You're the best out there, not only working even on the street/parking but at the same time filming, providing such high-quality and detailed videos it is indeed astonishing. Congratulations on this skill you have. Great achievement, it is one of a kind never met nor seen by someone else.
@WMCS3 жыл бұрын
Thanks for the support.., very much appreciated
@sinanmehmet20383 жыл бұрын
Great job as usual! Like how you leave subframes in the vehicles and work around them, Great time saver and it supports the gearbox too. I had to replace the timing chain on a 1.6 diesel Mokka a few weeks ago, what a job, subframe out gearbox out and then strip half the engine down as its on the rear of the engine! Fair play again for doing that on the floor 👏
@Wayne-Jones3 жыл бұрын
Dual mass flywheels, what a racket. Nice job, good to see some people still got the enthusiasm to do this type of work
@justintasht10673 жыл бұрын
This was a nice Sunday morning treat😀such skills and a proper hard grafter full respect 👍👍
@st_apgr50813 жыл бұрын
I am really jealous how calm is this guy and he is working nice , clean and with order.Great man,i wish u good health and to prosper sir.
@cmac51103 жыл бұрын
You are the only person I know who makes clutches look easy keep up the good work mate 👍
@clint13883 жыл бұрын
Hi Kevin my wife found this youtube channel of you and she said Kevin does the same work I do she showed me the youtube video I really like your videos . I am also Mobile mechanic in Australia .thanks Kevin -Albert
@WMCS3 жыл бұрын
Hey Clint. Always great to hear from a fellow mobile mechanic.., thanks for reaching out. Do you do general repairs or specialise.
@clint13883 жыл бұрын
@@WMCS I also do transmission and cylinder head jobs my wife work's with me she helps me pull Gearbox and All repairs we work together
@samchinyani7033 жыл бұрын
Thank you very much with this video I managed to change my clutch and flywheel following your guidance really appreciate that. A real hero
@WMCS3 жыл бұрын
Thanks for the feedback Sam
@gregwms88863 жыл бұрын
This looks like the hardest one I've seen you do so far.
@NeoHack3 жыл бұрын
The mini cooper R53 is the hardest
@johngault36933 жыл бұрын
I agree sunday treat ... Kevin hope ur keeping well chum 👍🙂
@TheSquib1002 жыл бұрын
Quality mate, so fast with super fast tools , I’m just getting my Mokka done so picked up a few tips . Well done fellow 👍
@tanveerkhan92213 жыл бұрын
Car surgeon at his best again this guy's a legend
@craigtrigg42883 жыл бұрын
my clutch judders when pulling off on my Vauxhall astra 2.0 cdti is this common problem on this car , great video
@swms96793 жыл бұрын
Kinda figured you'd upload a full video of the Mokka since there was a lack of footage of it in the behind the scenes haha great job as always 👍🏻
@markt54263 жыл бұрын
Hi Kevin, Well done mate another one completed with precision. Mind you, if the person who design it had to work on it, they would make it more accessible for replacing the clutch. Well done Kevin. 👍👍
@WMCS3 жыл бұрын
That’s it Mark. It’ll be nice to see one of them engineers one day.
@andrewowens41243 жыл бұрын
Top guy this! Knowledgeable and a real grafter.
@WMCS3 жыл бұрын
Thanks Andrew. Really appreciate the feedback
@camillomotor6 ай бұрын
Ciao ottimo lavoro. Quanto abbassi il telaio ti molli anche la scatola dello sterzo? Perché dal video non si vede.
@stephengreen63383 жыл бұрын
bloody hell Kev, whatever your charging for a Mokka...........double it, what a nightmare, having to take off, and put back all those auxiliary's, before you get to the job....respect
@oscarmontero57243 жыл бұрын
Good work! A big machine with a relatively small engine. At least quite easy for you! Thanks for the video!
@bensnare11813 жыл бұрын
Cracking video as always kev, was wondering do you do any additional work if the customer asks for example change the front brakes or quick service???
@jasperj46073 жыл бұрын
Brilliant work. Is that a 1/4 milwaukee long reach ratchet. Many thanks
@rizla7708 Жыл бұрын
Does a 2016 Vauxhall Mokka 1.6 CDTi Exclusiv need its timing chain replaced regular intervals ? Awesome video. When someone like you does a hard job & made it look easy you know its done by a high level skilled mechanic. To film while doing it the same time, that's another level. Fantastic job. 👍
@WMCS Жыл бұрын
Thanks for the feedback much appreciated.
