2017 Chevy Malibu P06DE ENGINE OIL PRESSURE CONTROL SOLENOID VALVE STUCK ON Part 2

THIS VIDEO ALSO INCLUDES
P06DA ENGINE OIL PRESSURE CONTROL SOLENOID VALVE CONTROL CIRCUIT
P06DB ENGINE OIL PRESSURE CONTROL SOLENOID VALVE CONTROL CIRCUIT LOW VOLTAGE
P06DC ENGINE OIL PRESSURE CONTROL SOLENOID VALVE CONTROL CIRCUIT HIGH VOLTAGE
P06DD ENGINE OIL PRESSURE CONTROL SOLENOID VALVE STUCK OFF
P06DE ENGINE OIL PRESSURE CONTROL SOLENOID VALVE STUCK ON
PIP5519 Diagnostic Tip: Low Engine Oil Pressure and DTC P06DE After Major Engine Repairs
17-NA-157 Information on Spin-On Oil Filter Replacement for Gas Engines Designed with New Oil Pump Control Systems
PF64 PF63E PF48 PF48E ACDELCO OIL FILTERS SPECS
MAXISYS MS919
+++Our Facebook Page+++
/ dallasautodiag
**Our website**
dallasautodiag...
^^^Donations are received on the link bellow^^^
www.paypal.com...

[@srick77373]

This has been so helpful. I have a 2015 Buick Regal with the same engine with this code. I have been chasing this thing down for weeks. Thank you, thank you, thank you!

[@DallasAutoDiag]

Glad that it helped

[@phoenix9041]

The 1.5 LFV has a known flaw in its original head gasket design. Mid 2022 I decided to replace it. The mechanic messed up the process, what ensued after that was nothing short of a headache. Solved all of the issues ‘except’ the P06DE. I’ve been following your videos for some time now, finally decided to pull the trigger and went in to replace the tensioner gasket today. It was in pristine condition, no nicks or damages. I also replaced the oil pump assembly with the oil pump control solenoid sensor, currently in the process of assembling everything back together. I’ll drop an update tomorrow what pressure is the vehicle holding on to. 😅

[@DallasAutoDiag]

any updates?

[@NocturnalJag]

Updates?

[@NocturnalJag]

My wife's 2018 Malibu LT 1.5 just gave her this code on the highway. It's making a ticking sound when accelerating at low rpm. It's on engine power reduce (limp mode) I took it for a short ride, coming to a stop screen said "low oil pressure turn off engine." I'll order new filter and replace oil to give update. My first impression was oil pump went bad.

[@CNSTAdventures]

@@NocturnalJagupdate?

[@NocturnalJag]

@@CNSTAdventures yes, the issue was a defective oil filter. Mobil 1 oil and filter is what I've used since I bought vehicle wife took it to a local shop and cheap filter was placed since I was out of town. Replaced defective filter with Mobil 1 (#M1-113A) filter did an oil change ran vehicle problem solved! Cars currently at 256,xxx miles going strong. Apologies for late response. Cheers!

[@101ful]

I have Opel Insignia 2016 2.0 diesel with the same problem. Still chasing it. Replaced solenoid valve and oil with filter so far. This started right after cam chain break (luckily no damage to camsafts, valves and so on). My mechanic has replaced cam chain with tensioner and this error code has appeared. Have no clue what's happening. There are no gaskets in cam chain tensioner that could be potentially be misplaced. So may be it's high pressure oil leak in new tensioner or it was installed inapropriately. Thanks for the video

[@DallasAutoDiag]

No problem

[@crawford8959]

Did u figure this out? I've got same issue. Need to get it fixed. Can't keep clearing the codes to get it out of reduced engine power.

[@LCARSADV]

I guess I missed it, what was the conclusion or what fixed it?

[@ezracarrizales23]

The tensioner gasket from timing was faulty

[@DallasAutoDiag]

Tensioner gasket

[@ezracarrizales23]

So was the gasket put on backwards or was it damaged

[@DallasAutoDiag]

damaged. end of this video has pictures sent from customer

[@chuckbehm]

I have a 2018 Equinox 1.5L Turob I cant even find the oil pressure sensor hard to locate. No information on the P06DE error. I just put new oil in it and drove it for 1 day the error came back. I have a Innova 3170RS scanner but cant find where to watch the oil pressor on it and the equinox has no oil pressor display for some reason.

[@DallasAutoDiag]

it looks like its above the starter motor

[@ezracarrizales23]

You think this applies for high oil pressure and the solenoid being stuck of

[@DallasAutoDiag]

I don't think so

[@jcunn76]

I’m having this issue with my 2018 Malibu. Oil pressure is good at idle and while driving. But code comes on a reduced power and drives fine. I’m confused on what’s going on.

[@DallasAutoDiag]

did you watch both parts of this video?

