2017 Honda CRF450R Bike Build

[@RelentlessCo]

I like this guy , attention grabbing because he is well spoken. He also actually sounds enthusiastic rather than a droney robot

[@human1513]

ARC levers used by most pros and factory teams are lifetime warrantied against breakage. You have to be special to break one.

[@SendItWithEthan]

Always been a goal of mine to do something like this with a bike

[@robertsnyder5522]

and 30K later you got yourself a nice bike.......lol

[@ClayFick]

Robert Snyder the stocker is beautiful for under $9000

[@iceee187]

TM designworks drive set-up is a must have for any 450

[@Wide000]

These are the only advertisement videos I actually like to watch... dreams, dreams...

[@antoniomartini8495]

sick dirt bike..i also like the sound of the stock version... very unic

[@joeantolak4629]

On the 13 I’d like to try a Tokyo mods ecu with an 8000 rpm rev limit wake up that sleepy dog

[@joeantolak4629]

I hope it’s better than the 13 . Even with rs9 yoshi s didn’t have the power curve of my 08 not even close the 08 5th gear wheelies all day

[@ashtonowens4249]

we’ll see ya on the trails

[@pnwoffroader9115]

ARC levers" are lifetime warranty guaranteed, that's better than some six year

[@darinwilliams9184]

Super nice bike!! I'm out here in AZ on my 03 crf450r 💪🏼🏁💪🏼

[@hondaalldayh.a.d8877]

Darin Williams where at? Maybe we will run into each other out in the desert hahaha

[@darinwilliams9184]

HondaAllDay H.A.D I'm out in Casa Grande, what about you?

[@hondaalldayh.a.d8877]

Darin Williams I'm located in Phoenix but I ride out at wildcat near Bartlett lake and boulders near lake pleasant

[@jeremycubs8331]

Twin exhaust system is the best part of the CRF.

[@hreindustries]

I would have added triple clamps, help out a lot on high speed bumps

[@rmatvmc]

Which ones?! I was thinking of adding some but i don't know what i would get.~Chase

[@Chuckatory]

Rocky Mountain ATV MC I've always liked the Ride Engineering clamps. I put a set on my '04 CR250R 2 stroke and loved the feel of them. I haven't changed my stock clamps on my '17 CRF450R just yet but when I do it will be Ride Engineering.

[@Tanner21Miller]

I threw a set of Neken SFS's on my 2016 KTM 450 sxf, I highly recommend. The dampening is second to none.

[@rmatvmc]

ok, thanks for the advice!~Chase

[@rmatvmc]

more like X-trick because Dauuuuum those these are trick looking haha~Chase

Nice stuff

[@kylerstuart1248]

Rad bike chase! Sweet video. See you in Tooele again this year?!

[@cblair6590]

You should have added a new gas cap that would have made it look even more cool

[@rmatvmc]

We didn't have one for it yet. But we will have one available very soon from TUSK!

[@motoxwade2246]

NICE BIKE

[@jakedragsknee]

I got a 16 and want to basically want to do the same thing. Graphics, pipes, wheels, bars and levers. Maybe a triple clamp. Not sure where to get good custom graphics for cheap.

[@jakedragsknee]

Foot pegs as well. I overjumoed the back table here at milestone and sprained my ankle really bad.

[@rmatvmc]

Our attack graphics are awesome quality, look good and are a really good price. Check them out! www.rockymountainatvmc.com/t/3319/Machine-Specific-Graphics-Decals?b=20

[@coledanielson8618]

Wish I had the money to buy a brand new bike

[@Jon-wf1sn]

What track are you guys riding on there Chase?

[@jeremysmith996]

Cool dual exahust dawg! Mom I want one!!

[@JamsTomatoReviews1]

is Honda making a comeback

[@rmatvmc]

I think they've already made a comeback haha. This bike really is amazing. Compared to the 16 model which i rode plenty, this bike is a big improvement. The motor and the forks are big leaps forward.~Chase

[@JamsTomatoReviews1]

Rocky Mountain ATV MC why doesn't attack graphics make graphics for my 1997 cr250?

