2019 lifted nissan titan walk around

[@raiderjedi4160]

Before and after pics are legit, I love being able to see both on the same screen.

[@JeepTrailsandBarbells]

I know what you mean, it allows you to really get a good look of just how much of a difference it makes.

[@canamxmr4760]

They look good! I just got a 21 Titan with the Rocky Ridge K2 package. I don’t know why I never considered the Titan before. It has to be one of the most overlooked and under rated trucks. Coming from a Toyota I couldn’t be happier. Fit and finish in mine is top notch, great ride, quiet, plenty of storage, and probably the most comfortable seats and driving position of any truck I’ve been in. Most importantly, it has a unmolested V8 (no start stop/AFM/DFM/MDS etc). I’ve had Rams, F-150s, Silverados, Sierras (including a black widow edition), Tundras, and a Tacoma. The Titan is probably my favorite and I never even considered it until my wife wanted to take a look at one

[@JeepTrailsandBarbells]

Man i couldn't have said it better myself, i love the Titans and feel they are over looked big time. And like you said they are the only trucks that dont have all that start stop bs on them. Just raw power and the ride is incredibly smooth.

[@canamxmr4760]

@@JeepTrailsandBarbells are there any mods you would recommend? I just got some smart liner floor mats, flowfx catback, LEDs, tint, and a stubby antenna. Any common issues I should keep an eye out for etc?

[@JeepTrailsandBarbells]

@CanAMXMR honestly not really, the truck is damn near perfect. Just keep a eye on the fan. Our fan clutch got replaced for a defect. But other then that it never had any issues at all.

[@canamxmr4760]

@@JeepTrailsandBarbells 10/4. Thanks bud!

[@JeepTrailsandBarbells]

@CanAMXMR you are welcome thank you for the comments.

[@joshc606]

Finally someone working on these trucks! Good to be different

[@JeepTrailsandBarbells]

Yes sir, i also have planes to cut out part of the fire wall and re weld it up to fit 37s without going with a bigger lift

[@HardEnduro8]

Awesome man. Both trucks are nice. Can’t wait for all my parts to come in.

[@JeepTrailsandBarbells]

Thank you sir, and yeah you will have a really nice rig when its all done for sure.

[@bc_usa]

You should start a business making custom racks..I would definitely buy one for my Titan. Looks good and very useful.

[@JeepTrailsandBarbells]

Thank you sir, i try my best to make everything look Profesional but also extremely functional as well. I would like to make and sell them but i have a full time job plus a small furniture business i do on the side as well so i wouldn't have time to do it all 😔

[@ManuelVasquez-v3b]

I have a 2019 to 😊 push button start 😊

[@JeepTrailsandBarbells]

I wish I still had mine, it was an amazing truck.

[@SuperKris50]

Nice trucks man! Just curious, what made you pick Nissan Titan over the other brands? Ive been eyeing these myself and just curious whatever feedback you got!

[@JeepTrailsandBarbells]

The deal i got, the titan has 390 HP and 401 torque. So it had the power just not the best on gas, it also has a 110 outlet built on DC converter so i didnt have to put one in myself. And i was able to get the 6 year warranty for free. I have owned dodge, ford, jeep, and a few others but the titan just handles so well. And there isnt as many on the road lifted and rigged out so you stand out a little more. They also have a 1950 pay load one of the highest in its class and a a 9,600 towing rate.

[@brandon_buildsDIY]

That frontier is amazing

[@JeepTrailsandBarbells]

Yes sir it is, i no longer own the titans. I had to trade them in due to lack of work from covid, so i now have another frontier i shall be setting up once again 😌

[@xc_4x4]

Here's my issue, I had a 2014 RAM that I gave to my dad cuz I he loved it so much. Rams have huge wheel wells so I was able to fit 37" muds when I just had a 2" body lift, Yea It rubbed like crazy but not a big deal. Eventually I upgraded to a sixer but with RAM you can get away with a 4" lift to clear 37's and with nissan you had to cut all that in order to fit 35's ON TOP of a 6" lift!? It was either Ford or Nissan this time around but with all that cutting needed I might just go with Ford. Sux cuz I keep eyeing these Titans man🤷🏽‍♂️ Pluuuss idk If I can really buy anything other than an American Brand. Your trucks are awesome tho🇺🇸🤘🏽

