Рет қаралды 66,069
A step by step video on how to program a smart key remote fob to a 2018 - 2022 Ford Edge.
More free DIY programming instructions available at www.ProgramYou...
The Ford Edge owner's manual contains the following information on how to program or pair a new remote fob smart key.
You must have two previously programmed smart keys inside the vehicle and the new unprogrammed smart key readily accessible.
Note: A maximum of four smart key remote fobs can be programmed to your Ford Edge. If you would like to replace a previously programmed smart key with a new smart key remote fob, or if you already have four smart keys programmed to your vehicle, you must contact a Locksmith to be erased and reprogrammed..
1. Remove the key blade from the smart key remote fob.
2. Open the Ford Edge center console lid. With the buttons facing upward and the unlock button facing the front of your vehicle, place the first smart key remote fob into the backup slot.
3. Press the push button ignition switch.
4. Wait five seconds and then press the push button ignition switch again.
5. Remove the smart key.
6. Within 10 seconds, place a second programmed smart key remote fob in the backup slot and press the push button ignition switch.
7. Wait five seconds and then press the push button ignition switch again.
8. Remove the smart key remote fob.
9. Wait five seconds, then place the unprogrammed smart key in the backup slot and press the ford edge push button ignition switch.
Programming is now complete. Check that the smart key remote control functions operate and your Ford Edge starts with the new smart key.
This remote key fob programming procedure applies to following Ford models:
2017 Ford Edge ( SE, SEL and Titanium )
2018 Ford Edge ( SE, SEL and Titanium )
2019 Ford Edge ( SE, SEL and Titanium )
2020 Ford Edge ( SE, SEL and Titanium )
2021 Ford Edge ( SE, SEL and Titanium )
2022 Ford Edge ( SE, SEL and Titanium )
Find a Locksmith in your area with www.LocateALoc...