2016 Chevy SS with a Procharger,10 psi, LTs with Green cats to stock mufflers, BTR Red hot cam, E85

[@Tax_Mny]

BTR needs to sponsor you guys. This is the most REDHOT cam coverage on KZbin. BTR themselves don't even have much info on this cam. 🤦🏽‍♂️

[@nufnuffz28]

LOL, we love the cam, so trying to see how it performs in a lot of different scenarios!

[@Tax_Mny]

@@nufnuffz28 We definitely appreciate you guys putting them to the test 💪🏾💪🏾

[@Chris-nu6zs]

@@nufnuffz28 Best coverage on the cam hands down

[@erikradzins]

LOVE seeing this guys! I did almost a twin to it on my channel a while back, however no E85. Such a great combo on these cars!!!!

[@nufnuffz28]

Couldn't agree more! Thank you!

[@ericordemann5806]

Eric I’ll have something for you to play with late summer, similar build way different car 🍻

[@duanerudder6834]

Great job guys. Strong numbers.

[@nufnuffz28]

Thank you!

[@charlesturner5195]

Liking the longer vid..💪

[@nufnuffz28]

Thabk you. Trying to do more filming for people to have a little something more than a pull to watch

[@wes9515]

Great video with some really good information.

[@nufnuffz28]

Thank you!

[@nightranger3430]

Good stuff & tempting!🤔 Look forward to hearing from ya’ll on my ported intake & corn upgrade quote…Later bros!!👍🏻

[@nufnuffz28]

Best way to make big power. Upgrades will be same cost as we talked on the phone... but will get something in writing for you soon as well...

[@HPKPerformance]

You guys really are slapping this cam in everything lol

[@nufnuffz28]

Trying to see how it performs in all Scenarios!

[@HPKPerformance]

@@nufnuffz28 I definitely appreciate your page, like that dude said you have more info on this cam then BTR them selves. I actually have one waiting to go on a blower SS build coming up, hence all my questions haha. Lets see if i beat you to it 😅😂

[@nufnuffz28]

@@HPKPerformance lsa?

[@HPKPerformance]

@@nufnuffz28 Negative, Harrop TVS2650. So you still need to find a LSA build for one of these haha.

[@nufnuffz28]

@@HPKPerformance nice. Roots, close enough for now! Haha

[@jplperformance9073]

Cool setup and video

[@nufnuffz28]

Thank you!

[@pettymang8242]

I wonder how this cam would do with a lsa setup …get job fellas with putting out the info on this cam

[@nufnuffz28]

Probably just fine. Would still like to see a 2600-2800 RPM converter with it

[@peteg9396]

Fucking sick!!!

[@nufnuffz28]

Thank you!

[@YazminChavez-nx3uh]

😍

[@cincysilvia8807]

how are IAT's? im looking at going procharger but heard they eat belts and have horrid IAT's.

[@nufnuffz28]

Totally incorrect. Ists are much cooler than LSA and we have had 1 car lose a belt and it was simply needing adjustment as he didn't do it since the kit was installed

[@cincysilvia8807]

@nufnuffz28 that's good to know. I was concerned it was taking in real hot air but im also a noob with prochargers

[@geerstyresoil3136]

LS3 forever

[@nufnuffz28]

💯

[@heavyschevys7333]

"Fast 85lb injectors" Worked with handful of those yet? Seem to be hit or miss for me. I charge extra for those.

[@nufnuffz28]

Seem good for up to this level, but not too much more. We have used 20 plus sets without issue! I'd say 95% of the cars on the channel with E85 have them.

[@heavyschevys7333]

@@nufnuffz28 Are you guys using deuschworks data for the injectors?or did fast finally pony up and get injector data? I respect what you do. I'm out here doing the same. Wish y'all great success in this industry.

[@nufnuffz28]

@@heavyschevys7333 man, unfortunately, as you know, no real data. I appreciate your comments and the dialog as we all learn together. Anyway, Recently I use a mix of ID 850 data and stock stuff, scale the IFR and usually always come out pretty well as we have done so many. On the older E38s, of course I double the stoich and make a few small changes to get them close. They are probably some sort of decapped stock injectors, so minimal changes seem to work out good for me. Thank you!

[@baby-sharkgto4902]

So far all of my builds I have used the FAST injections. All good in the hood. I do not do the tuning so I can not speak about that angle.

[@stevenbiggs4508]

Noticed the NC tag. Where are y’all located?

[@nufnuffz28]

NC!

[@nufnuffz28]

We are located in central Nc

[@jacobgiesbrecht7806]

What would you choose on a pump gas street car, the p1 procharger or the torqstorm?

[@nufnuffz28]

P1

[@devonterogers9447]

Love the content. Been trying to get into contact with the shop for some work. Are you guys closed until January. Is the number on google accurate. Thank you.

[@nufnuffz28]

Yes, we are pretty busy though. Whatcha got?

[@devonterogers9447]

2018 c7 z m7. Looking for a light build. Lt’s and mid pips, catch can, maybe pulley down and e-85

[@nufnuffz28]

@@devonterogers9447 sounds good. Will reach out soon here if we can't find any other info for ya! Thanks

[@Camaro254]

Very nice job guys! I wanted to know what cam you recommend for me for a street cruiser? I have a 2014 Camaro SS ls3 and I was told I need a three quarter race cam or maybe even a half race cam, I don't want a full race cam because I won't go to the track.

[@nufnuffz28]

Depends on your goals

[@kennyhayes8488]

I have a 2014 ss an I'm going with a stage 3 BTR cam.i have heard it an seen how it poforms an it's bad ass an it's behind a auto they did cam only they use the stock lifters an stock converter.it sounds bad ass

[@Camaro254]

@@kennyhayes8488 nice, I'll probably go with a three quarter race cam and not the full race cam.

[@nufnuffz28]

@@kennyhayes8488 sounds nice, but I'd not so a BTR 3 with a stock converter...

[@twinturbo421]

Name of the shop please?

[@nufnuffz28]

Blazing High Performance

[@flexo.__]

Do You Think This Cam Can Perform Well With A 3200 Stall ?

[@nufnuffz28]

Yes

[@rodneys9805]

is ring gapping necessary?

[@nufnuffz28]

OK at this level 👌

[@rodneys9805]

@@nufnuffz28 awesome man, do you think 11/12 psi is safe no ring gapping