[@JeepTrailsandBarbells]

Thank you sir, and yeah it is a down side for sure having to trim out stuff. But how i look at it is, if its my truck i want it to be how i want it so if i have to cut some stuff out 🤷‍♂️ just makes it more of a one of a kind. But i get your point of view and dont blame you at all for not wanting to deal with that. I am going to cut part of the fire wall out and remove the pinch weld later on to fit 37s myself i see the flaws in the truck but i can fab it myself so im not really concerned with it. But wish i didnt have to though. Best of luck with whatever truck you go with buddy and when you do get it, hit me up and let me know what you went with. All so the titan was designed and build in the US 😁

[@xc_4x4]

@@JeepTrailsandBarbells yea see I'm not skilled at all in that respect so all my mods will have to be done by a pro meaning money spent lol. So kudos to you sir! It's funny how more foreign trucks are built here than domestic brands 🤦🏽‍♂️ dam shame. I love making my vehicles unique also so I cant blame you. I'll send those pics as soon as I make that decision bro till then enjoy and stay safe 🇺🇸🇺🇸🇺🇸

[@JeepTrailsandBarbells]

@@xc_4x4 i understand completely, and sad thing is most "custom" off road shops are really just installers. If someone doesn't make a kit for it they cant do or wont. I have been told many time when i had my frontier "we cant" "its not doable" and blah blah blah so i just do it all myself now.

[@bc_usa]

Just so you know these Titans are made in Minnesota. USA. And Toyota has a plant in Texas. So technically you are buying a truck made in America by Americans.

[@JeepTrailsandBarbells]

@@bc_usa yeah so many people dont know that, but even still i was like that when i was younger about American made things. But 3 kids will get you looking at the price tag over brand name 🤣🤣

[@stihlgotit405]

Nice silver Titan bro !where can I find that decal on the silver Titan.

[@JeepTrailsandBarbells]

If you are referring to the flag my wife use to make them. And thank you for the kind words

[@stihlgotit405]

Nice brother, I have a xd silver diesel, that decal looks so nice on fender!

[@JeepTrailsandBarbells]

@@stihlgotit405 thank you sir. And i love the XDs as well really nice trucks

[@HardHeadMilitary]

Ok buddy All locked and loaded, finding wheels was a nightmare 6” rc, 22x12 -44 gear offroad ratios in chrome, putting the rc ds2 steps all on the 28th in Manvel, new speakers tomorrow and katzkin on friday Going 33 but i think when i need to upgrade the tires ill go up to 35

[@JeepTrailsandBarbells]

Thats awesome buddy! Im really happy you got it all lined out. And finding the right rim never seams to be a easy task 🤣 Running the 33s will be good for your job, but i think you will start itching for 35s before they are needed 🤣🤣 also a 22x12 is a crazy wide rim, that is going to look good from the rear with that flared out rubbed. Keep me posted as you get it all done i would love to see the end results.

[@HardHeadMilitary]

@@JeepTrailsandBarbells i for sure will jeston! I appreciate all your help and guiding me to glenn in manvel. Im super excited buddy!

[@JeepTrailsandBarbells]

@@HardHeadMilitary you are welcome and glad i was able to help.

[@HardHeadMilitary]

@@JeepTrailsandBarbells man you really did

[@gatorglenn2892]

Your Frontier was sick. What front bumper was that? I had a 04 Titan, loved it. Looking to get another soon.

[@JeepTrailsandBarbells]

So the one on my wifes titan was a coastal off road but it was for the XD not the SV so i had to fabricate it. as for my frontier i built that from scratch 100% custom in the driveway with just a 3/16 plate of steel and a 110 welder with a grinder. I now have another frontier and will be decking it all out once again lol. All in due time i will build it back up.

[@gatorglenn2892]

@@JeepTrailsandBarbells Thanks, I have a 2017 SV 4x4 Frontier and going with a AllDogs heavy 2” lift kit. Those guys drive Nissan and Engineer products for them. Check them out.

