2019 Grizzly Tracker 1448 On the water review

[@jamesschexnaider7930]

I got 2018 1448 Tracker Grizzly with 2019 Mercury 25 hp Short Shaft with Stainless prop 11 pitch which I might drop it to a 10 pitch.. Runs fine with one person. If you have two one person must sit toward the front. Trolling motor 12V 48lb minn Kota which works fine in the Louisiana bayous. Easy to handle which is what I love about it and very stable for a 14ft boat. Only dislike is my paint peeled on the back and cap has bubbles. Besides the paint issues the boat has been a pretty good little boat.

[@vikingsmb]

Attach the kill cord to your leg, its there for safety, if it's attached to your leg it will cut the engine if you go overboard and stop it running you down.

[@herewegofans]

Not before you pass through the prop, moving with perpetual motion while still in gear. Still better than under power, but not gonna prevent all injuries. So just be safe and go slow. You will see more and be alive without injuries to tell your pals when you brag about your boat.

[@vikingsmb]

@@herewegofans please watch the video of the accident in padstow 2013

[@herewegofans]

​@vikingsmb run away crafts are very dangerous. Always wear the kill leash as in US it is law. And furthermore, it helps more than it hurts. But you wont escape injury if wearing and unaware while operating. The prop is moving and forward motion will carry the blades clean through bare skin if the two should meet. Cheers fella. Be safe.

[@vikingsmb]

Fully aware buddy and agree When we teach powerboat courses here in the uk we always reinforce the importance of the kill cord 👍

[@augustajtis]

You could attach a small line to the kill switch at the end of your session and pull it when you are done after you crank it up on the trailer. Might avoid a slip if your feet are wet trying to get back in the boat. Thanks for sharing the video.

[@mcbassfishing3995]

Thanks

[@toddhaner5617]

Thanks for showing stability. That is very helpful and not always covered on boats this size.

[@just8625]

Put those batteries up front with tackle and anchors. Smooth riding bro.

[@jasper60103]

Great video and details. I have a 2018 grizzly 1648. I really like it. You're right, that tin can get hot. I bought a floatation seat cushion that I use while driving. Thanks for sharing, bro. Enjoy!

[@mcbassfishing3995]

jasper60103 Thanks

[@milkman5448]

That boat is awesome. It will be my next one. I currently have a little 12’ . I’m a fan of the smaller boats. They get in tight places

[@mcbassfishing3995]

Milk Man Exactly, you took the words right out of my mouth. “I am a fan of the smaller boats, They get in tight places Thanks

[@way75mit9]

Hello MC again for Georgia , This is your buddy Wayne Im still hawg snatching with my Sun Dolphin , But i like your new rig , Also I finally got Power Pole spike kit too, best ad on i ever made, " Good Luck " on the water in your new boat Brother !!!!!

[@mcbassfishing3995]

wayne mitchell What’s up, yes the micro power pole awesome and thanks.

[@jimmielittle877]

Grizzly 1448 might just be the perfect size Jon boat💜

[@fishenfootball]

This is terrific, thanks for posting this. Exactly the sort of things I was hoping to find out about it.

[@mcbassfishing3995]

No Problem and thanks for watching.

[@tmdsynx715]

@@mcbassfishing3995 hey man can you get me a link for your live well please

[@motomax13]

adjust the trim on the motor

[@joeschmoe1301]

This is only place I've found for comprehensive information on the Grizzly 1448.

[@angryshrub1]

Not sure you get what a “no wake zone” is. Appreciate the video.

[@mcbassfishing3995]

Mick R Lol of course.

[@dumduq]

@@mcbassfishing3995 That answer doesn't make sense, you are blatantly breaking the rules, and apparently oblivious.

[@zackburtsche8139]

It was for science.

[@G56AG]

I don't know how many times I've seen videos of boats running around with nobody in them, the operator ended up in the water and wasn't wearing the safety lanyard. Such a basic safety precaution, I can't understand why anyone would want to risk getting run over by their own boat, propellers can do horrible injuries to a human being. I noticed yours hanging unattached.

