2016 Ram straight piped

This is a 2016 ram 2500 with a 5 inch straight pipe tuned by PPEI with the EZ Lynk system and a DSP5 switch

[@CatchMeOffroad]

Bit of incorrect info...turbo is actually a VGT (variable geometry turbo), and the vanes don't change direction like a VW tdi engine; instead the nozzle slides axially to change the exhaust manifold pressure, which results in higher or lower shaft speed and boost pressure. Otherwise great video!

[@kdthesinger8286]

Tell him to do the hellcat

[@lowestyet]

Correct. VGT. Used to build these bad boys in the factory.

[@CarlosRodriguez-kh3df]

These new rams are great, good power, reliability , and the Laramie package Is awesome

[@jordanmacdonald9715]

That poor cyclist when you passed by and seen him leaning out the window with the camera was probably like: 👁👄👁 “fuck”

[@Clutch4IceCream]

It’s not a dodge, ram is now its own entity like fiat. Notice none of the 2014+ rams have no dodge lettering above the rear ram logo

[@1smokan]

How about a Cali style stealth delete were you walor out the cat and DPF, leave it all connected but turn it off in the computer? I whant to do this to my truck and my 8.9l cummmins on my Motorhome.

[@kyleholstrom3490]

Still a Dodge in my book

[@junky4x4]

Yep, better than any GMC money can buy

[@sticrzy123]

Kyle Holstrom point is RAM will be running long after that ole Ford Stroker or Dirty max crapped out 😁👍🏼

[@jacoblawrence9849]

The truck is from the same state i live in surprised that he drove all the why out there

[@josephgaleas7223]

I think they just register the truck out of state so they don't have to "follow CA's emissions laws" I could be very very wrong.

[@danieldaubman289]

Have you had any experience/know if the 5” exhaust will fit a 2017 ram 3500 SRW quad cab long bed with the factory air ride ? I don’t have the rear sway bar or the other bar that goes across ?

[@natey891]

pure michigan plate baby!

[@jdsmith556]

Praise be to Jesus this wasn’t a couple of douche canoes looking to roll coal. Great video and the lack of black smoke shows it’s a pretty good tune.

[@pinarellorider9023]

Another great truck vid bro! Hey Eddie, did you delete your truck PRIOR to the warranty running out and which delete kit did you use?

[@EddieLife3500]

Pinarello Rider thanks brotha and ya I deleted my truck when it had 36 miles on it and I used a 5 inch flo-pro exhaust and tuned the truck with PPEI tuning with the ez lynk system

[@EddieLife3500]

Pinarello Rider my truck still only has 25k miles right now

[@sticrzy123]

New 2.0 Ezylink is out now

[@bsharris67]

Is this truck using the stock Ram intake or has it been changed out for an S&B or something like that? I'm about to delete and I see 50% say to change it, 50% say not to. Thanks

[@EddieLife3500]

this trucks intake is stock

[@robertenriquez6523]

Where do you recommend purchasing a delete package deal? Got a 2012 ram 2500 Cummins looking to get EGR delete, 5 in turbo back exhaust and EFI for programmer with HPP or PPEI and csp5 switch for tunes. Would really appreciate your feedback, thank!

[@EddieLife3500]

I would call synthetic motor sports and they will help u with everything u need ask for Willie tell him eddie sent u

[@diegosimental3586]

On the new Denali whats the plans for the truck ?? Are you building a SEMA truck like you said in a video????

[@EddieLife3500]

maybe not sure yet

[@blessedandtalented113]

Lol people do get offended about the whole Dodge/Ram deal. What was the total cost for this delete? I agree with you about having the reclining seats in back even though you don't sit back there 😁

[@bigchiefl1285]

I have a 2018 with factory air suspension and I can figure out how too make it fit without the exhaust touching the bags how did you do it?