[@JeepTrailsandBarbells]

@@gatorglenn2892 yeah i have seen they have damn good stuff, but as for my 2019 LS frontier i shall be doing a titan swap on it with a 1 inch body so i can run 35s will also be re doing all the gears as well. But it will all be on hold until i start working over time and get my bills in order.

[@kaseyod113]

Looks great man! Awesome vision and work! Have any videos of those discount tires taking you off road?

[@JeepTrailsandBarbells]

Watch "2019 nissan titan got stuck in clay" on KZbin kzbin.info/www/bejne/bmetlauJpJKkbM0

[@JeepTrailsandBarbells]

This was the only recording we have of the truck in use, but the tires did good.

[@kaseyod113]

@@JeepTrailsandBarbells great vid. Thanks 🙏

[@JeepTrailsandBarbells]

@@kaseyod113 you are welcome, thank you for watching. 😌

[@watchmanexpert]

Question did u have issue with wheel bearings for the offset ??? I try fit 22 wheels with 33 tires and -50 offset ..... I have 2 inch lift but I believe is no enough I will need cut more metal ... i and running 2 inch spacer now

[@JeepTrailsandBarbells]

No i do not we even tow a RV with them through the back country camping. We have yet to have a problem. I removes the ones off my black truck because the back spacing spacing was enough and put a 1/4 on instead just to clear the breaks.

[@parkermunday]

Hey! Could I get the website link for “Titan accessories” in Michigan? 3:28

[@JeepTrailsandBarbells]

Wheel Spacers Titan Wheel Accessories www.titanwheelaccessories.com/collections/wheel-spacers

[@JeepTrailsandBarbells]

They have tons of them

[@Khaled-tx5xj]

Are the aftermarket brands only offering 6 inch lifts for the new Titans ?

[@JeepTrailsandBarbells]

No there is one out called bullet proof that offers a 10" to 12" but they start at 6 grand and go up to 10k. What i dont like is the pinch weld and fire wall gets in the way of bigger tiers, so i got a 6" with 35s but im going to cut out part of the fire wall and re weld it up so i can fit 37s without going bigger on the lift.

[@Khaled-tx5xj]

Jeston Hickle totally agree the pinch welds are pain in the ass with these full size trucks . By the way I’ve recently purchased the 2019 Titan and I’m planning on going the same route as you did . My concern is the Overall Cab height . I’ve got a 84 inch garage entry height . May you please measure them if you don’t mind 👍🏻

[@JeepTrailsandBarbells]

@@Khaled-tx5xj 82 inches tall, also dont do what i did and get 4 inch back spacing then put spacer on your truck i sliced my tires on the pinch weld bad. If you keep your stocked rims go with 2 inch billet aluminum, if you get rims make sure it will clear the break caliper. I put 18s on mine i dont like 20s for off roading not enough rubber to rim, but just a heads up if you do go with 18s. Once i i need tires and go up to 37s im going to cut that pinch weld and fix it how they should have done it to begin with and ill make a video of that to.

[@Khaled-tx5xj]

Jeston Hickle gotcha thank you man 👍🏻 appreciate it

[@JeepTrailsandBarbells]

@@Khaled-tx5xj you bet buddy

[@ericbrown9201]

Nice Titans bro! You going to make some off road vids? Like to see those in action!

[@JeepTrailsandBarbells]

We are going off roading today so i should have a video up today or tomorrow.

[@adamhaynes4376]

What’re y’all getting for MPG with the 6in and 35s? I have a 3 inch lift but am wanting a 6in.

[@JeepTrailsandBarbells]

So the bigger tires threw the odometer off by 1/10s so every 100 miles you go its really 110 miles instead. But i was getting 290 to 305 to the tank and now it reads about 250 but really its 270ish so a 24 gallon tank ran down to 22 gallons before the lift it was around 13 to 14 mpg after its around 11 to 12. They suck so bad on gas but i love them

[@bigmacfamily0098]

@@JeepTrailsandBarbells hey man ever any problems with the truck? I have the same im not 4x4. I want to lift it so bad but am always worried about the warranty!! Nice set up man!!

