2017 Chrysler 300s 5.7 Tuned 0 to 60

[@8speedhellcat889]

Nice run!!

[@ceramicgrey300s9]

Thanks man👍

[@Matt-uy4zk]

Wow nice time! Hard to get that in my 392 with the crappy all seasons.

[@ceramicgrey300s9]

Thanks man. Hoping to get into the low 4s with some headers.

[@Matt-uy4zk]

@@ceramicgrey300s9 would love to see some more videos after headers of your progress! Have always loved the 300s and the 5.7 is definitely an untapped powerhouse from the factory.

[@mariofernandez6930]

Cars quick💪, I barely bought a stock 2016 chrysler 300c platinum with the Hemi, what kind of tuner do you have and what else have you done? I'm wanting to do some mods since I'm bone stock other than appearance

[@ceramicgrey300s9]

Thanks man! I actually broke into the 12s in my most recent video. All I have performance wise is a hemifever engine and trans tune, exhaust, and a 180 thermostat. The tuner is by Diablo, it’s the Diablo i3 and I ordered that with a PCM swap for 512$

[@mariofernandez6930]

@@ceramicgrey300s9appreciate it gonna look into doing the same... and I dont know to much about cars but was it 512$ for the whole setup?just peeped that 12 second video😳👀 things a beast... I'm subscribed so ill be looking forward to your videos💪

[@ceramicgrey300s9]

@@mariofernandez6930 yes the Diablo i3 and the PCM swap. You have to give Diablo your old PCM and they will send you an unlocked one. The Hemifever tune is 275$ extra but the Diablo tune that comes with was just fine for me. I got a custom tune because I’m adding longtube and some other stuff.

[@jeffveal1185]

Wow!!! Nice run brother!! What kind of headers are you getting? I have a 17 300S 5.7 with a mopar CAI, mopar 3.09 LSD, 180 t-stat, Magnaflow mufflers and high flow resonators. I ordered Kooks short tube headers ( I didn’t go long tube because I’m lowered and I was worried about rubbing) I’m also going to get a custom Dyno tune when the headers are installed. Not sure if I will be as quick as you though. Lol Did you notice a nice jump in power with the Diablo tune?

[@ceramicgrey300s9]

Thanks man! I plan on ordering some JBA 1 7/8 with their catless midpipes. I am also lowered, but only 1.25-1.5 inches so scraping the longtubes shouldn’t be an issue. I did notice a big difference with the Diablo tune. I’ve gotten all of my times down about .5-.8 seconds except for the 8th mile. Couldn’t get good times thought until I got some new tires, which hook really well.

[@just_a5.7]

Jeff Veal what's ur 0 to 60??

[@ceramicgrey300s9]

@@just_a5.7 best is. 4.4 with the tune, 4.6 consistently.

[@just_a5.7]

@@ceramicgrey300s9 do you think my 2019 charger will react the same to the mods like ur 300

[@ceramicgrey300s9]

@@just_a5.7 if it’s a 5.7 yes

[@kevinjuarez6658]

Why are the 5.7 so underlooked i see the v4 and twin tubro Infiniti say they can beat hemis all day I think they stupid tho I have a 5.7 Daytona 18

[@ceramicgrey300s9]

I think stock they are under tuned from the factory as well as being underrated too. A few mods will really wake these motors up. Most people run into stock or lightly modded ones and say they are slow.

[@kevinjuarez6658]

@@ceramicgrey300s9 yeah I raced a 3.0t infinity and he lost bad I honestly belive dodge should put better tires on the rt and scatpacks out of factory

[@ceramicgrey300s9]

@@kevinjuarez6658 oh yeah even the hellcats don’t have wide enough tires unless it’s a wide body

[@kobiansah9653]

How do u launch it😅

[@ceramicgrey300s9]

Brake torque @ 1500-2000 rpm’s then let it rip

[@TestAndTune]

Whats your 0 to 60 when it's 80 out?

[@ceramicgrey300s9]

4.6-4.8 on average.