[@bluelinefishing1985]

I was looking for a comment on this. Huge safety issues. I like the creators boat and his mod ideas etc. I do not like the HUGE and SIMPLE safety issues that are being “taught” or “advertised” here. Like leaving it run on the trailer at the ramp and going to the front. Just shut it off and crank it in the rest of the way!!

[@brianchisnell1548]

Lawyers. Never had those in the good o'l days. Next will be back-up cams and air bags. Haha

[@bluelinefishing1985]

@@brianchisnell1548 it’s pretty simple, don’t leave the “helm” or control of the motor while it’s running. There is plenty of KZbin videos showing why it’s stupid to do so. No need for back up cameras and airbags when all you need is a little common sense. “In the old days” people used to do a lot of things they no longer do.

[@garybelmore1691]

Very Nice rig and Awesome video I own 1442 and 1236 jon boat Grizzly 1448 next 2021 jonboat What I do Recommen before Launching your boat in water Raise your outboard reason for less chance damaging your lower end man you have very nice jon boat good job

[@mcbassfishing3995]

Gary Belmore Thanks

[@sgft3307]

Great video buddy, thinking about picking one up myself.

[@cobrajet8866]

OUTSTANDING VIDYA! The one question about a small jon boat is stability. How much does it lean????? You stood on every corner safely. Thanks.

[@WildBillFlysRC]

Nice set up! you might could move the trim pin down to the forth hole, or more weight in the front. it will ride better, Thanks for sharing!

[@mcbassfishing3995]

Wild Bill Thanks, I definitely agree and I’m working on that.

[@WildBillFlysRC]

MC BassFishing I’ll be doing mine soon... although it’s just a rebuilt 14ft Starcraft with a 25 mercury... fixing the trailer and the bottom of the boat and everything else 😁. Almost done

[@mcbassfishing3995]

Wild Bill Would love to see your finished project.

[@NINO011674]

Thanks for the video I make my decision I'm buying the same boat

[@mcbassfishing3995]

Abraham Solorzano It’s a awesome boat if your looking for Jon Boat.

[@hmoobgb]

Nice boat thinking about getting one pretty soon

[@mcbassfishing3995]

hiku Lor The Grizzly Tracker Boat are great boats.

[@ThePepper5150]

Excellent video I want that same boat you just sold me on it

[@mcbassfishing3995]

ThePepper5150 It’s a one of the best all welded Jon Boats around.

[@WheelsMissing]

Thanks for the review, helped me a lot!

[@mcbassfishing3995]

Live More Thanks for watching.

[@Utoobwatchers]

Adjust your motor trim and get a jack plate. I have a 25 Yamaha on my 1448 and my boat never bounces like that in calm water and I can hit over 30mph

[@delgadokd]

Trimming down will stop that bounce.

[@mcbassfishing3995]

Thanks

[@johncuervo3019]

Will make it faster too. Just moving the pin to a different hole in the back. I see this is months ago though

[@savagele]

@@mcbassfishing3995 Outboard doesn't appear to be trimmed overly up, so a little more weight towards the bow may also stop the porpoising. Does the boat do that when you have the bow mount trolling motor attached?

[@mcbassfishing3995]

@@savagele No sir, when I have all my equipment on I don’t get that issue.

[@peterkeena8667]

Tilt the engine up just a bit when pulling out of the water. Avoid dragging your skeg up the ramp.

[@xdmatt1320]

Add a hydrofoil to the motor that will help with the front end bounce I added one to mine and it made a big difference

[@mcbassfishing3995]

Grizzly-Outdoors Thanks and I’ll definitely look into buying one for my motor.

[@grillPERSON]

Let’s see some shots of the boat on the water with you fishing in it. Like set the camera up on the bank. Good video

[@mcbassfishing3995]

BlacklabBass Thanks I’ll definitely record a video with me fishing and using all my mods.

[@richardbyrd7268]

Great video. Very informative

[@garretporter8158]

Got any new videos you'll be posting? Love to see any more mods you've done and some good shots of the top speed now that the motor should be broken in.

[@mcbassfishing3995]

Garret Porter Sorry Bro, I traded the boat for a Crestliner 1600 Storm.