[@EddieLife3500]

You have to just keep the exhaust system all lose and spin the exhaust around until it is positioned away from the bag

[@bigchiefl1285]

@@EddieLife3500 Awsome thanks !! I will give that a try !!🙏🏻

[@Shane-55]

Any issues with the 5 inch with the airbags flo pro say the 5 doesn't fit with factory air ride

[@EddieLife3500]

no sir it fit right in

[@Shane-55]

How much clearance from the airbag do you recall I was gonna wrap that part in header tape

[@EddieLife3500]

i want to say about an inch it does get close but does not touch

[@jovannybecerra1731]

Sounds great , i have a 18 ram 2500 how much does it cost to delete and tune with the mm3 tunes

[@moose5.9]

Flush mounts are far away better looking. And spending 65k or more on a truck I'm not having shit hanging off it lol

[@JuanTorres-df9gt]

Hey man quick question so I have a 2015 ram 2500 would it be possible just to delete the exhaust and still run the ezlink. And so the egr delete and all that later ??

[@brendaleetv]

Did you get rid of the CVV crank case tube that went to the turbo too?

[@EddieLife3500]

yes

[@christophermartinez431]

How did you get rid of the cvv crank case tube? Just unplug?

[@adrianran951]

Hey Eddie I just subcribed, awesome videos by the way, I have a quick question my dad has been wanting too delete his dodge as well it's a 6.7 dodge, basically do everything you did in this video, do you do side jobs . I'm in sd

[@EddieLife3500]

thanks man really appreciate it yes i do u can DM me on my instagram @duramaxking2500

[@drewk5929]

How about a 2007 LBZ duramax? Lol Good video

[@mv.m5438]

Did you delete the DEF?

[@EddieLife3500]

yes

[@christophermartinez431]

Could you send me the link to what he bought? I have a gdp with ezlynk. I’m looking to go into ppei

[@EddieLife3500]

just call ppei they can get u everything

[@shayj.603]

That's a nice truck but who ran the wiring for the bumper lights? We all know the wires should be woven into the rim of the spare so they don't hang hahajk

[@EddieLife3500]

i think the customer did

[@shayj.603]

I was just messing around. I know I've done a couple of things to a vehicle that would probably make people laugh lol I'm not sure how I ended up watching your videos but you have a pretty cool channel. You have a new subscriber

[@EddieLife3500]

Thanks man really appreciate it

[@patrickguffey1967]

Can you please do a video on the 6.7 Ford powerstroke delete

[@EddieLife3500]

i just did it will b uploaded tomorrow

[@osideintegra]

Nice what does something like that cost? I have the same truck

[@EddieLife3500]

for everything that this guy did its about 3K

[@charleshenson4183]

To much,he could have done it for half this & got just as much power

[@charleshenson4183]

All you need is a good tuner & tune $1,500 & a section of 4" pipe $100

[@robcarrick3534]

Did the exhaust fit good? Seen ppl have had trouble around the air bags

[@EddieLife3500]

it was kinda a pain but yes it fit good u just have to adjust it perfect

[@bigl0892]

Stupid question I'm sure, but when you delete these trucks do you have to but all the old stuff back on when you go in for emmissions testing, and if so how much of a pain is that to do?

[@EddieLife3500]

if your in a state that needs emissions testing then yes but these trucks r not registered in California

[@shearerperformance4016]

Awesome video Eddie I run EFI live on my Cummins and I have the csp5 switch to is there a big difference between that tuning and mine?

[@EddieLife3500]

its depends on whos tunes they are

[@shearerperformance4016]

LML Eddie I had mine internet tuned like 20+ times with what I'm running and I am around 800+ hp and 1350 ftlbs of torque on a Dyno day

[@EddieLife3500]

i have ppei do all of my tuning

[@preacher031163]

i am about to do this but i have a question on my 2014 ram 3500,the service def screen is active.....can i still do the tunes without fixing the def system

[@EddieLife3500]

yes

[@christophermartinez431]

What are your tunes? What is your rampage tune at 200 or 130??

[@EddieLife3500]

PPEI and i have a DSP5 switch max it goes to is 200

[@slimshady8249]

Csp5 switch. The dsp is for a duramax set up

[@KombustionKingdom]

VGT turbo off at idle?

[@vikingbrothersgarage2640]

how hard was it to put the 5'' on with factory air suspension?

