Рет қаралды 551
Short video of the 2018 GT Pro Performer 26” in dayglo pink out for a ride.
Modifications include
Odyssey GTX gyro
www.danscomp.c...
Odyssey upper gyro plate
www.danscomp.c...
Mission gyro tabs
www.danscomp.c...
Odyssey upper and lower gyro cables
www.danscomp.c...
www.danscomp.c...
Dia Compe 883 front brake (new)
www.porkchopbm...
Dia compe 996 rear u-brake (new)
www.porkchopbm...
GT 2nd generation New Old Stock (NOS) Forkstanders - no link for these as you have to buy them from Evilbay or the BMXMUSEUM.
Longer metric Allen cap screws (4x) to allow the Forkstanders to mount on the 1-1/4” fork tube diameter (32mm).
Use M8 x 1.25 x 30mm stainless steel.
www.mcmaster.c...
Black ops starnut headset pass through for the front brake cable.
www.ebay.com/p...
Dia compe front and rear Tech 77 locking brake levers. In white. Similar to the Tech 7’s from back in the day. These are great because they lock so you can keep the bike from moving (when set up properly) and have a swing clasp design so you don’t need to remove your grips to install or remove them.
www.porkchopbm...
Primo titanium crank spindle
This item is no longer available but I upgraded my GT Power series chromoly spindle to titanium.
TLC bikes titanium spindle bolts for the GT Power series cranks. I have not seen the silver color versions in years but TLC Bikes has the oil slicks versions available from time to time. Again these have been out of stock for years.
shop.tbb-bike....
Chrome plated M8 pinch bolts (4x) for the GT Power series cranks. Haven’t been able to get these anymore either. They require m10 diameter head. Most stuff is M12.
Suntour 28.6mm white seat clamp
www.porkchopbm...
KMC 1/8” white/black chain. Very close to the original GT chains in the 80’s used on the freestyle bikes.
samsbmx.com/pr...
GT cheat code BMX padded seat. Not much better than the stock seat but I can ride on it for another 10 minutes. Lol
www.porkchopbm...
Black ops pegs - any new school pegs will work. Threads are 3/8”-24 or 3/8”-26 for the Superlace hubs or the Mohawk hubs depending on your bike.
Black Ops GL BMX Pegs, 40 x 100 3/8-14mm a.co/d/dZod3K3
Or GT pegs
www.porkchopbm...
Titanium stem bolts for the new school GT mallet stem.
www.porkchopbm...
GT team model (1987) decals
These were leftovers I had from Ultrahive repop 1987 GT Pro Freestyle Tour Team Model set. They really don’t belong on the bike but I threw them on anyway.
I also used a Dia Compe rear brake cable to run the front brake line.
www.porkchopbm...
And white Dia Compe cable hangers. Have not seen these in white in bit but you can always spray paint them white.
www.porkchopbm...
I used two of them for the front left fork to keep the front brake cable from touching the tire and being in the way.
Pink dice caps
www.bicyclehea...