Shop These Rough Country 2-Inch Front Leveling N3 Struts ! : amtrucks.at/3dus1Q8
@FuriousFuria11 ай бұрын
For Rebel owners with the factory 1" lift, do we need these 2" struts or the 3.5" version to level with the rear? Doesn't the Rebel's lift come from the current struts so swapping out for these will only net one extra inch of lift in the front? Thanks!
@monroefive-o406 ай бұрын
Boy somebody has been beating the crap out of that spindle.
@WooGnar9 ай бұрын
I'm sure some Ecodiesel owners may look here and YES this kit 1000% fits and works. Rough Country only states "for V8" cause of weight, however the Ecodiesel is nearly identical in weight to the Hemi. It's fine and R.C. really screwed the pooch IMO on not including the Ecodiesel. The standard V6 is lighter and would be a 2.25" lift per various Ram forums.
@jgarcia7322Ай бұрын
I installed a set on my 2024 RAM 1500 4 X 4. Easy install, better than stock ride. Didn't need to do anything to the rear wheels. The level was great. I will probably replace the rear stock shocks to enhance the rid more. This is the way to level any truck. The upper control arms are stock and not in a bind. I may change them later. Very satisfied with these struts.
@MrJohney Жыл бұрын
Make sure you change your upper control arm. The upper ball joint can't handle the angle
@mr.roboto73309 ай бұрын
Just for 2 inches? I thought that’s only if you’re lifting more than 2
@MrJohney9 ай бұрын
@mr.roboto7330 never mind I have a rebel and it has a 2" factory lift already if I did 2" that would end up being 4". So my comment should apply to me in this scenario
@davidalonso15849 ай бұрын
@MrJohney rebel has a 1 inch factory lift . So If you gave it 2inches of lift . Its a total of 3 inches. On a rebelit I'd recommended to change the uca if it's over 3 inches .
@MrJohney9 ай бұрын
@@davidalonso1584 really, I thought it was a 2 inch lift from the factory.
@WooGnar9 ай бұрын
The 2" leveling won't require the UCA to be swapped out. Although it would be recommended down the line to do so.
@007Knightjp Жыл бұрын
While I am happy to see a new video on here, I thought that all new videos will be on the new Amercian Trucks channel.
@Ricky_R Жыл бұрын
Maybe they realized their mistake. I certainly wasn't going to watch a channel that had Ford and Chevy content.
@AmericanTrucksRam Жыл бұрын
Appreciate you guys watching!! -Zach
@aaronmccubbin63326 күн бұрын
That brake line got the strength of 1000 broncos
@user-vt6ld4lb5p14 күн бұрын
Can you put a spacer on top of these?
@HookedonHD3 ай бұрын
Why not include the torque specs when tightening everything down?
@Bass23 Жыл бұрын
Do have to change the ones in the back to
@crunklescrunkles4425 Жыл бұрын
Which are better, the N3 or the M1's? Just curious
@richardgonu7600 Жыл бұрын
Would this add 2 inch to a rebel or 1 with the original facory lift
@FuriousFuria11 ай бұрын
We need an answer for this!!! This will determine if Rebel owners need this or the 3.5" version @americantrucksram
@MrJohney10 ай бұрын
@FuriousFuria what about a spacer plate for the top of the strut
@FuriousFuria10 ай бұрын
@@MrJohney I installed 2.5” strut and it leveled my Rebel
@MrJohney10 ай бұрын
@FuriousFuria very nice 👌 I've been thinking about leveling mine.
@MrJohney10 ай бұрын
@@FuriousFuria I wish this site would include the ecodisel in the videos and showcase the products they carry for them
@martys4814 Жыл бұрын
I’m sure it needs an alignment after…plus no torque specs…..
@AmericanTrucksRam Жыл бұрын
We absolutely recommend an alignment after any sort of lift or leveling kit! -Zach
@stevefarrell10165 ай бұрын
Are the torque specs on the direction sheet for the 2022 Rams?
@craighogland850910 ай бұрын
anything different on the 22 ecodiesel?
@MrJohney9 ай бұрын
They never do anything specifically for the ecodisel
@WooGnar9 ай бұрын
You can put this on the Ecodiesel 1000%. They don't include it cause of "weight" but the Ecodiesel engine nearly identical in weight to the Hemi.