2017 Ducati Monster 1200 Mods

[@giovannisalvador759]

Nice video, nice bike. Quick question, which TechSpec tank grip pad is that? Can't find it anywhere. Cheers.

[@onlyfoolriding8223]

Love how you drew the line at the mirrors, which you actually have to use, after you probably dropped 2500 on aftermaket stuff. haha.

[@vc3599]

Ducatopia Yeah :). Can’t justify $150 per mirror by Rizoma. If I drop the bike, the mirrors and bar ends would take the brunt of the damages.

[@davidspin5353]

@@vc3599 Brah I think he was being sarcastic!

[@samihasib]

Beautiful Bike. With the Ducati Quick Shifter (DQS) 1. Is the DQS just plug and play or does it require wiring? 2. Once installed - does it have the option form the front dash (display) to turn the DQS On/Off/ or Select Up or Down or Both U/D like the 1200S ? 3. When DQS is active - does is show DQS on the display? (Top left corner) Thank you

[@vc3599]

H Sam it’s pre- wired, but installed and turned on by the dealer. $95. Cannot turn off once it’s on, up and down. DQS is always displayed on top left. I think it can be turned off only by the dealer or Ducati mechanic.

[@leandrocintrao67]

Is this ducati quick shifter available for other models? Sounds awesome, I saw a 1200r yesterday sounded so much louder than my 939 hyper it's a different sound more loud and more aggressive, loved it!

[@vc3599]

Leandro Oliveira It'll work with the Panigale as well. It's plug and play with the new monster. Meaning, it's already pre-wired and and software installed on the ECU.

[@SmokysRides]

Hi. I'm considering the Rizoma drag bar upgrade for my '21 1200S. Looking back on these mods after all this time, would you do the bar again? Any regrets?

[@vc3599]

No regrets. Would 100% do it again.

[@EP-336]

How’s the heat on your legs? I live in the southeast and it’s 100 degrees during the day in summer. Trying to imagine sitting at a stoplight with the header 2 inches from my leg.

[@vc3599]

It gets pretty hot if your at a stop light. In heavy traffic and at a light, sometimes in turn off the engine while waiting.

[@diyducati8252]

How do you like the dragbar, I have the rizoma ma008 and it's made the bike super comfortable but I feel like it's harder to dip it into turns. I'm 6'3 and wondering if the dragbar would be more comfortable. Also is it much wider than stock, wanna still be able to lane splitting.

[@vc3599]

I love it. It gives me a more aggressive stance without putting any weight on my wrist or straining my back. It's an inch narrower than the stock bars, so no issues with lane splitting.

[@diyducati8252]

Wolf359 nice, how tall are you if I may ask? Worried about back hurting.

[@vc3599]

DIY Ducati not tall. 5'8".

[@mcluhanmedia1223]

What about the moded wheels? Those definitely do not look stock.

[@lorenzomagazzeni5425]

My God, It's alive !

[@SpankYa]

Does the new exhaust obstruct your right heel? I know Ducati redesigned the stock exhaust to address this long standing problem.

[@vc3599]

The Competition Werkes exhaust does not obstruct the right heel. I wear a size 9 boot and still have plenty of clearance. The 2017 Monster's pillion peg is now separate from the exhaust bracket.

[@khema6085]

Ay bro, where did you get your swing arm sliders I have the same bike stand that I used to have on my 821 but I own a 1200.

[@vc3599]

Khem A Trex Racing

[@RowdyMornings]

Love the bike! Any problems since you bought the bike?

[@vc3599]

Leo R The front wheel speed sensor needed to be replaced. Under warranty.

[@ManuelSantos-yv1ic]

Beautiful, amazing. You had to reschedule the ECU Bike, because of Werkes Exhaust?

[@vc3599]

Manuel Santos No re flash of the ECU required. Competition Werkes goes well with the Monster 1200 & 821.

[@monsterrider5220]

Thanks, The consumption increased a lot with this exhaust?

[@vc3599]

Monster Rider I can't tell. Installed the exhaust the day I got her. Getting around 39 MPG.

[@ManuelSantos-yv1ic]

Wolf359 thanks mate

[@Aldo08F]

I couldn't see if it had been asked before but what the gizmo on your left side grip, looks like it might be a disc lock???

[@vc3599]

Aldo 75 it’s a Bluetooth controller for the Sena headset.

[@Aldo08F]

@@vc3599 Cheers for letting me know.

[@ManuelSantos-yv1ic]

Hi mate, nice mods. I saw that you have a Rizoma (dragbar) handlebar. Do you use a riser adpter to instal on this handlebar? Thanks and ride safe

[@vc3599]

Manuel Santos Thanks. No risers needed for the Monster 1200. It fits the stock handlebar mount just fine. I think you need the riser for the 821.

[@ManuelSantos-yv1ic]

Wolf359 we got the same bike i guess. So you re saying that i dont need risers? If i put the stock ones it fits well ?

[@vc3599]

Manuel Santos that’s correct.