@fiberkim44432 жыл бұрын
Jacking up the crossmember is okay to this car? My car is this model. I am wondering if the crossmember bent then sreering pipeline will affected. How do you think
@bobengtsson99793 жыл бұрын
Must admire this guy’s skill. He is only using high quality tools: Milwaukee and Snap-on
@lifevlogs89973 жыл бұрын
As usual, job well done! Well done Kevin!
@scottgorzkowski9013 жыл бұрын
Kevin , great work ethics. Wondering what brand of spray bottle you use to stand up to the brake cleaner. And just how thick are the mats that you use.
@andrewphilpott10203 жыл бұрын
Driveway Ninja! 🛠
@hackprine56913 жыл бұрын
I am a mechanic and I wouldn't attempt that job in a 100 years.... this guy is a prodigy...
@leminako2 жыл бұрын
That s an amazing job. Quite a lot of work compared to others. Doesn't the car loses all data with battery removed so long Running parameters? Radio code? Ect
@WMCS2 жыл бұрын
It’s all programmed in the ecu. So you’re good.
@leminako2 жыл бұрын
@@WMCS hi Kevin, So everybody trying to warn for that are trying to sell you obd memory saver stuff that you actually do not need?
@S40TBS3 жыл бұрын
Hi which is the vehicle you dread to work on?
@davidm13543 жыл бұрын
Come fai a ricordarti dove va ogni singolo bullone😅😄. Grande!
@castrolgtx50643 жыл бұрын
Hi William Fantastic video as always thanks for sharing I hope you get a Dacia duster clutch replacement soon because I’ve a 2016 one to do in the not to distant future,, I serviced one during the week and when dropping it back to the customer I noticed you can make the clutch slip if you want to.. When I got back home I looked through your videos and there was no clutch replacement on the duster...... so if the opportunity arises I would greatly appreciate the video William Tia Eric
@MrLucky666MrLucky6663 жыл бұрын
do you not test if the clutch is working properly before attaching everything?
@schinken8003 жыл бұрын
Great job and much respect for your work! Do you thighten all these screws just with the electric impact or do you tighten them by hand some more after that? You seem to have a good feeling with that machine :)
@WMCS3 жыл бұрын
That’s exactly how I do it. As the videos. But if unsure of tightness always use a torque wrench.
@ronniebarker793 жыл бұрын
Goes threw them clutches like a 16 year old joyrider lol love your work kev stay safe
@gregdelasavoie21053 жыл бұрын
Sunday morning, Sun in the Sky, a vidéo from my friend....whatelse ???
@WMCS3 жыл бұрын
Hey gregos. How are you doing. Hope the video was to your liking. Weather definitely getting better. Hope you’re keeping well amigos.
@SuperScania19743 жыл бұрын
How many hours labour was there in this and what was the reason for the clutch failure? Thanks.
@WMCS3 жыл бұрын
There’s a known issue with the pressure plate coming to light on these. The self adjuster mechanism comes apart and the symptoms are heavy clutch pedal and hard to engage/disengage gears. Repair times for me personally was 5hrs.
@SuperScania19743 жыл бұрын
@@WMCS That's exactly my issue, pedal has gone solid, just waiting for a slot in the workshop, how far from base do you go? I'm on the outskirts of Ipswich
@STREETSTANG073 жыл бұрын
Another great job. Kevin what is the average hours spent on a clutch job. I know every car is different but once your on the job just curious. Even with a lift in my shop it can still take 4 to 5 hours depending. Be safe.
@robjames2923 жыл бұрын
Nice mate. Still don't understand wye vauxhall still putting the clutch pipe on the slave 🤷
@WMCS3 жыл бұрын
A bit of a dated system. I think it’s GM design.
@robjames2923 жыл бұрын
Yeah probably right there, still just that worry of it leaking and then doing the job on a warranty claim witch is pretty my sod all lol
@andywilliams85633 жыл бұрын
Great video mate nice one. Would be really interested to know if you ever have any "oops" or "oh f**k" moments (stripped/snapped bolts, break something you shouldnt etc.)
@WMCS3 жыл бұрын
In the early days., now if I feel it’s gonna snap I work around it. I take off the whole hub sometimes if the driveshaft is seized in the spline.
@sanjaydasilva71983 жыл бұрын
Hi Kevin really good videos, great job, quick question what Camara do you use to do your recording?👍🏽
@WMCS3 жыл бұрын
It’s a GoPro mechanic.