[@JayPoster490]

Did you ever get it fixed? Mines a 2016 and same issue. He said it was a damaged tensioner gasket. Was it for you?

[@shawnmc964]

@@JayPoster490did you get yours fixed?

[@JayPoster490]

@@shawnmc964 yes. Turns out it was oil pump solenoid. Replaced it and along with that came a new oil pan plus oil change. Problem went away.

[@shawnmc964]

@@JayPoster490 did you only have the p068 code?

[@bear1983211]

I have the same code on 2017 Chevrolet volt but also my infotainment screen is black. The backup camera works. Blinker works but does not make the sound. This seems like an electrical issue to me. Do you think it's related to the fuse you mentioned in the first video?

[@DallasAutoDiag]

I won't be able to tell without a diagram. sorry

[@bo24kt]

Hey they said my Malibu have the same codes but I’m lost on what parts I should buy

[@DallasAutoDiag]

Did you watch part 1 and part 2?

[@bo24kt]

I bought the oil pressure switch is that right part can I get your number

[@bettykeck6448]

I don't have anybody I can trust to fix this on my car sound like the same thing that's going on my carpet. I've never had the old pan dropped but is there any way you can help me?

[@DallasAutoDiag]

Where do you live?

[@bettykeck6448]

@@DallasAutoDiag crane tx

[@adityapidikiti3216]

I recently did a major engine repair with error code P1101 ( replaced pcv orifice) after the fix I’m seeing error code P06DE mechanic was suggesting me to replace oil pump first, and then possibly engine. Any suggestions, Did my mechanic haven’t installed the tensioner gasket properly which is causing the error code P06DE

[@DallasAutoDiag]

Could be

[@elvispena1098]

What was the solution to code p06de?

[@karajohnson6588]

So mine gets stuck in gear when attempting to floor the gas the rpm’s go up but you have to let off the gas for it to shift what could that be ?

[@24BlackMamba8]

That's what I'm getting right now. I changed the 02 sensor since it said that was bad. But it's still happening. I'm getting both catalytic converters changed this weekend. 😒

[@karajohnson6588]

@@24BlackMamba8 lmk how that goes ! Ian even wanna take it to the Chevy dealership cause that shit be tryna charge too much for simple ass shit

[@24BlackMamba8]

@@karajohnson6588 yeah if it is the catalytic converter is going to be expensive AF anywhere you go unfortunately.

[@karajohnson6588]

@@24BlackMamba8 damn so did you replace them ?

[@karajohnson6588]

@@24BlackMamba8 did you ever have a code po6DE pop up ?

[@prashanshan7125]

Good investigation..!

[@DallasAutoDiag]

Thanks

[@advancedleveldiagnostics]

Very cool!

[@GEO3535]

Awsome video! Very helpful

[@DallasAutoDiag]

Thanks

[@rohanboswell5408]

Did your issue go away ,I think it's the oil pressure solenoid

[@DallasAutoDiag]

Yes never came back

[@rohanboswell5408]

@@DallasAutoDiag so it was code p06DE and salutations was oil pressure solenoid

[@DallasAutoDiag]

@@rohanboswell5408 did you watch both videos?

[@rohanboswell5408]

@@DallasAutoDiag no didn't have time ,I found out the customer had no oil in the car ,he was trying to blame me , because I have changed the brake vacuum pump 4 days before ,,

[@DallasAutoDiag]

@@rohanboswell5408 I don't think this is related

[@alejandroespinoza3686]

Very thorough. A master of his craft.

[@DallasAutoDiag]

Thanks

[@mohmmdm321]

معلم واستاذ

[@DallasAutoDiag]

شكرا

[@andrewchandler5096]

Nice video

[@prabuscross1.663]

Sir have you tried fixing car paking senor(clean parking sensor),always keep on beeping on the dashboard

[@DallasAutoDiag]

Did you try to replace the sensor?

[@prabuscross1.663]

@@DallasAutoDiag yes sir i did replace,however initially the fault was rear center left (RCL),after changing the RCL sensor, now it is showing RCR,I have ordered another sensor, it should reach in a day or two,ill update you sir

[@aleksandrzinkevics1253]

Top man

[@DallasAutoDiag]

Thanks

[@alrifainidal]

well done .

[@DallasAutoDiag]

Thanks

[@user-cz4kt9vx2k]

You didnt show actually taking the solenoid off. -_-

[@DallasAutoDiag]

I'm not a mechanic. I'm a diagnostician

[@bo24kt]

Part 1 where you showing where porcini seen both parts

[@haleyterry293]

What is the name of the part?

[@DallasAutoDiag]

glad it helped

[@romeroslavings8054]

Where is the oil pump control valve

[@karajohnson6588]

You have to pull the oil pan down and oil pump down it’s inside the oil pain with the pump