[@antoniomartini8495]

I can't wait to see how the Suzuki will be next year technically speaking. I see the new model at the mxgp of italy two days ago (the mxgp Suzuki team already use the 2018 version of the 450) and aesthetically speaking is just the best looking dirt bike ever.

[@rmatvmc]

I'm excited to see how it does too! Should be an awesome bike. Hopefully we can get our hands on one and see how it does~Chase

[@gasperblazek6095]

do you recomend whole body armour or just chest protector for motocross

[@rmatvmc]

That is all about rider preference. I personally wear the Fox Proframe and i've really enjoyed it. Good hard protection from roost and fits under my jersey without feeling bulky. Full body armor is nice for the abrasion protection on your arms. Really just boils down to how much protection you want. But we carry a huge selection so check them out and read rider reviews. www.rockymountainatvmc.com/t/2321/Roost-Deflectors ~Chase

[@joeynichols8233]

where can i get fmf pipes for the 2017 honda 450 i have looked everywhere.

[@romeoscallion2659]

rocky mountain or motosport

[@rmatvmc]

Joey, these were the a pre-production set that i was lucky enough to have put on. But we will have them in stock shortly.~Chase

[@joeynichols8233]

awsome thanks. I will be ready.

[@garrett3234]

joey nichols you can get some badass yoshimaru Duals that Ken Roczen and factory honda run if you didnt want to wait

[@louiepeterson2895]

rockymountaim atv

[@alhagopian2100]

i want to put a 2016 crf450r front fender my 2008 crf450r bike i seen guys do it but mine dont look right can i change the bottom tripple tree to a tripple tree that will mount to a 2016 front fender that is the same size mm fork as my 08 thank you

[@rmatvmc]

I'm not really sure. You can look at the part numbers and see if they are the same. But i doubt they are. I'm guessing those riders just had to modify their 16 fenders. Being plastic, it's easy to drill new holes if needed. I'd search some forums and see what they've done.

[@jordanlawson9974]

I would want to convert this bike to a supermoto. Would that be a good choice to do so.

[@ClayFick]

Jordan Lawson I've seen pics on insta of guys doing it already. No experience w supermotos myself, but after riding mine I would say it would be great doing anythig

[@jordanlawson9974]

This is my dream bike. Thanks for the info.

[@sadjalp2256]

Hello, I don't know anything about bikes but love Trials, Dirt Bike Races etc. How much does a bike like this consume per 100 kilometers and how many kW does it produce?

[@JamsTomatoReviews1]

Jalxppo we don't use kilowatts or kilometers, the best place for you to ask is at your local dirt bike dealership

[@colbybryan101]

How much did all of this upgrades cost all together?

[@Sejz577]

I have a question about the clutch perch on the 18, how it works with the built-in sensor for the electric start. Are there any aftermarket clutch perches?

[@human1513]

ARC levers used by most pros and factory teams are lifetime warrantied against breakage. You have to be special to break one.

[@jeremygriego6537]

I wish I had $600 to spend on a tusk impact wheel set 😭

[@icool247]

Tax RETURNS !

[@kashbrinkley4653]

i like how he said powerband. thats on 2 srtrokes not 4 strokes. othrr than that i like him

[@benparsonage9867]

Kash Brinkley 4 strokes have powerbands

[@tommyboy1986]

4 strokes have powerbands , it's just that it's spread more evenly throughout the rpm range, on 2 strokes the power band is focused in a very narrow rpm range so when you hit that rpm range the bike gets an instant burst of power like you have rockets strapped to the thing lol, this is one of the reasons I find 2 strokes more fun to ride.

[@metrobadger]

Nice bike Cuz!

[@chasecook7775]

Thanks man! haha.

[@westonbenefield7156]

sick bike

[@davidhall3028]

Where are your shock sox?

[@southwestmoto6819]

What engine oil is safe to use now that the 2017's have one sump? Is it safe to use a full synthetic from Honda?

