2018-2022 Mustang GT Gets Roush Styling & Functionality w/this Hood Heat Extractor Install

[@Infidex77]

Installed these on my 18, I almost sent them back when I saw the drill part but I installed them without drilling the extra two holes and you can't tell a difference. I put some 3m tape on the plastic boss where the top two threaded inserts go, and the 3m supplied tape that goes around 3 sides of these is more then enough to hold it in place along with the 4 holes that already exist. This allows me to switch to something else one day if there are better options or go back to factory inserts if I don't like them. Installed both in under an hour, no permanent holes in my hood.

[@thomashutson3681]

Good improvision!! I watched this video and was like WHOA!!! Drill into a $45k car I just purchased!! I'll pass.

[@eduardosalas4348]

Hey Richard J how the Roush heat extractors till this day still holding ? Thinking of buying them and doing the same thing you did don’t want to drill my new stang 2019

[@TheGreatRuomal]

Thats way too much labor for such a small mod. No way in hell am I drilling into my 2018 hood....Thanks for the video though

[@thomashutson3681]

I said the same thing. I couldnt do that to a $44k car.

[@jp23x]

Thomas Hutson you already lost if you paid 44k haha

[@thomashutson3681]

To each their own bud, just making reference to a brand new vehicle. $44k is asking price.

[@jp23x]

Thomas Hutson stangmode (I think that's his name on here) paid 48k for his 2018 mustang. He did one of those videos where you go to CarMax to get an appraisal...they offered him 28k and the car isn't even a year old. Moral of the story? Gts are not worth msrp. They're mass produced and you should get a deep discount without even breaking a sweat.

[@thomashutson3681]

I agree with you none the less. All I was saying....If I paid $44k for a vehicle (Mustang or another vehicle) Im not cutting holes in the hood. Ive seen the Carmax video, that was crazy. Ive also see the Dodge Hellcat appraisal it was undercut by almost $30k. Another appraisal was a collector edition Lambo was undercut by over $3M. Id take Carmax pricing with a grain of salt, they are a business and have to sell what they purchase. So dont expect to get a price you feel is good.

[@chanklerchankler9060]

"This is the part where we have to drill the hood ..." .... hard pass.

[@thefwenkmeister972]

4 screws is enough to hold them into place, use some good outdoor doublesided tape and they will hole without a problem, no need to drill more holes

[@lucashaman1010]

Not bad, but I'll stick to stock on this one.

[@MendicantBias1]

Why does Roush feel the need to make products that almost always require drilling into the hood/bumper? Does Roush really think 4 bolts won't hold their extractor on the hood? Gotta have 2 more?!

[@djwarren5081]

I can't imagine that will be a popular mod.

[@stevenp3176]

If you're going to drill two holes in middle of the hood might as well go all the way and cut the opening to make full use of the vent size. What's the difference in the end?

[@racksteris]

it looks really good on my red car. i did't drill the 1'' hole the studs were long enough.

[@cemsengul16]

I really want to see these heat extractors paint matched

[@mikeslocum9928]

This is definitely a no-go for me too. Someone please make a dual ram air intake like on the ‘67!!!!

[@jp23x]

Why are people in the comments so mad? This looks way better than stock haha. The same people must like the factory exhaust too

[@TheDylanPlayer14]

Stock exhaust sounds a lot better than 2015-17

[@johndefriee1982]

looks great on my 2019 Shadow Black GT Mustang

[@liptonicetea274]

is that little vent hole even functional? any way we can make it larger?

[@tonyankyfan]

Great video, thanks. Question? After you install and nut everything up from bottom, do you reinstall that original black under piece to the roush air scoop? Or trash it... thanks Anthony

[@AdamSVT]

looks good.. and great attention to detail. I was surprised they didnt ask you to use the hole saw on the inner rear stud as well. I guess it's not doing a tremendous amount of work holding the part down though.

[@timojaramillo2249]

Think i'll just pull of the factoy vents and vinyl wrap them black. No drilling and leaves options open.

[@stevelang26]

They look great but mine is that new blue

[@uchengkuok5844]

How about if it heavy rain .will water get inside the engine?

[@Ford_Raptor_R_720hp_V8]

I trust the Directions and my Workmanship. I'll use Brand New Drill Bits, and perform the process slow and steady

[@renegarcia7591]

Looks sick! 18 owners should definitely consider this

[@cemsengul16]

I would really like to see these heat extractors paint matched. I haven't seen any pictures of my idea online

[@officialtjtrev8910]

That’s actually a good idea

[@jamesharalson1317]

I prefer the factory heat extractor on my 2018 GT

[@israel984]

that piano black gloss is hard to beat

[@lobbyrobby]

I watched the whole video but I was out when I heard 7/32 drill bit

[@Jimmymaac]

hey guys i just bought a brand new 2018 mustang gt, any advice on must dos? literally only did some cosmetics and bought a jlt oil seperator, thanks

[@forsythecharles2931]

I can tell you that this is a must NOT do. Drill holes in a brand new Mustang hood, to install a couple pieces of crappy plastic? SMH

[@jj_cruz]

The only advice I can give you man, is DO what makes you happy. If you think it looks good then go for it. At the end of the day it's YOUR car. Don't let opinions effect yours. 👍

[@Threefiddyz]

whole lot of work compared to the two nuts and couple of clips on the 15-17 extractors...

[@Zander13Productions]

Good install. I need to get some

[@mavricxx]

Too much work just to install some insignificant mod! Why couldn't they just have some of the work like the studs and the double sided tape on so all you have to do is line it up and peel it but the worse part is drilling on your BRAND NEW hood...no freaking way man!

[@cemsengul16]

I cringed watching him drill a 2018 Mustang GT

[@cgr88m]

Great video, cowl hood it is.

[@cjponyparts]

Thank you!

[@Nitro91]

ehhh it doesn't look good on a orange mustang.. mabe on a black or grey mustang it would look less cheesy

[@josebrito4442]

Way to much work, and I ain't drilling my hood for something that doesn't look that good

[@edwardvickers5506]

The original vents look better!

[@nigeldavenport6319]

Great video, terrible product. Roush is an "engineering" company, but none of their products fit. You always have to drill, cut, or otherwise modify your car for their products to fit.I will wait on one of the dozen of companies that will release these and use the factory holes.

[@brysonrodden5112]

Roush isn't focused on ease of install they what the products to fit perfectly with some modifications to the vehicle itself.

[@carstuff4u942]

I totally agree.

[@pistolgrip70x]

Way to much work

[@raydog1111]

Cheeze Whiz just turned into Swiss Cheese thanks to this mod. And it also ruins the clean lines that make the 2018 hood look so slick. Just went from "classy" to "a$$-y." Not going anywhere near my 2018 GT with this one.

[@charlesdegener7002]

A lot of work to gain nothing! Strictly looks I like go not show

[@ancientruinsofficial]

😒😒😒😒

[@carlosviera656]

All this work ? Nah im good....$230 for this mod... lol im definitely good i passss

[@Kevinrfty]

Totally NOT worth it.