How To: Program Your Own Keyfob For 2018 -2021 GMC Terrain and similar GM Vehicles

[@DougForce]

Amazon Referral Links for GMC compatible key fobs: amzn.to/3qtcjZ7 amzn.to/322i3j5

[@RailfanNetwork]

The stuff these vehicles have nowadays is amazing.

[@DougForce]

@Street Stories It really is. I was expecting it to require additional hardware or tools but everything you need is built into the door and cup holder.

[@marty91902]

Great video, so concise. Easiest thing I've done in a long time. Thank you

[@DougForce]

@marty91902 Glad to hear it made the process easy! Thanks for the note!

[@rubengonzalez5155]

Outstanding information. 👍🏼

[@Manuelgtr74]

I have 1 key fob and i need programming 1 extra, its the same procedure? Thanks

[@DougForce]

@Manuelgtr74 It’s a little more complicated if you only have one, but still possible. Check this link: m.facebook.com/watch/?v=458796258488630&_rdr

[@Manuelgtr74]

@@DougForce thank you for the video and response.....

[@miguelvazquez338]

Oh my lord thank you very much thought the car was broken when it wouldn't start ig I was stuck in program mode

[@DougForce]

I’m glad the video was helpful and you got that issue resolved!!

[@jcampbell191]

Just wondering?? I do not have the push-stop button on my 2018 Silverado Suggestions Thanks Buschman

[@DougForce]

@J Campbell I'm not familar with how the SIlverado does this (great truck, btw!) but I found this video on the topic - see if this helps! kzbin.info/www/bejne/rnfSpYWLlJeXrLM&feature=shares

[@michaelbledsoe2347]

Hey Doug! Will this procedure work with a 2020 GMC Acadia?

[@rickbate2164]

Great job thank you

[@donaldmagee9937]

@DougForce is programming the same if you have (1) working remote? I have a 2019 GMC Denali and when I factory reset by infotainment system the other remote stopped working.

[@DougForce]

@donaldmagee9937 The procedure with just one working key is slightly different - check out this Facebook video for details: facebook.com/share/v/rUjaLBZiKqDTsYHy/?mibextid=w8EBqM

[@jslucasl2498]

I must have messed up during the initial process, now the service theft deterrent system is popping up and I can’t get my truck to start. 2021 GMC Sierra. Any help would be greatly appreciated!

[@DougForce]

@jslucasl2498 I’ve not heard of that happening but you may still be in ‘programming’ mode and you can’t start the car in that mode. Did you hold down the start button for 12 seconds to exit programming mode? It should time out on its own after awhile holding Start 12 seconds should exit that mode. Let me know if that helps.

[@TheJcrandazzo]

Will this work on a 2018 gmc sierra? I have a regular key and no start button.a regular ignition mounted on the column ? Thx

[@DougForce]

@TheJcrandazzo Unfortunately no, if you have a column mounted key ignition these options done work.

[@valdemaroffvaldemar2752]

Скажите пожайлуста,можно программировать использованый ключ от другой машины? Или нужен полностью новый ключ???

[@DougForce]

Yes, you can use an old GMC controller from another car as long as it’s the same model of keyfob. I’ve not done this but I’ve read it dues work. Good luck!

[@valdemaroffvaldemar2752]

@@DougForce Спасибо за ответ!!!

[@michoacanomartinez5971]

🙏🙏🙏🔑 Muchas Gracia por tu video 🥳👍👍👍 Thank you very much for your video and how you explained it🔑🙏🙏🙏

[@DougForce]

@Michoacano Martinez I’m very glad it was helpful to you! Thanks for the comment!

[@Tumblepanda]

My GMC keys has no remote start button when we got it. I wonder if I program a key that has 5buttons will the remote start button will work after I program it? Thanks.

[@DougForce]

@Ronron Monzon That’s a really good question. Remote start has been standard on most GMCs for several years so it’s likely that your vehicle has it. Programming a new key fob with the correct button might well activate it. It’s worth a try!

[@stormrider8166]

Do you have a video of how to program them if you only have one?

[@DougForce]

@storm rider Check this video out - fb.watch/j8XQ8-_hNC/?mibextid=ykz3hl

[@charbelsalloum17]

it s not working on terrain 2024, turning the key counter clockwise in 10 seconds / 5 times is not putting the vehicle in programming mode. should the door be locked and then opened by the key alone? or it will work if we opened the vehicle with the keyfob ?

[@DougForce]

@charbelsalloum17 I believe you have to use the key alone - did you try that?