[@EddieLife3500]

Not hard at all

[@vikingbrothersgarage2640]

@@EddieLife3500 everyone says there is clearance issues between the bag and the exhaust did you experience this?

[@steveadams8977]

Hey Eddie love the channel bro. I just thought a 2018 mega cab dually. What's a estimate on price parts and labor if I was to go threw you? On this exact set up? Thanks in advance

[@EddieLife3500]

DM me on instagram @duramaxking2500

[@steveadams8977]

@@EddieLife3500 for sure I'll hit you up later on today 👊

[@karsonrinehart4279]

That's a Ram logo, ram separated from dodge in like 2010. anything newer than 2010 is just a ram

[@uncletater1097]

Karson Rinehart it’s all still the same company, they didn’t separate. Ram is focusing solely on trucks

[@h001139]

Where can i go to get this setup installed? Is there a shop in NC?

[@EddieLife3500]

not sure man

[@h001139]

Eddie's Life could you tell me how long did it take you to install all these parts? Any special tools you needed to install these parts? Could you link to where you got these parts please?

[@EddieLife3500]

no special tools needed and call willie at synthetic motorsports tell him eddie sent u

[@charleshenson4183]

Should have got a radiused led light bar so it doesn't look so cheesy.

[@marcop760]

What type of tune can a I do on a l5p

[@EddieLife3500]

marcop760 there r no tunes for a L5P yet

[@ryan-xj4hr]

What are the emissions implications?

[@neilo.hislop950]

Those of us who do these installations DON'T REALLY CARE.

[@KillDudeHD]

Do you know anyone in Texas that does this kinda stuff that you trust?

[@EddieLife3500]

no sorry

[@bradybaxter4610]

Do you know the average hwy mpg of a PPEI tuned/deleted Cummins?

[@EddieLife3500]

no sir

[@Fuck_lames]

Brady Baxter I’ve heard 22-24 mpg straight pipe and tune

[@tsimmons1974ts]

Nice viper !!!

[@jonyboy3543]

It was changed to ram in 2018

[@alansousa2488]

what is the difference for PPEI EFILive ?

[@EddieLife3500]

call logan at PPEI he will give you all the info on that

[@alansousa2488]

thanks eddie's, last question you installed the brake system in 5 "exhaust or kept the original?

[@EddieLife3500]

i have a 5 inch straight all the way back

[@Fitter4life]

looks like dodge to me (looking at the symbol of a ram animal lol.....)

[@eliakimseleguim2716]

Onde compro esse kit de escapamento?

[@TheGuyWhoHacks2]

Does it work with the 18's? I see 13-17 on websites

[@EddieLife3500]

yes they just released the tune for the 18s

[@wyoming3075]

Just got an 18. Where can I get one ?

[@allptotx]

i thought EPA shutdown tuner makers. also this modification is illegal

[@EddieLife3500]

they try but have no success

[@aldotorres6627]

What setting does he drive on

[@EddieLife3500]

i believe 2

[@DespairMisery]

How do you make it roll coal?

[@EddieLife3500]

just pull the petal to the metal

[@andersoncaveira6327]

08:19 que sincronia

[@EddieLife3500]

estoy de acuerdo

[@sticrzy123]

Easy on the throttle gotta give it time to relearn Transmission or you’ll be putting in new Clutch Plates

[@20Prosperity12]

3Gunner 30% throttle for 30 miles. No highway.

[@ericestep9880]

Dpf back kit lol

[@juanaraguz2382]

Love dodge..always

[@johnbsk]

8:02 What beer is that?

[@EddieLife3500]

no idea man i dont drink haha that was my buddys

[@samuelbridge7873]

Eddie's Life hey I know most your videos are of diesels, but I have a question for you. I have 2015 2500hd with 6.0 gas. I love the look of the 5" Flo pro exhaust on this ram. Would it be possible to use the Flo pro kit for the duramax on my truck? Are the exhaust hangers in the same location for gas and diesel models of gm trucks. I want the 5" alumanized steel with no tip.

