I bought a a replacement fob on amazon for my 2022 XLT. All the online directions failed until I found your video. This works, Thank you!!
@PYR-AutoАй бұрын
You're Welcome! Glad it helped
@somaliskinnypirate Жыл бұрын
F350 2022. After many printed instructuons that overcomplicate the process, your simple video nailed it. Thanks
@PYR-Auto Жыл бұрын
You're Welcome!
@elmp734 ай бұрын
I bought an extra key fob. I took one look at the instructions and then I Googled and found your video. It took me less than two minutes to program my extra fob thanks to you. Thank you. Now I have to go to a locksmith to cut the key in the extra fob.
@PYR-Auto4 ай бұрын
You're Welcome! Glad it helped
@geoffreydaenen32552 жыл бұрын
Followed this guide step by step. No luck with key fob programming.
@JonFarber3 жыл бұрын
Yes, it's the same for F150. Nice video, good idea to use the dings for timing.
@robertboener Жыл бұрын
Many other instructions omit the dings, I was turning mine off too early and it would not program. Once I waited it worked on my 18 Exploder
@Tubewatcherpotato Жыл бұрын
Thank you best video out there. Works on Ford bronco
@PYR-Auto Жыл бұрын
Glad it helped!
@user-lw8qq8qc6d6 ай бұрын
do you have a video for a 2021 bronco? i tried this and the unlock and lock buttons work on the new key but the remote start does not.
@mohammedyk45983 жыл бұрын
Thanks for excellent video I tried to program new one for my 2018 Ford Expedition by following same procedure and it showed me at the end the programming completed successfully but the buttons not works. Only I can started the vehicle if I put the remote in backup slot. Also I repeated the same procedure many times but no benefit. Could please help and advise.
@PYR-Auto3 жыл бұрын
It sounds like the battery in the new fob might be dead, I would start with with.
@mohammedyk45983 жыл бұрын
Thanks for your respond. I already replaced the battery by new one but still the buttons not working and my vehicle didn't detect the Intelligent Access key fob.
@PYR-Auto3 жыл бұрын
Are sure you installed the new battery correctly? ( not upside down )
@دليلالمستقبل-و7ط3 жыл бұрын
Make sure the remote frequency
@mohammedyk45983 жыл бұрын
@@دليلالمستقبل-و7ط How can I check remote frequency?
@bzldzl Жыл бұрын
Does the new blank key has to be a fresh OEM un-programed key from the dealer or can I buy a "gently used" key online which most likely may have a program mated to another expedition?
@PYR-Auto Жыл бұрын
You can program a used key on these
@scottspicer971 Жыл бұрын
how if I lost a key?? I’m trying to replace a lost one and he tells us ya need both? I’m flabbergasted!
@lufan50756 ай бұрын
One of the two original keys was lost. The dealer programmed a third key, so I have 2 working keys with me. By using the third key and one of the original keys, can I programm a 4th key this way?
@PYR-Auto6 ай бұрын
yes
@matthewharmon8525 Жыл бұрын
Hello. I am trying to make this work on my 2022 Expedition Max. I’m not having any luck. It says key program failure. I’m trying to do this with an OEM replacement key. Any thoughts?
@PYR-Auto Жыл бұрын
This only works on the 2018 - 2021 Expedition. Unfortunately there is no manual way to program the fobs for a 2022 - you will need an automotive locksmith or dealership
@adirondackwoodsman8 ай бұрын
It says programming successful but it didn’t work. Nothing when I press the remote. This is a remote from my 2019 Expedition. New vehicle is 2024. The FOBs look identical
@aieadmohammed57933 жыл бұрын
I bought ford expedition platinum 2019, and my friend bought also ford expedition limited 2019, both cars are used cars, with two remote keys for each, my friend car was stolen, when we checked the CCTV, we knew it was stolen by a third remote key. Can I change the remote keys code of my car ?
@PYR-Auto3 жыл бұрын
Not that I am aware of - A locksmith or dealership can erase all previous remotes but it doesn't change the code
@aieadmohammed57933 жыл бұрын
@@PYR-Auto thank you for your reply.
@logeen7 ай бұрын
hi, i have Fusion Hybrid from 2019 and 2 original keys. bought 3rd from Aliexpress and try programming . i have the same info about sucsessfull programing 3rd key but when i push buttons on the key car dont do enything //sorry for my eng. ;)
@PYR-Auto7 ай бұрын
have you tried replacing the battery in the key fob?
@logeen7 ай бұрын
@@PYR-Auto no, not jet but i will try. 902 or 315 MHz - what you think?
@PYR-Auto7 ай бұрын
not sure but they use a CR2450 battery
@adamtoman5855 Жыл бұрын
Will this method work on a 2020 navigator?