[@charbelsalloum17]

@@DougForce yes, but the car is not getting into programming mode. any advise ?

[@DougForce]

I have read that some of the newer model cars no longer have the fob programming feature, but that does not seem to apply to this model in 2024. Check this out: www.programyourremote.com/classified/2024-gmc-terrain-keyless-entry-remote-fob-smart-key-programming-instructions-listing-13261.aspx

[@charbelsalloum17]

@@DougForce so if we can recall the steps. the car at first is locked normally by the keyfob, how to open the car by key fob? or by key alone or by pressing the button on the handle ? I think the main issue is in this step.

[@davidgardner49]

I have 3 key fobs and I can't get the key out of any of them no matter how hard I try. Are you pushing on the black buttons on the side? Thanks...David

[@DougForce]

@.David Gardner Yes sir, there is a release button on the side of the fob that must be depressed while pulling the key. If it’s never been removed it can be really stuck in my experience.

[@tinahall2512]

Do I have to have the key and fob all in one? I only have the original separate fob and key

[@DougForce]

@Tina Hall What year vehicle? I believe it does have to be this style keyfob….

[@tinahall2512]

@@DougForce its a 2012 Acadia SLT. I’d prefer to get the fob with key already in it. I see them for sale on eBay for under $20. It states you can program the fob aspect of it, then have someone cut the key for you. If true, that’s GREAT! Not paying $500.00 or more to have a dealership do it. Thank you for replying

[@DougForce]

@Tina Hall It’s probably the same procedure on the Acadia but you might search for videos on that model to be sure. You can definitely get the key fobs fit $20-$40 and then have the key cut at a locksmith. The dealer wanted $350 for this model fob, I spent less than $80 on one from Amazon and having the key cut. Much better!

[@akopyan3346]

Can you explain please what do if I have only one key fob?

[@DougForce]

@Akopyan33 It’s a little more complicated if you only have one, but still possible. Check this link: m.facebook.com/watch/?v=458796258488630&_rdr

[@Boss3corleone3]

How do you auto start for new key fob?

[@DougForce]

@Jefe Corleone Press the door lock button, then quickly press the remote start button and hold….

[@robbiewinns5745]

It didn't work for my 2021 GMCAcdia! I tried three times without success. Could it be the new key fob? I wikk return it to Amazon for anther one

[@DougForce]

@robbiewinns5745 Yes, it absolutely could be the fob. Some fobs work differently- I don’t think all fobs are programmable like the GM fobs require.

[@Strider_LB]

if i have only one keyfob can i do a copy ?

[@DougForce]

@Strider LB You can, check out this video which shows the slightly different process… fb.watch/iJHMpmUMpJ/?mibextid=ykz3hl

[@philsapaden8618]

How do you add the new key fob if you only have 1 key? I lost 1 of my keys.

[@DougForce]

@Phil Sapaden It’s a little more complicated if you only have one key, but still possible. Check this link: m.facebook.com/watch/?v=458796258488630&_rdr

[@karenthurston446]

Do you have to have the new key cut before you can program the fob if you already have one cut?

[@DougForce]

@Karen Thurston You do not have to have the new key cut if you already have one. I just swapped the old metal key into the new fob.

[@karenthurston446]

@@DougForce thank you so much

[@DougForce]

@Karen Thurston Glad to help! I kept the old key fob with the uncut metal key as a backup but if I was to ever carry it again I’d be sure I had the cut metal key with me just in case.

[@timhayes45]

Great video, thanks for sharing : ).

[@DougForce]

@Tim Hayes I’m glad it was helpful! Thanks for the note!

[@timhayes45]

@@DougForce You are most welcome, I will receive my new FOB's today and give it a real try : ).

[@DougForce]

@Tim Hayes Good luck with it! It worked really well in my case. Hope yours does too.

[@timhayes45]

@@DougForce Right on I will know tonight as my FOBs are on the doorstep. I have high hopes looked pretty straight forward.

[@Иван_Иванов]

Good afternoon! Tell me, is such an action algorithm suitable for programming a key for GMC Terrain 2020? How many minutes does the key programming itself take from the moment the start button is pressed?

[@DougForce]

Good morning (here)! Yes, this same process applies to the 2020 Terrain as well. It took just a few seconds for the programming, I’d say 10 seconds or so after hitting the Start button.

