2019-2025 Toyota Corolla add amplifiers to stock stereo tacotunes.com NTUNE6 Line Out Converter

[@brianberson4169]

Skilled and beautiful 😮

[@jjgonz98]

I have a 2022 Toyota Corolla (non factory amplifier). Where did you purchase the T-Harness to hook up to the factory radio??

[@tacotunes]

Here you go: tacotunes.com/product-category/toyota-corolla-audio-products/plug-and-play-wire-harnesses-toyota-corolla-audio-products/

[@jjgonz98]

@@tacotunes also if you use the LC5i PRO can’t you technically get away without purchasing the “Remote Turn-on and 12V harness”? You can just set your LC5i PRO to GTO or audio mode to get signal from the speaker wires that are connected to the head unit and then you just bridge your power wire to one of your amps power wire? You would then still use a blue remote wire from the RMT Out to both amps? That should work correct?

[@tacotunes]

@@jjgonz98 you need the remote turn on . . the LC5i requires the remote turn on / 12V power.

[@jjgonz98]

@@tacotunes the LC5i has GTO mode which allows for signal sensing so when the speaker wires are connected to LC5i terminals, the device will sense signal from the factory radio therefore turning it on. But it also needs a power source so you can connect your power source to one of the amplifiers because your power wire from the amp will be connected to battery anyway therefore giving power to the LOC. So it would make sense that you wouldn’t even need to the remote and 12v harness. Now to get your amps signal you would just use the remote out connections and wire to the amps because you are already getting signal from the speaker wires to the LOC.

[@jjgonz98]

@@tacotunes kzbin.info/www/bejne/qnPNfJule6mGi9Esi=GbVR-Gem_IvO405- This video explains how it works and how to set up but with a LC2i Pro. The LC5i Pro should work the exact same way except just more channels to 2 amps.

[@leomarcos5421]

Would you still use the cross over filter in a component speaker for the front speakers?

[@DANTHETOYOTAMAN]

yes

[@tacotunes]

Yes! Component speaker systems use crossovers to deliver the proper frequency to each speaker.

[@Bwilson-31]

Why is every upload uploaded 2x?

[@tacotunes]

Different LOCs One is our NTUNE6, the other is LC5I pro. :)