[@ManuelSantos-yv1ic]

Wolf359 thanks, the center of Rizoma handlebar its 29mm?I think original handlebar its 28mm. In the internet I found only 29mm dragbar rizoma, confirm this situation. Sorry for boring you, I Crash my bike this tuesday and really sad, but Im Ok. Now I found, handlebar, leves, and other little things. Thank you very much again

[@Tenhing_Eth]

Does the Handle bars increase the turning agility??? And those mirror are nice any link?? Thanks

[@mannyfel8324]

Thinkin bout putting these same drag bars on my 821 with the risers.. just wondering how the handling and turning and/or lean angles are affected.. Thanks

[@vc3599]

hec feliciano it’s a slightly more aggressive stance and you can feel the difference your control of the bike. It doesn’t affect handling, just your control of it. If that make sense.

[@baderalmoayed9418]

Hi I'm planning to buy the same led light for my 2018 monster 1200 s, wanted to ask if you faced error message or flickering Thanks

[@vc3599]

Bader Al Moayed no errors or flicker. The lights came with a voltage regulator.

[@baderalmoayed9418]

@@vc3599 thanks 😊

[@AlanTrades]

That start sounded bad. Is that normal?

[@sammylambert2689]

Got my comp werkes but cant figure out where the bracket attaches to the rear-set? where did yours connect to?

[@vc3599]

It doesn’t connect to the rear set. It comes with a black bracket that connects to a bolt right behind the rear brake pedal.

[@MrAliafsari]

No frame sliders? I also like to live dangerously

[@danielerossi82]

is there enough space behind the headlight for the LED? do you have the light bulb code? thank you

[@vc3599]

OPT 7 H7 for Motorcycle. There’s room but a tight fit.

[@y2.1kapocalyptic2]

Looks awesome!! Thinking of buying one, not familiar with Euro bikes. Curious & scared to know what mods are available & how they would look & ride. Yesterday I demoed Same bike S model. Quick shift up & down were my favorite part. Dealer couldn't find part # for it to add to other models (non-S). They only had S Demo bike 17' available for sale. But a few 16' standard models, & R for sale. If you have part # or link available for quick shifter please send it😎👍

[@vc3599]

Y2.1K Apocalyptic 55215481B. If you can swing it financially, go for the S model. The quickshifter and Ohlins are worth it.

[@shibamoon4190]

Very clean bike, props broda

[@oscarjettman9346]

Awesome bike! You forgot to show the rear tail lights ;)

[@ClutchNelson]

Did you drill holes in the handlebar for the controls, or...?

[@vc3599]

Destry Gleason no, not necessary. Enough friction between the handlebars and the controls.

[@ClutchNelson]

Wolf359 So did you leave the little notches on them that fit down into the stock handlebars, or did you file them off?

[@vc3599]

Destry Gleason I dremmeled them down. Took 5 seconds.

[@JoeGym69]

Great mods👌 can you give me more details on the tank grips? Techspec? Cheers 😁

[@vc3599]

Techspec.

[@Aldo08F]

Nice machine and mods.

[@mose2093]

Nice bike! What’s the thing near the light switch?

[@vc3599]

Mo Se Sena Bluetooth remote.

[@TheAlegando24]

What mirrors do you have? Thank you:)

[@vc3599]

Sgando $25 bar end mirrors from EBay.

[@Shidensen1994]

Omg why didn't you revv!? What a dragon

[@Gol_D.r31]

Wärst du so freundlich und verlinkst das Zubehör welches du Verbaut hast!? DANKE :)

[@notlisztening9821]

Ja, kommentieren wir deutsch unter nem englisch-sprachigen video. +10 iq

[@maksymsholka5889]

Cool bike Link to license plate bracket?

[@vc3599]

www.newragecycles.com/Monster_1200_R_Fender_Eliminator_Kit_p/1200r-fe.htm

[@ClutchFirst]

Nice mods man!

[@vc3599]

CLUTCH1st Thanks brother! I might do a clutch cover like yours. We'll see. It's a bit pricey.

[@ClutchFirst]

Wolf359 Hit up motovationusa and let them know you're coming from the Clutch1st channel and they will hook you up. Coupon code 'clutch1st'

[@vc3599]

CLUTCH1st Great! I bought the exhaust and all the Rizoma accessories from them.

[@charlieryan1736]

Gorgeous bike👌🏻

[@vc3599]

charlie ryan Thanks man. I couldn't ask for anything better.

[@dukedaz8920]

Nice bike nice mods m8👍

[@vc3599]

Dukedaz thanks brother.

[@MrAlfasul]

hello , fantastic bike and mods BUT AI SEE YOUR CLAMP ON TE BRAKE RESERVOIR, IS TO FAR OUT ,TINK YOU GONA PUSCH IT 1 CM OVER THE HOSE TO THE RESEVOIR, happy new year from belgium

[@arjunsunar5203]

3:17

[@lorenzomagazzeni5425]

The exahusts look like thermos - the kind people put hot coffee or tea - LOL, even termi look better.

[@AmRFuKYaH]

Comp Werks >>> Akrapovic