[@rmatvmc]

There are a lot of good oils you can choose from. Honda will obviously say to use the oil and weight they recommend in your manual. I would definitely use the oil weight that is recommended but as far as brand, that is up to you. All i know is that the GN4 Pro Honda oil has 151 reviews with a 5 star rating so if you're not sure, i'd go with that.~Chase www.rockymountainatvmc.com/p/2935/11718/Pro-Honda-GN4-4-Stroke-Motor-Oil

[@louiepeterson2895]

that's all I have put in mine and its work really good

[@winterracing2818]

Can anyone tell a good place to get bike graphics? Tried attack graphics but I don't quite understand how to get there, and it is very frustrating everywhere else not quite having what I'm looking for.

[@rmatvmc]

What bike graphics are you looking for? If you go to our graphics page or enter your machine's information, you can select the Attack full custom graphics kit. After you select the colors you like, click the "customize" button to pick your name, number, trim etc. If you're unsure, don't hesitate to call us or chat online and we'll help you out. Best, ~Chase www.rockymountainatvmc.com/c/447/Graphics-and-Decals

[@winterracing2818]

Rocky Mountain ATV MC thank you so much! I look forward to buying a decal kit from you shortly

[@HeddleTown]

Nice bike cool videos guys!

[@RelentlessCo]

HeddleTowns Enduro Ride not cooler than you tho 😂

[@HeddleTown]

✊🤘👌😂

[@ads941]

Put mouses in instead of inner tubes

[@JamsTomatoReviews1]

If Attack graphics are so good, why don't they have graphics for my bike??

[@rmatvmc]

What bike are you riding?

[@JamsTomatoReviews1]

Rocky Mountain ATV MC I am riding a 1997 Honda cr250. I don't​ see my bikes year in the available options, for the bike selection part. I was looking for a complete set.

[@Motodents]

Jamison Bunch eBay

[@joeantolak4629]

Jamison Bunch cause your bike is a dinosaur and seriously those graphics aren’t that sick . You don’t need that

[@999racing]

is it Electric start?

[@jaxonslocum8948]

No. Race bikes don`t have electric start for weight reduction I think.

[@999racing]

Ah okay

[@rmatvmc]

No. The electric start is an option to be added onto the bike later though.

[@999racing]

Oh okay. Does it have a battery?

[@rmatvmc]

Nope, you have to buy the whole starter kit. My opinion, Honda should've just included it rather than making it optional. More people would want it that not. My self included~Chase

[@codylewis2843]

i have a question..... what did all of this cost?

[@zshredclh10]

Considering the suspension was about 1200 alone, plus 600 for the wheel set, everything together was probably about 3000.

[@avoidthedog]

used to love Rockymountain. until I ordered an fmf exhaust from them and they sent me an old version and refused to recognize there was a new version despite me emailing photos and other evidence. some of the worst customer service I've delt with. if you want the latest parts ide shop somewhere else

[@hiphoppin9]

What bike was it for and what kind of fmf pipe?

[@ethanmccabe2714]

Yo

[@deadeyenic6833]

Do a build with a kawasaki

[@andrewmullins5169]

White version of Drake.

[@jamesyboye9254]

me want😂

[@jeremysmith996]

Dual exhaust is a joke. You cant bullshit a bullshitter honda!!!

[@Dero_milsurp]

Definitely a gimmick

[@slon9120]

kinda pointless with twin exhausts on a single cylinder bike. just adds weight and tuning complication if you decide to change it

[@tomheathergawel9310]

Disappointing video...just an ad.

[@NCER999]

Totally. First "must have" a set of levers? Most stuff mentioned is just bling.

[@robertterrell6352]

Asv's are the way to go.

[@joshuawatts51]

First thing I buy is levers because I trail ride and absolutely love to wreak.

[@NCER999]

If you ride enduro, buy a good set of wrap around handguards instead. I've never brought levers, stock do the job and never broken them with as I have "barkbusters".

[@joeantolak4629]

On the 13 I’d like to try a Tokyo mods ecu with an 8000 rpm rev limit wake up that sleepy dog