[@prevost8686]

MC BassFishing Was their a build quality issue with the boat or did you just want a bigger boat?

[@mcbassfishing3995]

Wayne Swicegood I needed a bigger boat for the 2 clubs I fish in with bigger motor up to 40hp. Plus more room for me and my partner

[@charlesfitzgerald3201]

Nice boat ,, I really like the added live well ,,, can you buy that from tracker ? or where

[@65MK]

Nice setup you have. How about some more videos?

[@mcbassfishing3995]

65MK My apology I traded in the boat for a Crestliner 1600 Storm.

[@robbie3731]

@@mcbassfishing3995 Why did you trade it in ?

[@marksimpson5434]

You need to contact tracker and get the specs for mounting your motor. And put a hydra foil on it and it will plain out very fast. Motor should be mounted 1-1/2” AT . You will be very 😄

[@mcbassfishing3995]

Mark Simpson Thanks

[@charlesfitzgerald3201]

does that mean 1-1/2 up on the transom or what

[@driftless1870]

Nice video. I really like those Grizzly Trackers.

[@mcbassfishing3995]

Driftless 1 Thanks

[@joearnold4706]

Real video... subscribed sir

[@mcbassfishing3995]

Joe Arnold Thanks

[@rayharter401]

I have the same boat but 1648. I really like my boat but absolutely hate how far forward the rear bench seat is though, it’s so far from the tiller handle. My shoulder is literally killing me after a few minutes from reaching back so far. Just curious if you have the same issue with your boat ?

[@mcbassfishing3995]

Ray Harter No Sir I haven’t experience that issue.

[@stephenandreae1229]

Were you ever able to get your trim adjusted and eliminate the "propoising"? I'm curios what speeds this boat would hit with a nice plane... My riveted 1448 does 31/32 with a Yamaha F25. I'd rather not lose 20% of my speed.

[@Chiyx9134]

Nice boat!👍

[@mcbassfishing3995]

xader4 Thank you

[@campowers496]

I love the boat you should make more videos on it

[@mcbassfishing3995]

Cam Powers My apology, I traded the boat for a Crestliner 1600 Storm.

[@mcbassfishing3995]

Cam Powers My apology, I traded my boat it for a Crestliner 1600 Storm.

[@Vabasseroutdoors1]

Thanking of buying the same model 👍

[@justinwhite5859]

I add you small jack plate give u little more plan and more speed but it a sweet rig ! Great video

[@John_D2]

trim down and it won't porpoise. nice stability vid.

[@mcbassfishing3995]

Flatzout Thanks and I will look into trimming down.

[@jimmielittle877]

So he just needs to trim down and doesn't need a jack plate?

[@John_D2]

@@jimmielittle877 nope , no jack plate.

[@KevinsNorthernExposure]

I've never locked a trailer in my life....maybe just live in a different area...pin it, yes...but lock it, no.... Always a proud moment to drive your new boat.

[@cambridgepropertymanagemen7612]

Great video this covered everything I have been looking for

[@mcbassfishing3995]

Cambridge Property Management Thanks

[@laingej]

You need to trim it down its porpoising

[@joeschmoe1301]

Great video!!!

[@justinwhite5859]

That jack plate keep you from belly flopping in front to she lay down do what that mercury telling her and pick up even more speed !

[@jimmielittle877]

How much more speed would a jack plate add?

[@justinwhite5859]

@@jimmielittle877 I have a weldbilt 1442 with custom floor jimmy and a 5 inch jack with 3 inches of adjustment with 25hp 2021 Yamaha and it help me tremendously with a extra body in the boat to get out of the hole better !

[@basslurereview2084]

Awesome setup can’t wait to get one

[@mcbassfishing3995]

BassLureReview Thanks, you’ll love this boat.

[@lindadickson9745]

what is the extra box on the floor of your boat? thanks.

[@Vabasseroutdoors1]

Nice! New to your channel

[@mcbassfishing3995]

Vabasser 1 Thanks for watching.

[@Vabasseroutdoors1]

👍

[@btvabowhunter]

I like your videos. Are you going to put out any more video here soon?