[@EddieLife3500]

that i am not sure of if i had to guess probably not but i have never installed an exhaust before on a gas truck

[@samuelbridge7873]

Eddie's Life thanks for responding. If you ever come across some of the oem 20" wheels for the gm HD at a good price let me know. It would be the newer lug pattern 8x180. Thanks

[@EddieLife3500]

r u still interested in the OEM GM rims 20inch

[@imgumby6378]

Cali is cracking down on trucks registered out of state. If the owner is licensed in Montana might be okay, if Cali driver's license... They'll catch him. Just had a buddy get caught and forced to re register in Cali.

[@MrCorey214]

Cummins sound like shit imho. Duramax or powerstroke!!!!

[@thill2570]

Dodge sold their trucks to the same company that makes Fiat cars hince the stupid electric key stupid I know I have a RAM 2500hd my fob wouldn't start my truck I had to go to the dealer and buy a new battery for the key and I had to pay for a code number to reprogram my key I spent 150$ altogether

[@noahranker4133]

T Hill good for you

[@jakeschisler7525]

I wouldn't walk across the street for a new Ram or whatever they are

[@supporterofsanity]

Yeah I don’t want to cut my bumper either. Nice truck! 2017 Mega Cab Cummins myself love it!

[@lanegrey2352]

supperterofsanity but I bet your running the stock turbo and exhaust still, hurts your truck in a worse way then cutting your stock shitty ram bumper.

[@supporterofsanity]

What the hell are you talking about?

[@salvadormendez9861]

Keep up the good work but if u can u show a video of doing the delete that will help a lot thanks man

[@TimKaeb]

Nice truck, just wish it was a manual.

[@EddieLife3500]

thanks

[@screcoveryco]

Manual or Aisin...no way I’d buy a 68RFE. With the 2500, you’re stuck with the 68RFE or the G56 manual, which is dumb. Dodge needs to dump the garbage 68RFE and only offer the G56 or Aisin in all the 2500+ trucks.

[@vaccumme]

Eddie. Please stop showing the License Plates and where you live. The EPA and California will prosecute you. V.

[@EddieLife3500]

u got it brotha i was not aware

[@salvadormendez9861]

Yea man they will there’s a lot of fuck up people out there man keep the videos rolling

[@kylew8581]

Hey so I just subscribed to the channel! I was thinking about upgrading to a diesel. Which do you recommend? Dodge, Chevy/GMC, or Ford? And what does deleting and tuning do to the warranty?

[@EddieLife3500]

i would go with GMC but they r all good trucks and deleting the truck will void your warranty

[@kylew8581]

Sweet, thanks for the info. So what are some things about the Ford that you don't like? Are they just not as good for towing? Longevity? Reliability?

[@EddieLife3500]

So I picked GMC because they are independent front suspension not a straight axle like Dodge and Ford the GMC is a smoother driving truckOn the road But for off Road it is better to have a straight axle but I never go off-roading And also I love GMC have the Allison transmission. but at the end of the day they will all do the job for u

[@john91oh31]

8:02 what u came for

[@shanetroyer5359]

Your the goat.

[@7903666]

And that’s not how the j brake works lol. Good video

[@mikewhipkey6863]

Fuck them it's a Dodge it always has been and always will be!.. Well could possibly call it a Fiat..

[@duhgreat8449]

Sounds better than sex

[@EddieLife3500]

Agree

[@johnvandevusse6123]

Can you send me a link for the parts and prices on 5inch exhaust and tuner. Thank you eddy. You have a very informative channel.

[@EddieLife3500]

www.syntheticmotorsports.com/ u can find everything on here price also

[@johnvandevusse6123]

Thank you eddie i appreciate the quick response

[@EddieLife3500]

no problem

[@MrJollygreenz]

Seat Belt !!

[@juaninelmascabron2141]

Great video. Im in Texas so it's not bad. How do California residents do it with the deletes?

[@EddieLife3500]

they cant if you are registered in cali u r screwed

[@AlwaysBeSmart674]

@10:12 Yo bro what app where you using to run those readouts on your phone? Or is it something you plug into the obd port?

