2019 GMC Acadia brakes

[@sed6]

Great video! Short and to the point. I've done a million brakes, just not this particular vehicle, so I wanted to make sure there weren't any surprises. All the other videos cover 2013 to 2016, yours is the first 2017 video I could find. Excellent! Like and subbed 👍

[@bk6010]

Same exact situation!

[@scottjeschke7449]

How do you change the rear brakes with the electronic emergency brake? Do you have to disable to emergency brake somehow to be able to push the caliper pistons back in?

[@jlotus100]

Why didn't you replace the rotor?

[@Mr48223]

If that jack ever gave out its gave over for anything in its way

[@bishop7534]

Was thinking the same thing, should had pla ed the tire underneath for added security

[@Mr48223]

Also you can’t do the rear brakes with that tool you have to put it in service mode or you’ll damage the electric brake

[@Officiallyrelly22]

Do you bleed the brakes?

[@Homer19521]

Always use Jack Stands. Always.

[@bishop7534]

One thing for anyone watching, make sure to remove the reservoir cap before attempting to push the pistons back in. This will prevent the blowout of your brake lines

[@leyre4439]

Why have I never thought of putting a bit on my drill to to remove my lug bolts?

[@bhollingsworth]

That’s a cordless impact. Not a drill .

[@kbssat]

Would you know the torque for caliper and its bracket bolt ?

[@johnpiepke6061]

129 for the bracket bolts 47. For the slide pin bolts 140 for the lug nuts

[@xTMNTx1128]

No hate but proper way to compress dual caliper pistons is to push both at the same time or could possibly damage it. Just a future reference.

[@stevek.1979]

Just use a small piece of metal and a C clamp to push your caliper back off.

[@markfranchett9234]

he never mention how to replace the new clips?

[@xTMNTx1128]

The just pop pop out and you can press the new ones in no tool needed just match the clips up

[@dizzerguy8079]

2 ugga dugggas 😂😊

[@davpar36]

You did show me nothing, you do know that truck has a 4 wheel disc brake setup, a waste of time watching this.....