@PYR-Auto Жыл бұрын
Yes
@vickeysmithtxchp91422 жыл бұрын
I tried this on a 2022 Ford Expedition and it didn't work, is the 2022 different?
@brandonshealy39622 жыл бұрын
I'd like to know the answer to this as well
@PYR-Auto2 жыл бұрын
Yes - unfortunately they took away the onboard programming for 2022. You will need a locksmith or dealership
@brandonshealy39622 жыл бұрын
It worked for me. 1 ding turn off change key 1 ding turn off change key 1 ding new key boom all good. There are 3 different part #s for 22 expedition smart keys that I see.
@PYR-Auto2 жыл бұрын
Interesting - the information from Ford shows that it can't be done onboard but that's good to know, thanks
@remingtonporter17342 жыл бұрын
I wonder if this will work on my '21 Explorer?
@PYR-Auto2 жыл бұрын
It will not - there is no manual way to program key fobs to a 2021 Explorer
@justcooking614415 күн бұрын
You might try this guy's video. He says it works on the 6th gen key fobs which start with the 2020 Explorer. I had success on a 2020 Explorer. kzbin.info/www/bejne/qmKrmJh8e8xgfNksi=iUSm7uQg0id-MtwR
@TheHenrydom10 ай бұрын
Will this work on a 2021 Ford Explorer Limited ?
@PYR-Auto10 ай бұрын
No
@justcooking614415 күн бұрын
You might try this guy's video. He says it works on the 6th gen key fobs which start with the 2020 Explorer. I had success on a 2020 Explorer. kzbin.info/www/bejne/qmKrmJh8e8xgfNksi=iUSm7uQg0id-MtwR
@jong77533 жыл бұрын
Is this the same for a F150? I'd like to try it...
@PYR-Auto3 жыл бұрын
If your F-150 has a push button start ignition and depending on the year then it will be similar. You can find the full instructions here www.programyourremote.com/classified/f150-250-browse-207.aspx
@JonFarber3 жыл бұрын
Yes, I did it and it worked
@stevemartin6034 Жыл бұрын
How many extra key fobs can be set up ?
@PYR-Auto Жыл бұрын
You can have up to 4 total
@Centarlock6 ай бұрын
What about if I have One smart programing only
@PYR-Auto6 ай бұрын
You will need an Automotive Locksmith or Dealership
@brianpaul68733 жыл бұрын
Different process on a 2021 F250? It didn't work for me.
@PYR-Auto3 жыл бұрын
Unfortunately there is no manual programming procedure for a 2021 F250 - You will need an automotive locksmith or dealership
@изиДи-е7ч3 жыл бұрын
Nice
@PYR-Auto3 жыл бұрын
Thanks!
@rthinds Жыл бұрын
This is a good video, but this does NOT work for a 2022 SuperDuty, despite having identical key fobs. When the last key fob is inserted into the "backup slot", the response from the truck is the same as the previous 2 key fobs (i.e "Press brake to start" - probably because it recognizes the other 2 legit keyfobs are inside the truck). Doesn't work.
@arbaum197205173 жыл бұрын
lol why make it so elusive put the key in hole count to 10 stand on one leg lol do 3 laps around vehicle, wink left eye. who am I kidding I got one those cars too
@katforis95782 жыл бұрын
So my Dodge Nitro was kicking in anti-theft randomly and shutting down my SUV while at stop lights. Went online in a similar fashion to this KZbin expert and was told to hold my Fob in my right hand and circle the SUV 3 times clockwise beginning at the driver's door. My brother laughed when I told him and said someone was feeding me voodoo BS and getting a good laugh at my expense. Well it worked, reset the system and no more shutdowns. Trust the experts! Cars are so high-tech now sometimes what seems like a a simple solution works.
@elimccrory6252 жыл бұрын
Will this work if I only have 1 key for my 2019 Expedition Max?
@PYR-Auto2 жыл бұрын
No
@katforis95782 жыл бұрын
@@PYR-Auto What do you need to do if you only have 1 working fob?
@katforis95782 жыл бұрын
2020 Expedition Ltd.
@Subypowa Жыл бұрын
will this work on a 2020 Ford Explorer?
@PYR-Auto Жыл бұрын
No - there is no manual way to program fobs for a 2020 Explorer. You will need an Automotive Locksmith or Dealership
@justcooking614415 күн бұрын
You might try this guy's video. He says it works on the 6th gen key fobs which start with the 2020 Explorer. I had success on a 2020 Explorer. kzbin.info/www/bejne/qmKrmJh8e8xgfNksi=iUSm7uQg0id-MtwR