2017 Mercedes Benz GLE 350 4MATIC - How to reset maintenance service minder after oil change

2017 Mercedes Benz GLE 350 4MATIC - How to reset maintenance service minder after oil change.

[@nelsonheavyd8551]

You are a perfect teacher. Thank you very much

[@emmapilex]

You are welcome.Glad i could help

[@kman5924]

Thanks from Texas. The guy at the Mercedes shop told me we'd have to pay to get this done.

[@gaborharis3143]

Very well done video. Thank you!

[@MaximumDIYGarage]

Excellent explanation! Thank you very much for sharing these steps! You calm demeanor is very much appreciated!

[@emmapilex]

You are welcome. Thanks for the kind words

[@user-cx5qz1rm2m]

Good job

[@akrikaakrika1474]

Very well done, without any drama. Thanks.

[@emmapilex]

Thanks for the kind words. Appreciated

[@edwardabrantes2520]

That was great news and thank

[@mikeyescaladeatoceancadill3638]

Great information sir thank you

[@emmapilex]

You are welcome sir

[@calitosanto4343]

Awesome video

[@charger736912]

Is great your test and explanation.👍

[@sergiovildosola1768]

thank you. you explained xactly how it needed to be done.

[@emmapilex]

You are welcome

[@HiepNguyen-ye6je]

Thank you! Very helpful instructional clip.

[@emmapilex]

You are welcome

[@drewsilva2041]

Helpful but damn dude 4mins to get to the reset…time is money my guy

[@emmapilex]

You are right bro, my audience aren't all techies, but sure will look into improving on duration

[@richardchen8511]

It works, thanks for sharing!

[@emmapilex]

You are welcome. Glad i could help

[@johnshell2480]

Thanks man! Worked like a charm! Your good😊

[@emmapilex]

Thanks for the kind words. Appreciated.

[@howardkwellerm.d.510]

thanks for your help! it worked !

[@emmapilex]

Glad i could help

[@ShaneStallions_TV]

Thanks for the info... great job.

[@emmapilex]

Glad i could help. Thanks for the kind words.

[@frank1672]

Good man very clear.

[@emmapilex]

Glad i could help. Thanks for the kind words.

[@microtechTeslaY]

Great video. Thanks.

[@emmapilex]

You are welcome

[@michael931]

This is the only video showing how to do it with the push button start. I'm going to try this tomorrow.

[@emmapilex]

Hey, Glad I could help. Tried it yet? Did it work for you?

[@AdewaleShefuwa-dh8nk]

Po700

[@NF2222]

Very helpful..And Mercedes in UK charging about £650 for service 1 thank you

[@emmapilex]

Oh wow! Glad i could help. Best of luck

[@microtechTeslaY]

Rip off

[@yeseniapacheco1164]

Thank you!

[@emmapilex]

You are welcome

[@yihwayen2444]

Thank you! 👍

[@emmapilex]

You are welcome

[@ljavery10]

Goat

[@kallejohnson1225]

Thanks!

[@emmapilex]

You are welcome

[@SergioGonzalez-nb4ju]

Thanks

[@jamesd2289]

Thank u

[@emmapilex]

Glad i could help

[@JoseGarcia-qo6yb]

thanks

[@docenteivanalfonsocorderog7069]

Hi thanks for the tip. What the means of the C signal right to the R in the panel?

[@emmapilex]

It indicates the drive mode. C means Comfort Drive mode is selected. Sorry for the delayed response

[@ivanalfonsocorderogutierre7498]

Thanks!

[@garthwalters1968]

Thanks for your help although you gave too much information didn't have to be that long of a video

[@fabulousmag4723]

Hello Emma, i have lexus Rx 350 2013 and is showing Check AWD and Trac off at the same time. I will like to have your contact or handle so we can talk about it

[@emmapilex]

Sorry for the really late turnaround. All good now? If not you can drop a couple of lines here.

[@toningtony8411]

Why does mine say full service could not be carried out?

[@emmapilex]

Not sure. I hope you got it sorted out. If not, I would recommend you run a diagnostic scan and clear all fault codes, then try doing the full service reset again. If that does not work, then it could be that the service memory may be full. In this case, you will need to manually enter a low figure or even Zero for the days after service and km after service in the appropriate menu in Star diagnosis Assyst Plus. This cannot be done from the instrument cluster. Sorry for the late turnaround.

[@eoghanmccarthy3014]

15 second procedure.. How did you get 6 minutes of noise out of it!

[@jamesptanner]

😎

[@popcrine9300]

what is this for?

[@MaximumDIYGarage]

the title of the video explains what it is for

[@kman5924]

I thanked you too soon. It didn't work. It kept telling me about clearing the odometer. Dam I thought it would work

[@emmapilex]

Lol. It's ok. You can reset your trip odometer in less than a minute. With ignition ON, Press the BACK BUTTON on your steering wheel until the MID displays the Odometer and Milage Screen Press OK Select YES for Odometer trip reset When done, re-try the maintenance service reset procedure. Wish you luck

[@trowaa12]

Over explaining. Video should be 30 seconds long

[@emmapilex]

You are probably right for certain audience.

[@richardjeun]

Skip to 1:24

[@emmapilex]

Lol. Introduction could be helpful you know. Not all of my subscribers (or content viewers) are DIY geeks. That's the beauty of diversity. Same video, but each picks what seems useful to them. Thanks for the subtle feedback.

[@richardjeun]

@@emmapilex yes, it is helpful, but not when you have to watch it again because you need to repeat the instructions.

[@JAdotNET]

Mine says it cannot be carried out. I tried several times

[@emmapilex]

Oh! So sorry. Any progress yet? Still need guidance?

[@JAdotNET]

@@emmapilex yes it will NOT reset. I have a 2018 GLE350

[@JAdotNET]

@@emmapilex the Mercedes dealership told me they could not reset it unless they did a full recommended service on it. There’s nothing wrong with it & I have kept the service maintenances up to date until last year & I paid cash for my vehicle brand new! This is ridiculous!! I should not have to pay to have it turned off!!! I maintain it with a local gas change as I’m an hour from a dealership

[@emmapilex]

@@JAdotNET ok. I see. Actually it is good practice to reset only immediately after service, not between service due dates. So apart from the inability to reset, are there any other codes like check engine etc, I'm thinking there's an interlock of some sort that's preventing the reset execution command.

[@JAdotNET]

@@emmapilex no the service light was reset by MB last & I have taken it to get an oil change because it’s due but no other lights or indications of trouble whatsoever.

[@vigarmotors7479]

mama mia so slow

[@AdewaleShefuwa-dh8nk]

Houda

[@AdewaleShefuwa-dh8nk]

P o 700

[@emmapilex]

Check this out to see if it's helpful www.solopcms.com/blog/p0700-code-means-fix/#:~:text=The%20P0700%20code%20indicates%20that,to%20shift%20gears%20when%20necessary.

[@emmapilex]

I know that sometimes overheating can cause your TCM to throw up codes. Be sure to rule out overheating.

[@This_tub]

Can you talk any slower? . I reset my car thanks. But it was painful listening to you though.

[@emmapilex]

I am sorry, will watch that on my next video. Thanks for the feedback

[@vaughnjoseph1020]

You talk to much

[@jaywinston990]

Lmaooooo

[@Lucky_Logan]

Dude jeez. You’re talking so much and over talking what you’re trying to do. Basically the entire video you’re just repeating yourself constantly.

[@emmapilex]

Thanks for the feedback.