[@Иван_Иванов]

@@DougForce Didn't take into account the time difference. Thanks for the answer. I watched your video, but I can't bind the 3rd key. There are 2 staff members. I wanted to bind a 3 key with an autorun button. I bought the key from aliexpress. The frequency is 315 MHz, if the Chinese did not deceive.

[@DougForce]

I’d be suspicious of the third key fob if the second fob was added successfully. It could be a fob battery issue or a defective or incomplete fob duplicate. You might pick up a fob from Amazon or other source to see if that resolves the issue. That way you could return it if not the issue. I have 3 fobs for my Terrain so I’m sure it will accommodate 3 fobs…..

[@Иван_Иванов]

@@DougForce I'll try again to check the purchased 3 key

[@Ching0n79]

What if the key of the only fob I got is not cut?

[@DougForce]

If you only have an uncut key from the fob them you must get the key cut first you by a locksmith or a dealership. Locksmiths are probably cheaper. You must have a cut key to enter programming mode to add new fobs.

[@Ching0n79]

@@DougForce thanks for replying back

[@boujeepineapplezzz]

Ty🎉🎉

[@edschoenstein1893]

I dont get the initial dsiplay

[@DougForce]

@edschoenstein1893 What year is your vehicle?

[@DougCarnegie]

How to put door back together?

[@DougForce]

@Doug Carnegie The cover that was removed? It just snaps back on.

[@chadhood3582]

What if you only have 1 working keyphobe

[@DougForce]

@Chad Hood Check out this video which shows the slightly different process… fb.watch/iJHMpmUMpJ/?mibextid=ykz3hl

[@crubbythebeagle57]

wow great wow

[@DougForce]

@Crubby the Beagle Thanks for checking it out!

[@KimberelyIsaacs]

What if you’re trying to program your key fob and your car goes blank and your push start doesn’t work.. what should i do

[@DougForce]

@Kimberley B I’ve not heard of that happening. I’d suggest checking the car battery to be sure it’s fully charged, as well as the batteries in the fobs. Is this a GMC?

[@KimberelyIsaacs]

@@DougForce my battery is new and my key fob is brand new I think I’m not doing it right and that’s why my car won’t start when I push start

[@KimberelyIsaacs]

It’s back on now thanks

[@DougForce]

@Kimberley B - Did you hold down the Start button for 12 seconds to cancel the programming mode? There is no display or sound during that 12 seconds….

[@DougForce]

@Kimberley B Sounds like you were still in programming mode, glad you figured that out! The process can be finicky but I bet you can get it, just follow each step in detail. Good luck!

[@slawomirstaron3192]

Doesn't working on my GMC Sierra 2018

[@DougForce]

I’ve heard that some keyfobs are not compatible with this process.

[@crea8ivjr]

Dose any one know how to unprogram a key fob

[@DougForce]

@forsakensouls I could be wrong but I believe the car is programmed to recognize the fob, not the other way around. So you don’t clear the fob, you just program the car to accept it. You delete the fob from the car if you no longer want the car to accept it.

[@MariePiazza]

I am sorry to say that this did not work on my 2021 GMC Terrain . I did the first step (emergency key clicked 5 times open door) then the Remote Learning Pending Please wait came on. Timed 10 minutes. When I came back, it was blank. Tried again, nothing. Started the engine, closed the engine, opened the door closed the door, did the 5 clicks w/emergency key did then 10 minutes, same thing. SO I tried again this time sat in the car, and the display went off in 10 seconds. Someone said I need a scan tool and correct software to program a new fob have to go to dealership. Not wanting to do that.

[@DougForce]

@user-ou1ll9qb6s I know that’s frustrating but I don’t think you need to go to dealer. Not sure why you have the results you did but I’m assuming you only have 1 working key? I’d you have two, you don’t have to do the 10 minute wait. Take a look at this video - this is how it should work - kzbin.info/www/bejne/e5m3lJKXeZh9rMksi=Yr4EBAFi8cwx4J35

[@MariePiazza]

I watched it over and over.The vehicle is not doing the same thing. The 2021 terrain should be the same as the 2020 no?@@DougForce

[@DougForce]

Yes, it should be the same. I have not heard of thaat happening before. I'll check around for ideas....

[@warrenmatthews712]

That is not programming the key fob that's programming the key

[@DougForce]

@Warren Matthews Just trying to minimize confusion between referencing the fob and the actual metal key which is stored in the fob.

[@billybob2391]

Couldn’t u just buy a key fob shell and transfer everything over from ur old key

[@DougForce]

@billybob2391 If your old fob works and you have enough spare keys you could absolutely do that. Great option!