@sanjaydasilva71983 жыл бұрын
@@WMCS thanks 👍🏽
@amokkerrichard56543 жыл бұрын
Mashallah 👍
@AlaaAlaa-uv3jr3 жыл бұрын
Thank you 🤙✌
@adriandukes76903 жыл бұрын
Great video hopefully soon you will be doing a 1.4T Petrol version
@farbraum-innenausbau3 жыл бұрын
Thanks for another great Video Kevin. 👍🏻💪🏻
@LAMECCANICA-channel3 жыл бұрын
Excellent service Kevin 💪💪💪 top 👍👍👍
@derhuszla11893 жыл бұрын
Mashallah
@sudinebabz86513 жыл бұрын
Super the clutch warrior 👍🏼
@jupiter14683 жыл бұрын
Dobra robota .
@sbk5325 Жыл бұрын
bonjour excusez moi svp. j'ai une Opel mokka 2014. et j'ai un problème d'embrayage, est ce que c'est le même cas que vous avez maintenant. merci par avance
@WMCS Жыл бұрын
Yes exactly the same. Identical
@flightofarrow3 жыл бұрын
I don’t know what you throw at Mr. Williams to challenge him , but I’m hard pressed to think of anything
@kristi76263 жыл бұрын
I love your videos. Thanks a lot man 🤝
@pinaconorth0073 жыл бұрын
Awesome how much to fit a reckon gear box " same model.
@gavh888 Жыл бұрын
excellent work
@shanebrookes18783 жыл бұрын
hey up kevin? can ask whats screwdriver for on flywheel, love ya videos fella keep it up,
@lozzaob13323 жыл бұрын
I suspect it's to lock the fly wheel when he tightens the dual mass flywheel up, as it would rotate the engine crankshaft.
@garobaghdouyan42823 жыл бұрын
Bonsoir,pourquoi les plaques noir sous les deux roues avant?
@luca_B823 жыл бұрын
nice work kevin 💪🏻💪🏻.. bad noise the mokka at the first start !! old oil?
@WMCS3 жыл бұрын
I did wonder myself. The customer did mention it before the repair.
@schinken8003 жыл бұрын
@@WMCS Its normal on these engines however it sounds horrible after 1 day standstill or more. low oil pressure on chain tensioner.
@collykeogh3 жыл бұрын
Typically how many clutches would you do in a week? Regards
@WMCS3 жыл бұрын
I used to do 10 in a a 5 day week. I’m taking it easy now. I just do 5
@collykeogh3 жыл бұрын
That’s some going . Fair play . Thanks for the reply .
@fazkhan57333 жыл бұрын
I have my Mrs mokka to do thanks for the heads up👍
@구독자-q2h3 жыл бұрын
excellent👍👍👍
@WMCS3 жыл бұрын
Thankyou.
@emmatrusdale60182 жыл бұрын
Hi from spain this week have same mokka 1,4 petrol for clutch replacement i see it same
@daveawhittle3 жыл бұрын
Very quickly got used to my 3/8 impact ratchet, bet you wouldn’t be without yours now too?
@WMCS3 жыл бұрын
It’s definitely made itself invaluable that ratchet.
@kamiondzija19863 жыл бұрын
Well done.Good jobe man.Thank you
@kamar3173 жыл бұрын
Comment tu fais pour te rappeler ou remettre les pièces démonté?
@robertosolano89083 жыл бұрын
Saludos de san Luis Potosí México magnífica herramienta y muy buen trabajo👍👍👍👍🆗
@paulbidwell67133 жыл бұрын
Great video Kevin 👌
@trickyfocus3 жыл бұрын
have you changed a clutch that you've never worked on and just winged it ?
@WMCS3 жыл бұрын
A lot of newer models. I’m doing first time. So it’s all very exciting.
@Mrizing3 жыл бұрын
I live in America. Can I come work for for you ? Please Its unbelievable how hard work you do and I would love to learn from such a expert please?
@WMCS3 жыл бұрын
That’s it mate. You’re welcome for some work experience.
@levent_akgul Жыл бұрын
you r a real master
@maxthecaddy84513 жыл бұрын
Hi kevin, on a car that young its got to be a faulty part ? Great work again my friend and top video 👍👌
@WMCS3 жыл бұрын
Hey Max. The part was faulty. As was the. Audi in the last video. Both clutch plate had about 80% left. But issue with DMF and pressure plate.
@maxthecaddy84513 жыл бұрын
@@WMCS not a fan of the DMF my self but they do play apart in keeping the gear box alive in the high torque engines
@MrDezwez3 жыл бұрын
great Video Kevin.
