMCS]

Thank you Jorge.. and good day

[@mathewwilkinson2834]

What happens if you dont do clutch in a day? Do you go back the next day to finish it as we all know you travel some distance to do them

[@thei-bien]

very interesting to watch; Real craftmanship

[@adamb8726]

Man I have done these on a lift and there hard enough, your a beast doing them on the floor💪. Do you charge per hour when pricing or depends on the vehicle? Great video as usual 👌

[@WMCS]

Thanks for the feedback.., I charge per job. Because I get most of them done in the 4hr mark.

[@adamb8726]

@@WMCS that's fair. 4hrs is pretty good going on the floor, makes me feel slow and I get to use a ramp🤣. Probably all my cups of tea don't help my time scale🤔😅

[@DaveGreeneramblingcarpenter]

@@WMCS 4 hours is amazing, fair play

[@joecampbell5842]

Hey Kevin where are u based I need mine doing and what this cost

[@N269]

I am really, really impressed. These guys can work on my van any day! Question: @55:33, what are those little black caps for? Where you inject oil??????? Are these a routine maintenance item?? And, as others have stated, great, great production and most informative.

[@chriskingston4256]

That is refilling of the gearbox oil

[@N269]

@@chriskingston4256 Thanks Chris.... is there a vid where you change the gear oil and show this "trick"?? Thanks again. Best

[@chriskingston4256]

@@N269 Probably. However, if you watch this video, eary on he undoes a sump plug on the gearbox (square bit required by looks of it) drains the oil out, this is so it doesnt leak out when removing the driveshafts. But if you wantd to do a gearbox fluid change, just drain it out of there and refil it from the top "black bung" as you referred to.

[@austinpowers2k9]

An absolute artist 🙂

[@kylehughes3850]

I got to do this now not looking forward to it at all haha thanks for the video bud

[@CEZETDEDY]

Hey, Kevin, can you tell me what this red Vaseline is and what degreasing product is in your bottle? thanks

[@WMCS]

Hi Radek.. it’s red rubber grease

[@RobertBosch9397]

Morning Kevin, all the best from Holland 👌😉, do you never use the sac tool during clutch installation?

[@WMCS]

Morning..🔥🍻.. that is the only clutch alignment tool in my arsenal .. believe it or not that tool has fitted 3522 clutches 😁🥇

[@RobertBosch9397]

@@WMCS I bought the tool a couple of years ago, but used it twice or so. Since then, I only use the same midlock tool🤣. Perfect job mate!!

[@marcoocone1781]

Not human, even my fiat 500 gearbox is heavy for me, I guess you are a bodybuilder, but anyway good job done and thanks for sharing

[@WMCS]

Ouff.., never seen the inside of a gym before. Just hairy chest 😁🍻

[@rodrigodesouzafernandes4592]

Great job Greetings from Brazil.

[@romainberger]

Good work, you're good at that!

[@marcinagnieszkamaks7546]

Co to jest za smar czerwony? Pozdrawiam jestem pełen podziwu,dzięki tobie będę się brać za wymianę sprzęgła w Berlingo MCP sam w garażu pozdrawiam

[@365mechanical]

Hey mate can you do a hyundai iload H1 d4cb engine 2011 2.4 diesel manual DMF.

[@STCH-cc1hc]

안녕하세요, 전 한국인 입니다. 노상에서 미션정비 하시는걸 보고 저도 자신감이 생깁니다...^^ 쉐보레 cruze 차량도 영상한번 올려주세요~~

[@g.b79]

Why Citroen Jumper in Uk is name Relay?

[@ferencpalfi4450]

which type do you like best?

[@stephenolley1861]

Brilliant video

[@eoghanhennessy443]

Mechanic by day 👨‍🔧ninja by night 🦹‍♂️

[@WMCS]

😜 hehe..😁🏄‍♂️

[@mattsilver8519]

Morning Kevin thank you for the upload have a great day 👍

[@WMCS]

🥇.., have a great Sunday 🍻🍻🔧

[@Spaceforcar]

The Best!!!

[@mickd802]

Great job I’m hoping you put a vid on of a movano year 2016 as mine needs doing

[@WMCS]

Yes. There’s one on the channel already. 🍻

[@95Jester]

No way.. i'm a mechanic myself, and oftenly working in spartan conditions, but surely would shit my pants if i had to lift up that heavy tranny from my chest. Keep it up mate! 💪👨‍🔧

[@TheCack1000]

This man is f..king brilliant 👏👍

[@WMCS]

Really appreciate the feedback 🍻🍻

[@ferreiramiguel2910]

master William

[@CésarMeléndez-r5h]

Good job

[@abdoudrici1939]

Thanks again

[@user-kg2po3kv8h]

Bom dia seu trabalho é excelente .. que pais é esse que vc trabalha

[@WMCS]

Ok.

[@brianhewitt8618]

UK

[@rodrigodesouzafernandes4592]

Inglaterra.

[@maxthecaddy8451]

and that's a thumbs up from me mate 👍

[@WMCS]

Thanks Mike. Have a great Sunday mate.

[@Breath_of_Rain]

Alone make great job 👍

[@dineshgurung9391]

How many clutches do you do in a day

[@WMCS]

Just one mate. Uno

[@markwilliams2830]

Enjoyed this one Kev ,but what a faff? Why do the French make everything so awkward!!! Thank goodness for the Wobble Drive I say.Always enjoy watching your skills and the trouble you take in making these Videos so interesting to watch.Best Wishes

[@WMCS]

Good point if it wasn’t for that wobbly I would not have managed the couple of bolts right at the back. Could get a ratchet on there to have enough leverage to crack it. The spanner would have rounded it off.., and the two retaining pin that holds the driveshaft in place. A very very bad design. Most manufacturers put a clamp with two 13mm bolts over it. But that pin system always rust in place and breaks as soon as you touch them. So lots of WD40 was needed to avoid any mishaps.

[@xflexxx2996]

Super!!

[@WMCS]

Thank you

[@brunoklein4632]

Este câmbio é bem pesado . Tirar não é nada ,o ruin é erguer e encaixar de primeira .

[@WMCS]

Yea 🍻

[@josefzaruba1592]

Borec 😉👍👍👍

[@javieralvarez9146]

👏👏👏👏👏👏

[@furqatabdujalilov8346]

👌👌👌👍👍👍👍👏👏👏

[@WMCS]

Thanks.

[@sasapavlovic5453]

💪💪💪💪💪👍👍👍

[@stefandiesel9218]

24:11 very strange so a rusty Clutch🤥🤥

[@WMCS]

It’s a big bell housing so lots of moisture

[@stefandiesel9218]

@@WMCS Or the french box crossed the kanal directly over the sea!!!🤣🤣

[@cirkin2876]

🙋‍♂️🙋‍♂️

[@WMCS]

Hola hola 👋

[@albertdupond7399]

Le vent dans le micro : c'est pas Top

[@JanKowalski-mp9hm]

Brawo dla ciebie 💯