2018-2020 F150 HD Replacement Front Bumper Review & Install

[@americantrucks]

Shop this HD Replacement Front Bumper: amtrucks.at/2JqGxZK Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg

[@gmohtx8540]

You say it dropped the front end any? Since it’s heavier? 1/2 inch maybe?

[@quiquegavilan24]

The removal part of the Bumper was right-on the money!!! Thank you very very much. I saved $175.oo for the installation of the front tow hooks. It took me about 2hours total including trimming the plastic shield ( I am a perfectionist), but I could have done it in less time!!- Again, thank you for sharing these type of tips to the Community!!!

[@davidbishop4015]

Nice bumper and enjoyed the install. Very interesting and professionaly done.

[@jjordan6781]

Looks like this was the V8 model. Will this bumper/install work for the 3.5? How much does the intercooler interfere?

[@truckmetalnotplastic]

Is that receiver rated to be a winch point? The only way I’d buy this.

[@VARider1]

2nd the request. Need the tongue weight rating of the receiver as I need to put a 300 lb. enduro bike with mounting tray on the front.

[@truckmetalnotplastic]

@@VARider1 the clowns at American trucks don’t back up anything they advertise they just take the money if you buy from them.

[@alextrainor2552]

Will this fit a 2015 with some fabrication?

[@americantrucks]

With fabrication - anything is possible. But it would be much easier to order a bumper that is specific for 2015-2017 model F150s. -Zach

[@alextrainor2552]

​@@americantrucksi just realized theres an identical ranch hand bumper for the 2015 on your website

[@sethsmith9703]

I bought a used one off market place intended for a 18-21 model f-150 and this exact one bolted right up to my 2015 F-150 no modifications.

[@ZenoticGaming]

the 15-17 model bumper uses the same steps in this video, just installed mine!

[@ppepperoni3570]

I'm putting thos same bumper on my Camry, will be used the same.

[@seanm1054]

@AmericanTrucksFord What size Wheels and Tires are on the truck in this video??

[@gmohtx8540]

WILL THIS FIT 2021 f150?

[@medinaruben786]

What front lights can recommend I have 150 like this one and drive at night but don't feel that the fabric heads lights are too secure. Did you tested that front headlight? You'll see what I talk about it. I work at nights also. Thanks if can reply.

[@jullian8907]

The only reason i watched this is bc i like the look of the bumper also can ya do this but fir like 2000s f250-350

[@RonMarish]

Weight?

[@truckmetalnotplastic]

So do you plan to answer questions or should this channel be written off?

[@teop7887]

Too heavy, too big, too expensive, destroys your approach angle, and with a winch, makes the truck too nose-heavy. The only thing this bumper is good for is to get through rioters and looters.

[@gregmach8230]

Buy the original not this rip-off

[@satalac]

I bought this bumper for protection. I don't go offroad all that much, but do plan on getting a 2" lift to raise the front end back up. It dropped about a half inch with this. I had my truck in the body shop twice within 6 months because of deer and someone who thought a left turn lane was a right turn lane. If you do a lot of offroading, I wouldn't suggest this one. If you're wanting a lot of protection, this one is hard to beat for the price.

[@cptbutterbeard9779]

@@satalac it’s good that you bought it but ranch hand has the original for basically the same price.

[@luker6766]

@@cptbutterbeard9779 (cough) bullshit! Mmm so listen I bought one for my 2020 ram 1500 sport ranch hand doesn’t make a full bumper replacement with the schedule 40 pipe for 1/2 tons any more older models yes steel craft i used too think was just a rip off shit brand but after having one for almost a year I can say I not only saved money on the bumper itself but also on not having too go buy a new truck because I popped a deer at 75 ranch hand is king but they are not the only good bumpers out there I got my steel craft for about 1,010$ Online shipping and handling so that compared to 1700 or 1400 is better

[@cptbutterbeard9779]

@@luker6766 ok

[@ColtonBlumhagen]

This is way too heavy to put on the F150.

[@gregmach8230]

You ripped off Ranch Hand bumpers

[@americantrucks]

We carry Ranch Hand Bumpers right here though? 👀 -Zach www.americantrucks.com/ranch-hand-f150-summit-front-bumper-fsf18hbl1.html

[@luker6766]

Do you even have a truck ? Or just stare at granpas waiting for your license these bumpers are cheaper and believe it or not thicker than ranch hand and probably last longer since ranch hand uses an ass paint I love ranch hand but for the price and quality it’s not the greatest like they used too be

[@ghostmofo5829]

Laughable. Why in the world would anyone need this thing? LOL

[@chadworth66]

Cattle in the road, bad drivers cutting you off, people that protest by standing in the road.

[@ghostmofo5829]

@@chadworth66 have to agree with the protester aspect.

[@tylerd.8766]

I had the same bumper on my 2016 f150. Hit an entire heard of pigs here in Central Texas. Zero damage to the truck. Impact was hard enough to sheer 6 bolts on the bumper. Quick trip to the hardware store and it was good as new. Now I have the same bumper on my 2019 f150. Deer and pigs are a major issue in our area. Bumper quickly pats for itself.

[@satalac]

I used to think the same until I hit a deer in December, got it fixed, then a bad driver cut me off and had to go back in the shop in 6 months. Got tired of it being in the shop so I bought this. Just because you don't need it doesn't mean other people don't.

[@luker6766]

Not everyone lives in a big city with there truck on 26x16s and 37 inch tires some people take a rural drive too work where there’s more than just house cats roaming the road there are deer hogs and other big ass animals hit a bear with your stock bumper and see if you’re not having too go to too the dealership for another truck