2018 Tacomas steering wheel on 4th gen 4runner.

[@Korang500]

NICE! Will do this too my 4th gen 4Runner soon.....4TH GENS NEED LOVE TOO

[@Libyanman]

About a month I was thinking to do the same for my 4runner. Thank you so much

[@tristonnunn1240]

Love the videos all of them are great tutorials. looking forward to some of the upgrades I can add to my 4th gen

[@Nashharis8758]

Thank you 😊

[@Nashharis8758]

Please please please please subscribe

[@eugenen5953]

This video is SUPER helpful! Were you not able to re-use the cruise control cable that came on the Tacoma steering wheel to avoid cutting the 4Runner wheel's cable? Is it a different plug?

[@Nashharis8758]

Yes, the 4runners have their own plug in. Tacoma is wired with the rest.

[@eugenen5953]

@@Nashharis8758 Sorry maybe I'm misunderstanding something, I was asking about that white plug that's hanging from wiring from Tacoma wheel, can't that be plugged into Cruise control plug of original 4runner cruise control?

[@Nashharis8758]

@@eugenen5953 ha I see what you're saying. No, because you only have one connection switch for the 4runner. You have to pin the wires for the cruze control. It's kind of hard to explain over the keyboard but if you follow the process in this video you should be just fine. One thing I do want to say, couple of the steering wheel buttons don't work. I just couldn't figure out where they should go.

[@hubbcapp2109]

Dry helpful Nash, thanks Bruh.

[@74blkrose]

hey buddy I have the 05 4 runner and those lights flashing on you dash is the steering whell alignment sensor it has to be reset it's from bad rack and pinion or removing the steering wheel toyoman

[@Nashharis8758]

Thank you sir, I just bought a rack and will replace it soon.

[@JD-ys7fj]

this is the youtube content i like. fuck my recommended homepage of crap lol. time to hunt for a new steering wheel for the mrs...

[@ZainR77]

Hey Buddy, First of all great videos keep filming more tips. I have a question regarding the 2wd - 4wd switch i noticed you have a 2wd and 4wd switchable is that an add on ? Or you bought like that. Is your vehicle V6 or V8? I have the same car with V8 engine but it is only a 4wd is there any option or parts to change so i can make it a switchable ?? Thanks

[@Nashharis8758]

Thanks bud, I have a lot more videos but need to find time to put them together and post. Mine is a V8 and this option was included from the factory. I'm sure there's a way to add/replace the module which is under the glove box but you'll also need to replace a ton of wiring and probably buy a whole new wiring harness and will cost you a fortune. I say best leave be brother lol

[@ZainR77]

@@Nashharis8758 thanks for the quick reply, actually i live in Dubai and the parts here are cheap but i need a guide or a link to know the exact part that i need to get and how to install them to make it 2wd switchable as i checked many time in the market we dont get a 2 wheels drive 4runner here and overall this car is rarley to find because it is imported from USA.

[@mosbsatat1342]

Hello i love your videos is there any chance that you know away to change the climet control unit from imperial to metric and do vedio about it

[@Nashharis8758]

I've never put in any thoughts. But I'lllook into it and might be able to.

[@abrahamcarrillo2121]

Would this work if I just cut the pin connector and color matched soldered it to the 4th gen pin connector?

[@jacksonvlogs7342]

Did you find the steering wheel with the airbag, or did you have to purchase separately?

[@Nashharis8758]

Separately. Most sellers will separate them, but if you message them, they might have both.

[@crispyjokingtuna1495]

Do you think that the buttons that didn’t work works work for an oem head unit upgrade?

[@praqc]

Did you use the stock clock spring?

[@HectorGarcia-cj4ls]

The airbags connectors are the same ???

[@Nashharis8758]

Yes they are.

[@HectorGarcia-cj4ls]

@@Nashharis8758 thank you sr.