[@EddieLife3500]

that is the ez lynk system

[@diegosimental3586]

Good videos and for sure more dmax videos!!! Nice trucks

[@Hadgienaro]

Do you have a link or something for me to look at to maybe buy this? I have a 2014 ram 2500 that I’ve been wanting to delete and I like the whole EZ link thing.

[@EddieLife3500]

no i dont sorry man

[@gentryk7948]

When ya do go for hpp or calibrated addiction tunes for a cummins....

[@lordnetsplits3192]

very nice

[@darrickdykstra5579]

This got rid of the DEF fluid too

[@EddieLife3500]

yes

[@mikeboxler759]

could you just delete the exhaust def system without changing the exhaust?

[@codykochan-erdman9620]

Mike Boxler you can get a def/dpf delete and they will just remove the systems and put and a piece of straight pipe instead of the whole thing being changed

[@gslife1]

Sounded like a beast

[@shawnbutell8973]

Fiat bought part of the Dodge company and so they made Ram trucks separate from dodge from 2009 when they introduced the 4th gen. And the cars are dodge now.

[@JeffRigney]

Not a good install video. Doesn’t show anything being installed. Just a lot of hot air!

[@2slowt67]

Has the 2016 Ram been lifted or leveled yet?

[@EddieLife3500]

nothing yet he is looking into lift kits right know

[@thehustlelife481]

Do you find that you have to dent the down pipe on the 5in to keep from rattling on the frame?

[@wva_trucks2336]

Great video great truck but it’s actually a vgt turbo

[@kimday0390]

I’ll buy the old running boards

[@EddieLife3500]

i will let him know

[@glmcbryde]

What all do I need to straight pipe my 2018 RAM? I already grabbed a 5" Straight pipe from FloPro, and I know I need a tuner. I am looking at easy link with PPEI and a DSP5 Switch. What else do I need to get the truck running again? Thanks!

[@EddieLife3500]

thats it man

[@creativedestructionmobileg1172]

It’s a diesel truck that is why it is called a ram

[@bridger911]

Can you get to the actual install already. Thanks.

[@arielgomez842]

I will buy the rims

[@chaseashley2779]

Can you do this exact setup on a 3500

[@EddieLife3500]

yes

[@chaseashley2779]

How could I get a hold of you to do it because I’ve been looking to get it deleted for a while now

[@EddieLife3500]

if u have an instagram DM me @duramaxking2500

[@charlied2449]

Eddie is it true that the new programmers allow you shut the egr system down but leave them on?

[@EddieLife3500]

depending on what kind of truck u have its different for all makes and models

[@jonathanjuarez6413]

How much should I be spending if I deleted my 2015 2500 g56 any ideas?

[@EddieLife3500]

if your in cali anywhere between 3k to 3500

[@robcarrick3534]

Yea I know flow pro says it won’t fit but I’ve heard of ppl “making it fit” usually putting a dent in the pipe at the air bag

[@EddieLife3500]

i did not have to dent anything just pay attention thats about it haha

[@robcarrick3534]

I figured it would fit idk why they did that

[@mrbear1311]

Is it still the best one???

[@EddieLife3500]

Yes

[@mrbear1311]

@@EddieLife3500 where can i get one for my 2015 ram 2500.... Can i get a link

[@EddieLife3500]

U have to DM @rajkalkat on Instagram

[@kdthesinger8286]

Hellcat

[@joemeier659]

did you remove the def tank too or just siphoned the DEF fluid out?

[@EddieLife3500]

just drained the def tank

[@joemeier659]

@@EddieLife3500 ok. i plan on delteting my next truck

[@MrLavallet]

Nice wire job on the lights in the rear

[@EddieLife3500]

i did not wire anything on this truck

[@scottkailey1]

Wont they throw you in jail for doing something like that in Cali???

[@EddieLife3500]

to b honest with u i have no idea man

[@stopchangingmynameyoutube]

scott k you would get a hefty fine in any state, this truck is now illegal to drive on public roads a per epa emissions standards

[@callofdutyguy9]

Aren't these mods illegal?

[@EddieLife3500]

for offroad use only no they r not