[@mcbassfishing3995]

Bryce My apology bro I sold the boat.

[@btvabowhunter]

@@mcbassfishing3995 . Oh man, what happen? Hope everything is good with you. You seem super nice. I wish you the best.

[@MIAFIRE]

You did a great job on the video, I saw one at bass pro and liked it thinking about buying it Thanks for the video

[@mcbassfishing3995]

david mora Thanks and it worth it if your look for that type of Jon Boat.

[@mannymendez7504]

Was thinking of getting same setup how did it feel steering without a normal steering wheel

[@thejuice8076]

How much did you pay for motor and boat and trailer combo I’m looking for one cause I’m a big guy.

[@mcbassfishing3995]

TRAGIC_Phoenix *Leader of Tragic Can’t remember but I financed it around 8k with no money down. Boat, 25hp motor and trailer.

[@thejuice8076]

That’s actually not bad

[@VA_Grandpa]

Did you sell your boat (no further posts)? If so, why? I’m looking at a 2018 1448 this weekend and your the second KZbinr that introduced their new 1448s and then went dark. Thanks!

[@AA-mk4pu]

Where did you get that cooler in the front of the boat?

[@mcbassfishing3995]

Cory Anderson It’s actually a Livewell. I had to order that Livewell from trackermarineparts.com/tracker-parts-finder/ In the comments section you to mention that you want to order part # 182324.

[@BuckcreekTV]

Thanks for the vid man, I'm interested in this boat

[@mcbassfishing3995]

Buck creek Thanks Bro, You will love this boat.

[@BuckcreekTV]

Do you think it would do well with a 20hp rather than a 25?

[@mcbassfishing3995]

Buck creek Yes a 20hp will work and it want go as fast as the 25hp. It also depends on how much weight y’ll be carrying on your boat.

[@BuckcreekTV]

Sounds good man, I'll be looking into one pretty soon thank you for all your help

[@timgoslin3653]

I have grizzly 1448 20 hp might work . I had a 15 on it and was pretty slow. I sold and and got a 25 hp much better for this boat

[@davidmichl6575]

How do two people ride in it? Looking at getting one but i will be duck hunting out of it. Appreciate the help.

[@CYOTsNiper]

Is that a live well on the right?

[@roysuccaw2136]

Have you had any issues with the welds on the boat?

[@bvfilm]

What size is the Shaft length of your motor?

[@mcbassfishing3995]

Bryson Valente Not sure the length but it was a long shaft motor.

[@terencegillespie6675]

Did you lock the hitch to the truck?

[@mcbassfishing3995]

Terence Gillespie Yes sir I do.

[@SniperX-vc9dk]

Is that a live well addition in the boat?

[@mcbassfishing3995]

SniperX 2014 Yes but it’s small.

[@801Outdoors]

Nice setup

[@mcbassfishing3995]

801 Outdoors Thanks you, 801 Outdoors

[@chrispeerman7445]

Good video I think Ima go pick me up 1! I was always wounding If u could stand up on a 14ft I have a 12ft an u cant stand up at all.

[@SunshineMoonshine34]

hey nice review! i know i'm late to the party for this but out of curiosity, how many passengers do you think you could comfortably fit in the the 14' looking into one for duck hunting/fishing and curious what size would be reasonable for my purposes. Thanks!

[@30roundclipazine79]

I have one. 3 men I'm 6'4

[@johnthelonghorn]

Looking at this set up as my first boat. How has it performed for you so far and would you say it’s easy for a newbie to control?

[@mcbassfishing3995]

John Gilani Honestly it’s a durable tough boat, it performed well and very stable for all welded Jon boat.

[@kauaifishing1365]

Nice vids ! I just picked up same boat. How well does it plane with 2 batteries in the back? They wanted to put my battery in the storage container and I’m like no I want that for storage and I want the battery back by the motor.

[@mcbassfishing3995]

Erik Brandsen It does well depending on what weight distribution you have in the front and a I would recommend storing in the front storage to even the weight.

