2018 Toyota 4Runner Icon Stage 7 CHOPPED for 315/70/17 Tires!

[@88ROTORS]

SUBSCRIBE FOR MORE DAILY VIDEOS!

[@nicky407]

88ROTORS how much was the stage 7 and labor? Do you guys do regear?

[@Pb_Slinger]

It takes a special kind of shop to do this kinda job for a customer BEFORE they re-gear. Good job guys… Dude says below, he put 10k on the odo before moving to 4.88 diffs.

[@ernietrujilloet]

That 4runer did look like a beast

[@88ROTORS]

Agreed!

[@zacktorro9732]

Thats about the best lift I have seen yet on your channel. Great job guys!

[@88ROTORS]

Thanks!

[@CNExplore]

Sweeeet! Didn’t know y’all made a video on the truck till Johnny let me know! Hahaha

[@Elboogie777]

I like the change in music....701's are nice too 😁✌

[@88ROTORS]

Thanks! We can’t please everyone when it comes to music. We have guys loving some and hating some.

[@White_buffalo_4r]

We just did the full Toytec lift with Hefty front bumper and BMC on our 17 4runner and was thinking of wanting to run the 315 in the Cooper's. The more I see this the more I think the 315 are the option to go with on it

[@7150285]

re-gearing the rear differential can be expensive. From what I've heard is that anything larger than 285/75R17 which is also 33.8" tire re-gearing is needed, if not then VERY recommended. Anything larger than 34" tire in diameter requires re-gearing.

[@CNExplore]

Regeared it for $1800 to 4.88s, running like a champ and no more hiccups. Drove it for about 10k miles before I ended up doing so though

[@7150285]

@@CNExplore what tire size are you running? I have 32.8" 285/70R17 running on factory stock gear just fine. If I go bigger and heavier, re-gearing probably needed from what I've been told.

[@CNExplore]

@@7150285 Haha. This is my car in the video sir, feel free to follow my page on instagram @cnexplore if you'd like. I haven't been posting much content due to COVID. Other than that, I'm probably going to go true 35s for my next set of tires once these 315s wear out.

[@7150285]

@@CNExplore I'm wanting to get ARB's aftermarket rear diff lock and maybe front as well. Do you know around how much to install lockers on the 5th usually cost for parts & labor? I don't have Trail Edition, TRD OFFRoad or TRD PRO so didn't have electronic rear locker from the factory because I wanted SR5 with third row seating.

[@7150285]

@@CNExplore also if you run true 35 inch tires. Do you think you'll need for lift up front? Icon Stage 7 front suspension coilover is adjustable from factory ride height of 0 to 3.5inch up front correct? Toytec also came out with 1inch body lift few years ago that can be add on with any suspension lift to give more tire clearance.

[@evanhasson6032]

Such a relief to not see brolocks on this one

[@CNExplore]

Evan Hasson that’s what I was aiming for, didn’t like the none functioning beadlocks on each and every rim that comes now a days. It was either these MR701s or full send on beadlocks

[@lloydling2928]

This is a great build! How is the fit and finish of the icons compared to the kings? Does one seem better made than the other??? I’m toiling over which way to go......

[@donnymazinga5295]

Cool video, dudes! 👍🏻

[@danielzettina9300]

Came out Great!! Did you guys set the front end up to 3 inches on these icon shocks?

[@A_Tongcomeister]

For this these did.he do any regearing or engine modifications?

[@CNExplore]

A_tongcmeister I plan on regearing the truck to 4.88. Haven’t had time just yet but will get that done in a month or so!

[@peteco7417]

@@CNExplore where are you planning on getting your rehearing done in socal?

[@CNExplore]

@@peteco7417 I completed my regear locally here in Riverside @ Premier West Gears. Great owner and knows his stuff!

[@markanthony1833]

How much did you spent for the lift and tires

[@CNExplore]

Mark Anthony for a great price 🙃. Hit up 88rotors for all your needs

[@thorsky2754]

Looks great but that adds a lot of weight and drag. Driving it on the highway without regearing and maybe a supercharger would drive me nuts.

[@CNExplore]

Thor Simmer definitely not as bad as I thought, but any small inclines brings me insane. Regear and I’ll all good for now until bumpers

[@evandashiell648]

How much would this whole setup cost? stage 7 (billet) + falcon wildpeaks + install

[@nathanc5789]

Evan Dashiell $10k+ with labor

[@thehayman7352]

How do these tires do in extreme flexing? I’m thinking of going 34s or 305s and I wheel hard. Body mount chop and trimming?

[@lanix17]

Curious if the BMC is needed for 315/70r17s if i have the SPC UCAs.

[@LuisMendez-rd1cw]

Hi, thanks for the video, question, no body lift? only lift kit (Icon stage 7)?

[@JeffTheMark]

I’m looking at the exact same components for my 4runner. Did you have to trim the fenders or fender liners? How did you get 4” out of the Icon lift? Thanks!

[@CNExplore]

Slight trim to the front fender liners done and major bumper chopping alongside with a major chop to the body mount.

[@hectorrios4444]

Is this a 3 inch lift?

[@88ROTORS]

About 4”

[@christopheralexander5121]

Did you have to remove any of the fender plastic liner for the front and rear? Do you think a true 35 would have fit if the front bumper was chopped?

[@CNExplore]

Christopher Alexander I ended up chopping my front bumper to fit the 35s the very next day. Highly advise and I still rub when flexed fully

[@Doubleknottedlaces]

Does this build have wheel spacers?

[@TheCoco300]

Isn’t that size bad for the transmission and differential? Thats Lot of tire… 🤔

[@tnasituning8173]

What is the wheel offset and rim width these 315s are mounted on?

[@duxtonmilam6604]

The method 701’s installed here are 17x8.5 with O offset.

[@doorkicker8507]

Got to change the gear ratio I bet.

[@88ROTORS]

Always a plus to do so.

[@sothickitssickk]

What ratio would be appropriate?

[@Chris.Rogers]

Any idea what kind of sliders are on this 4runner?

[@CNExplore]

tcr2533 shrockworks sliders my guy!

[@goprogreatness3136]

In my opionion, the owner should have put a 1" body lift to get the tires off of the body and other components.

[@roroag1]

How much this cost?

[@evobudbrink]

Hey easy. I’m that type of troll. 🥴

[@88ROTORS]

Haha! As annoying as it sometimes is, it sometimes helps us explain in detail and give more details. So thank you if you’re that troll!! Jk 🤣 thanks for viewing brotha!

[@chaleeher1992]

Gas mileage is going to suck very bad lol

[@Jinyong1219]

get a saloon car with small engine for fuck sake if u are gas milage dude

[@Protein33]

@@Jinyong1219 probably drives a 3 cylinder 🤣🤣🤣🤣🤣 and vegan.

[@CNExplore]

Hahaha getting 12.5 mixed with highway and city. But hey, life happens 🤣