Oil line gasket www.amazon.com... Turbo to manifold gasket www.amazon.com... Exhaust manifold www.amazon.com...
Пікірлер: 42
@e.b.67663 жыл бұрын
At 60k the O-rings are most likely good. However, the original shape has been altered due to use. With that said the chance of you getting it back on exactly the way it was previously seated is slim to none. Best to replace every time you disconnect an O-ring. I’m in helicopter aviation maintenance, so that philosophy has been drilled in me.
@marc-andrelachapelle98993 жыл бұрын
So, you were able to do the driver side without removing the cab, it’s amazing. I have to do mine and I was discouraged based on the comments on the net. Thanks for sharing
@jimhendrix77764 ай бұрын
That's probably FORDs recommendation...
@dontask89793 жыл бұрын
Best penetrating oil I ever used is "Free All" try it and you will never go back. Its more for rusty bolts then door hinges.
@ELCHACA2 жыл бұрын
140,000 miles And my 2014 eco needs it already, pulling 13,800 toy hauler ;)
@cheizaguirre5494 Жыл бұрын
Did you end up doing it ? How it go ? Any tips ?
@apersonwhoisaperson3 жыл бұрын
Thanks for this. My ‘13 has a warped manifold so I’m planning on changing out both of them.
@cheizaguirre5494 Жыл бұрын
Did you end up doing it ? How it go ? Any tips ?
@maksymdistrict2 жыл бұрын
Actually T47 for the exhaust manifold and T45 for the oil line. I took off my left turbo and exhaust manifold today.
@vitopannucci2001 Жыл бұрын
Really? I used a T50 on the exhaust manifold bolts on my 2013
@kurkrogers31284 жыл бұрын
All of that work for that. Should be looking into bigger turbos soon brother and some real manifolds through full race
@Ocho-Eco3 ай бұрын
Any pointers for the ac unit? Heard other ppl talk about this. I just got my BDdiesel manifold and turbo kit. Thanks for the pointers
@e.b.67663 жыл бұрын
Btw, u are going to get the truck tuned, correct? Won’t get the full benefits of the install without a little programming.
@ericwoodruff58822 жыл бұрын
what kind of socket are u using, I can't tighten mine down at all
@marklogan47164 жыл бұрын
In your video, you mentioned that there are more detailed 'step-by-step' YT videos for this installation. Could you share those please?
@_willalexander.884 жыл бұрын
kzbin.info/www/bejne/aaOcXoiKlJier7s I'm also about to upgrade my turbos. I'll try to do a complete video guide.
@prestigemechanical11453 жыл бұрын
Always the dang wife ALWAYS !
@colliswilliams89923 жыл бұрын
I'm glad I watched this before I completely drained my coolant. If it's unnecessary, then why bother?
@jaandel13 жыл бұрын
You should drain both coolant and oil
@colliswilliams89923 жыл бұрын
@@jaandel1 yeah, but you don't have to completely drain your coolant. If you drain the coolant by pulling the turbo line, you're only removing maybe half of what's in the entire system. It's less coolant you have to put back in, and I'm cheap.
@jaandel13 жыл бұрын
@@colliswilliams8992 i did fix a return coolant line turbo fitting and pipe.. no matter what you do you will lose 2 gallon which its the same amount that you loose when you drain the coolant... cheap yeah 20 o 25 ( included $1. Destilated water) buy the concentrate coolant 1galon + 1 galon water.... btw if you go the dealer for system flush they never do that they scammed me they just drain and pour new coolant and cleaner $200 plus taxes.... and i was like you sceptical about gallons i asked for a flush yeah we did... they stated..
@tagle28184 ай бұрын
@@jaandel1why someone would go through all that work and leave old coolant is just retarded. If they just recently changed it I could understand.
@jameskorotko18783 жыл бұрын
Did you feel any difference? Quicker spool up?
@TheRealRustyRider3 жыл бұрын
Did you need to do a tune? Motoroso told me I need to do a tune with the manifolds or the engine wouldn’t run properly.
@_willalexander.883 жыл бұрын
You don't need to do a tune for this. At the least I would reset the KAM and let it re learn but you don't need to do it if you can't. Tuning is just fine dialing it and getting the most out of it.
@nathanjackson3133 жыл бұрын
What’s the benefit of these over stock?
@_willalexander.883 жыл бұрын
Check out there website. It's basically what headers do. Bigger ID better flow.
@kurkrogers31284 жыл бұрын
You still running vta mod? I’m starting to get what seems to be compressor surge or a shot e-bov have you experienced anything like that
@_willalexander.884 жыл бұрын
Are you referring to sporadic purging? If so, I was having that and went back oem. Recently I wanted to try it out again bc I missed it. Narrowed it down to this, if I accelerate over 2k, it slightly purges after it changes gear and even when the TC locks. If I keep it below 2k it won't purge. I think this is normal operation. Not sure if the tuner can adjust this for the EBOV.
@kurkrogers31284 жыл бұрын
LETMELIVE any plans for the turbo smart turbos sonic?
@Teeraww303 жыл бұрын
What is your current 0-60?
@_willalexander.883 жыл бұрын
Not sure but I will find out! My guess is 4.9 or so. I got oem tires that are nearing replacement so might be hard to get an accurate launch.
@ScottieBMan4 жыл бұрын
Good job bro! You getting a lot more spool noise?
@_willalexander.884 жыл бұрын
I don't really think so lol. I think it slightly deepened the tone though. Happy so far, feels like it just breathes better now.
@AndrewIrizarry3 жыл бұрын
Heard about these warping. How are yours?
@_willalexander.883 жыл бұрын
Solid bro
@chrisv12192 жыл бұрын
My stocks did. Had these installed and now they’re warped.
@cesarlopez-pt2ew3 жыл бұрын
Don't blame the wife.
@843cuh92 жыл бұрын
Dam bro why wife yelling at you
@jlmaster1 Жыл бұрын
They literally look identical to stock lol
@_willalexander.88 Жыл бұрын
That's the good part for warranty reasons. They wouldn't know there bored out.