[@JP-fe4ke]

Nice video man, I'm looking at modified v aluminum boats now in the 1448 class . It's probably going to be between the tracker or Alumacraft, Do you have any suggestions? I've currently got a 2005 25hp Merc on a 14ft Zodiac inflatable l run it up here in TN. on the lake. I want an all welded boat too your boat looks like a nice one. Thanks and safe fishing.

[@mcbassfishing3995]

JP8 8 Honestly I can’t say anything about AlumaCraft boat because I never had one but the Grizzly Tracker 1448 all welded John boat is a beast.

[@JP-fe4ke]

@@mcbassfishing3995 Thanks man I'm going out to Bass Pro Shop to look at one . I had my Zodiac fixed once but I need something stronger and dependable.

[@nelsondodds2039]

If you moved some weight (perhaps your batteries) to the front, it’ll quit proposing while on plane.

[@peterkeena8667]

Gas tank too

[@karlz7735]

Love the little live well setup, I cannot seem to find anything like that online, do you have a link?

[@robbie3731]

I ordered one thru my local dealer.

[@tshafa9468]

Proposing is from too much trim up. I would have put the trolling motor on, just in case. JMO

[@mcbassfishing3995]

Tom Shaffa Thanks Tom your absolutely right, I never have that issue with the trolling motor attached.

[@tshafa9468]

@@mcbassfishing3995 Nice rig too !

[@mcbassfishing3995]

Tom Shaffa Thanks

[@Utoobwatchers]

You fish with your legs in between the trolling motor? You must be one flexible person with toothpick legs!

[@erikandrehoglund55]

Is there any drawbacks except the price?

[@Mr64chevy]

I’m moving to Florida next month. Where are some good fresh water fishing spots ?

[@mcbassfishing3995]

ILIKE2FISH What city?

[@Mr64chevy]

MC BassFishing Tampa

[@mcbassfishing3995]

ILIKE2FISH Honestly I’m not sure about the Tampa area because it’s known for inshore / Deep offshore fishing in Tampa. Only thing I could think of is the Hillsborough River. I live in the ORLANDO/Kissimmee are its tons of lake to fish in the are and the noticeable are Harris Chain, Toho and Kissimmee Chain. I also fish a-lot of local lakes in the area because I’m part of a Jon Boat club that fish monthly Tournaments. Orlando Jon Boat Buddies Club Check us out on Facebook or Instagram

[@justinwhite5859]

Sweet rig

[@banejelenko257]

Hi, Mercury is it long or short shaft? Thx

[@mcbassfishing3995]

Long Shaft, That's is recommended for the Tracker Grizzly's

[@jonbesemer1203]

The 14 ' has a 17.5" transom. the longer Grizzly's are 22".

[@Atvsrawsome]

Throw your anchor in the front compartment and it will get rid of that bouncing at high speed.

[@mcbassfishing3995]

Atvsrawsome Thanks

[@Atvsrawsome]

@Phillyfishguy some smaller fishing boats don't have that ability and even if you do move the trim tabs it's still bounces. I had the same problem with my 15 horse, dropped the anchor in the front and solved the problem

[@liamwells7990]

Is this boat go for big waves

[@mcbassfishing3995]

Liam Wellls Yes sir absolutely it can handle big waves.

[@JuniorB.KC41]

It shouldn’t be hopping like that when you’re up on plane on smooth water. Wonder if your motor trimmed up to high when you’re trying get on plane.

[@albertmashburn6030]

trim the motor down it will stop the boat from bouncing

[@dashermike3207]

Neat package. I don't see this particular tracker with that front/side mounted livewell installed on the bass pro website. Did you get this from Bass Pro? just curious.

[@mcbassfishing3995]

Mike Richards I had to order that Livewell from trackermarineparts.com/tracker-parts-finder/ In the comments section you to mention that you want to order part # 182324.

[@nelsonwalters7972]

You need to put the batteries up front to keep from porpusing on plane

[@jeffreyelliott622]

You should have gotten an electric start feature on your Mercury outboard as well and just use you pull start in emergencies !!!

[@chriscarskaddan64]

Great video! I’ll be getting the same set up next week. Have you considered carpeting the deck? Or adding swivel seats?