[@Bimmerrx7]

This is great! I noticed you have a different style head unit I’ve installed an android one as well but I had difficulty connecting it to the steering wheel controls. I could never determine the three wires used for that. If you have any knowledge around the wires I would definitely appreciate it

[@Nashharis8758]

Nelson, I would have to mess with it myself lol I can't advice anything buddy I really would need to see your set up and what you have for the head unit. I can tell you the one I have needed no complications to set it up, customized it the way I wanted each key to work.

[@Bimmerrx7]

@@Nashharis8758 I need to dig in to it again soon. I’ll try to take some pictures when I do that. I’m using the ATOTO head unit. Thanks for responding!

[@chounglee5741]

@@Bimmerrx7 did you figure the volume control out? Do I need to add resistor or can I connect volume control wires directly to Atoto?

[@Bimmerrx7]

@@chounglee5741 Unfortunately I did not. I lost the vehicle last year in a head on collision with a drunk driver.

[@frank_e_stein]

Should we disconnect the battery first?

[@Nashharis8758]

For your safety, yes. I did for the airbag part but failed to mention it.

[@markbriton-jones3534]

Where did you buy the wheel? Also what year range for the Taco wheel? I know this is 2018 but do you know what the year range was for this wheel? Thx.

[@Nashharis8758]

2015 and up. I bought it off ebay.

[@jboone89]

Did you have to purchase the steering wheel separate from the airbag?

[@Nashharis8758]

Yes, most used parts seller will separate the airbags from the wheels. But, before I purchased the wheel, I sent a message to the seller and he sold me the matching bag as well.

[@jboone89]

@@Nashharis8758 awesome, thank you for the quick response and for making this video. You're one of the few that have a DIY vid

[@Nashharis8758]

@Jeff Boone you're welcome bud.

[@jaimemuniz5019]

Did you buy a Tacoma airbag or a 4Runner airbag ? I'm asking because I'm thinking of buying a 2008 4Runner that did the same upgrade but the airbag light is on. He used the Tacoma airbag. @@Nashharis8758

[@xXxXdr0pDeadxXxX]

How did you wire the dasaita to the original wheel ? I have the same radio but don’t know how to get my buttons to work

[@Nashharis8758]

Did your steering wheel controls work before?

[@eliovisita]

How much you spent? Seems like it’s a super expensive mood

[@Nashharis8758]

I bought the wheel off ebay for I think $250.

[@Broseidon09]

Hey nash im currently doing this mod to my 4runner also but with a 2018 steering wheel, i could really use ur help to find out what cables need to be re-routed since mine has difrent colored cables and i think it has 2 or 3 more than what you came across

[@Nashharis8758]

Kevin, I'll try me best bud. Have tou tried looking up the wiring diagrams for both?

[@Broseidon09]

@@Nashharis8758 ive only found this for the tacoma steering wheel but honestly dont know how to read it or know exactly if that is what i need www.ttguide.net/steering_pad_switch-283.html

[@Broseidon09]

Besides that ive only figured out where to rewire the cruise control cables and horn cable

[@Nashharis8758]

@@Broseidon09 I see. Can you color match some?

[@Broseidon09]

@@Nashharis8758 none

[@hubbcapp2109]

did the same upgrade and got all steering wheel controls functioning accept that they wont illuminate. WTF, HELP.

[@Nashharis8758]

So the red wire is for the lights. Did you put that in the right location? If yes, check and see if it's all the way in and snug in the connector.

[@hubbcapp2109]

@@Nashharis8758 Man , Thank you so much for responding, I put a 2012 or 13 on my 2011 and by shear luck everything works accept illumination, I dont know what location it should be in

[@hubbcapp2109]

Nash, I have the airbag and controls out as we speak, if you get a min could you walk me thru it, this is so annoying.

[@hubbcapp2109]

Meant to say very helpful not Dry, my apologies.

[@TrackFactory]

how did you get the wire into the connector without the right pins?

[@Nashharis8758]

They simply snap on and off with the pin removal tool. Also, the pins are alike. Just needed to relocate a few.

[@beimerja]

What lights were flashing? And did you figure out how to reset them?

[@Nashharis8758]

Yes, they are for the master cylinder. Will post a video about it once I get a chance to fix it.