@jeffyoung3213 жыл бұрын
I love watching your videos and watching you work. Those Moka's look a bit of a pig to work on though.
@deniscudahy45493 жыл бұрын
Great work again my friend 👍👍👍👍
@mrgrumpy51163 жыл бұрын
No Mokka's on that .. (means bad luck) a bit of messing about but fairly easy and a daylight finish .. soon be warmer weather then you can put that heater on ebay, lol. thanks for the vid
@WMCS3 жыл бұрын
Definitely getting warmer. Ooo now now. I wouldn’t want to upset the Chinese now would I by putting it on eBay. It has to go on Alibaba mr grumpy. 😁✨
@DoODoObeiJ3 жыл бұрын
Use the force 💪🏾✌🏾
@kris-english3 жыл бұрын
Needing a clutch after only 4 years? Any idea what mileage it was on?
@WMCS3 жыл бұрын
There’s a know issue with the pressure plate mechanism it falls apart. The clutch plate itself was ok.
@kris-english3 жыл бұрын
@@WMCS Thanks. I should've known really. At least they don't have that bloody awful M32 chocolate box!!!
@SuperScania19743 жыл бұрын
Mine has just done the same on the same model of vehicle and same engine, it had only done 29k
@danielmarinmoreno58323 жыл бұрын
MASTER
@morrismawocha89983 жыл бұрын
Where are you situated
@norbertdumont1680 Жыл бұрын
Bonjour peut tu m aider mon mokka à 104 ooo kilomètres j ai un bruit de casserole quand je démarre à chaud pendant 5 seconde de plus ma pédale d embrayage se durci et après plus rien c reparti !merci de ta reponse
@WMCS Жыл бұрын
Hard to tell. Maybe the flywheel. Best get it checked at a garage.
@norbertdumont1680 Жыл бұрын
@@WMCS merci
@oneplus9813 жыл бұрын
Super :)
@TRT_WEB3 жыл бұрын
👏👏👏👏
@ΦίλιπποςΣβουρώνος3 жыл бұрын
Vauxhall Mokka + Opel Mokka + Chevrolet Trax + Buick Encore = The same car
@edneialmeida76123 жыл бұрын
Boa noite eu adorei muito serviço amigo carro
@markg6jvy1353 жыл бұрын
👍👏👏
@adamtaylor9103 жыл бұрын
Do you work Sheffield area
@WMCS3 жыл бұрын
Not sheffield no. Sorry
@WMCS3 жыл бұрын
Not sheffield no. Sorry
@adamtaylor9103 жыл бұрын
Not to worry thanks for replying
@stefandiesel92183 жыл бұрын
31:05 what a massive fly wheel!! really strange !!
@davesmith48042 жыл бұрын
Great video chap you know your $hit you, well dune
@WMCS2 жыл бұрын
Thanks mate …Liverpool 🍻🍻🍻🍻
@stephengreen63383 жыл бұрын
oh and thank goodness for bendy auto ratchets eh
@bujiasable3 жыл бұрын
hola tienes que poner un elevador que asi es incomodo y peligroso
@zagc49763 жыл бұрын
Good job wheres the slave cylinder on these?
@WMCS3 жыл бұрын
In the gearbox
@zagc49763 жыл бұрын
@@WMCS thanks Kevin I did actually watch the whole video and saw the slave cylinder, but i wondered if you can access it from outside the gearbox, my moms car broke down it wont go into gear when running but will when off, the clutch pedals very heavy, my friend recons its the slave cylinder, but is there a chance it could be the clutch master cylinder?
@zagc49763 жыл бұрын
Mokka 1.6 diesel 2015 it is
@karoln70783 жыл бұрын
How on earth are these people toasting their clutches do they keep their clutches half engaged on motorways?? 😅😅😅
@WMCS3 жыл бұрын
Karol it’s a good point. The issue are coming from the parts themselves. On this one. The DMF locked itself halfway and in turn damaged the adjuster mechanism in the pressure plate. Causing the springs to break
@drivewaydiyer65043 жыл бұрын
I’ve always felt that manufacturer’s should be more liable for failure of major components, even when out of warranty. Unless this car was wheel span everyday or has done over a 100k miles, I think it should be paid for. Rubbish parts.
@audia4addict9503 жыл бұрын
@@WMCS hello how many times for changes clutch on average ???
@bachirreggadi90923 жыл бұрын
⭐⭐⭐⭐⭐👍💐
@sertec48043 жыл бұрын
Honestly, I have caught stress watching the video. Difficult to disassemble ...