[@johncuervo3019]

I wish I could find a used hull without the motor. I want this boat but modify the transom for a 40horse jet

[@Josh-vx6lf]

@@johncuervo3019 I just bought this exact same model the 1448. Tracker rates it at 25hp, but if you step up to the 1648 they rate it for 40hp. If you look at the transom on both boats they are identical, I've even verified it in person. So the transom itself should hold 40hp no problem and I will be buying a 40hp tiller for my boat without thinking twice. The only valid issue I've heard someone raise is related to insurance in the event of an accident. My state doesn't require boat insurance and common sense goes a long way on the water. I urge you to go check it out in person at your local bass pro. These boats are built like tanks.

[@johncuervo3019]

@@Josh-vx6lf aluminum thickeness

[@Josh-vx6lf]

@@johncuervo3019 The aluminum is all the same .100" thick on both models. Go look at them in person if you don't believe me, the transom is 100% identical.

[@johncuervo3019]

@@Josh-vx6lf okay, I believe you. I tried to look on their website before commenting that but they didn't list it like others do. I remember others being slightly different gauge as they jumped up

[@frankw2328]

Nice 👍

[@mcbassfishing3995]

Frank Williams Thanks

[@christianlopez7425]

When you buy that boat does it come with the trailer

[@Atvsrawsome]

Some places might package deal but you will have to pay extra.

[@crystalrios6706]

Bass Pro has it for $4900 with a trailer in Texas. Motor is sold separate

[@leaveorlibertyfishing7670]

I had a very similar setup pull that prop off and get yourself a 4 blade spitfire in an 11 pitch and I promise you’ll love the night and day difference.

[@mcbassfishing3995]

Thanks

[@joeyjoe8892]

Dude I got same boat 1448 grizzly with 20 hp 4stroke merc with grab bar and extension pole im doing 25 you'll do 30 with that set up

[@mcbassfishing3995]

Joey Joe Thanks

[@kauaifishing1365]

Do you have a long shaft or short shaft motor?

[@mcbassfishing3995]

Erik Brandsen Long shaft, Bass Tracker recommends a long shaft for the 1448 Grizzlies Tracker.

[@kauaifishing1365]

Have you had any performance issues with long shaft? Some videos I’ve seen guys running short shafts. 2020 1448 has a 17.5” transom which is in the middle or both shaft recommendation

[@mcbassfishing3995]

Erik Brandsen No performance issue, but was told several times that if I lift the motor about 2 inches I would get a couple mph faster. I notice my cavitation plate was below the bottom hull of my boat.

[@gavincopple9206]

What size shaft?

[@mcbassfishing3995]

gavin copple It’s the Long shaft outboard.

[@lowtechredneck]

did you leave the truck on the boat ramp?

[@TennesseeOffGrid1]

Where can I find a live well like that

[@robbie3731]

I ordered one thru my local dealer.

[@patrickcotter945]

Great review! I'm looking at this boat but worried it wont handle well in big brackish rivers with a chop.

[@mcbassfishing3995]

Patrick Cotter The boat is solid and built like a tank. One thing I can say is that the Tracker Grizzly will hold its own. I’ve been in extremely rough lakes with 20mph wind about 3 foot waves and the boat handle well.

[@dumduq]

im more worried about theft at home than at the ramp

[@MichaelMoore-pv3rt]

Why so much bounce at full throttle? That water is glass

[@mcbassfishing3995]

Michael Moore Because I didn’t trim down the motor and the majority of the weight was on the back of the boat.

[@richarddegen6184]

new guy, not educated at trimming motor

[@steveaycock4853]

Thanks for blocking the boat ramp!

[@mcbassfishing3995]

Steve Aycock Your welcome

[@TNsher776]

The motor is trimmed way too much up! That's why the front of the boat is bouncing out of the water like that

[@jimwilkey7294]

Everything looks great except that Government Motors Chevy Colorado towing it!

[@countryfriedent]

What truck do you suggest?

[@fernandomatos4098]

Cuanto cuesta bote de14 ft sin motor yremorque

[@robertmcdonald690]

Your motor is not set right that's why it's bucking let your motor down some