[@JeepTrailsandBarbells]

@@bigmacfamily0098 no issues as all, plus nissan and RC have a partnership. If you have the dealer install the lift it wont void your warranty. Even if you do it yourself it only voids the suspension nothing else.

[@adirondacksxss9156]

@@JeepTrailsandBarbells i was told today when i ordered my icon lift through dealer that thats even covered under warranty but time will tell if its true

[@JeepTrailsandBarbells]

@@adirondacksxss9156 well thats good to know, glad it wont void it.

[@emmanuelcisneros5486]

I have a 2020 Nissan Titan pro4x with 6” RC and 35x12.50r18 stock rims and 2” spacer. But I get a vibration when doing 60-80 mph. Do you ever had that happened

[@JeepTrailsandBarbells]

No sir i never had that issue. You might want to try to get your wheels re balanced, it can happen sometimes after a few hundred miles. Also check your tire pressure, alot of people over inflate them and can cause the tire to chop. If it isnt that i would start to thing its a drive shafts balancing issue or bad bushing. Maybe change out to urethane bushing.

[@JeepTrailsandBarbells]

Who did your lift? The dealer, shop, or yourself?

[@adirondacksxss9156]

did you get hub centric spacers if not and those weren’t centered properly that could give you a vibration

[@BC-hc5dq]

Titan 🤑👍

[@HardHeadMilitary]

I just purchased a 2019 sv 4x4... I got a tip top deal with under 17k miles on it. Does the rough country lift void your warranty?

[@JeepTrailsandBarbells]

No sir, nissan has a deal with RC. The dealer can install it for you, they even sell them now with the lifts. If you do it yourself i dont know if they will warranty the parts you replace. But i know if they install it they will still cover it. That is what the dealer that i bought mine from told me, so call your local nissan dealer and ask just to make sure nothing has changed. I did the lifts myself, but i was also willing to do all my own work if they did not cover it from me doing it myself. But they said they would, again call around a few dealers to verify as its been almost a year since i talked to them about it.

[@HardHeadMilitary]

@@JeepTrailsandBarbells im going to give them a shout today. Thanks buddy!

[@JeepTrailsandBarbells]

@@HardHeadMilitary you are welcome, hope it works out for you.

[@HardHeadMilitary]

@@JeepTrailsandBarbells ive called a couple of dealers here in the houston area, and no luck. I know icon has a bolt on kit but its $2200 for a 3” lift. I think id just go with rough country and i prefer to go 6”. I will keep calling

[@JeepTrailsandBarbells]

@@HardHeadMilitary i went to the clear lake nissan off of 45 and 96 by the toyota dealer. They told me that it wouldn't void anything, and if it did it would just be the suspension that was voided nothing else. Try giving them a call, they would have installed it for me to but i did it myself to save money.

[@danielk0106]

What did you do use to get rid of the badges on the sides?

[@JeepTrailsandBarbells]

I still had them on there, the black one was just blacked out. But i belive they are held on by some sort of glue or adhesive, so i think a heat gun should work on popping them off. But dont take my word for it, i would call a local body shop and ask them. Most the time they will help you out with tips.

[@JeepTrailsandBarbells]

Watch "How To De-badge a Vehicle" on KZbin kzbin.info/www/bejne/a6TEf4NtmMl5mc0

[@JeepTrailsandBarbells]

Yeah a heat gun and fishing line, watch that it should help get you what your looking for.

[@danielk0106]

@@JeepTrailsandBarbells The engine badge? I don't see it on your truck? Mine has it and it will leave it looking like crap if I take it off. They said some 2019's didn't have the Engine badge. I'll have to black mine out. The letters are no problem. I've de-badged in the past. I'll use this. www.dipyourcar.com/collections/hyperdip/products/hyperdip-emblem-badges-kit?variant=31572436811859

[@JeepTrailsandBarbells]

@@danielk0106 the one on the grill is still there to, it was also just blacked out so it is hard to see. Im sure you can buy after market grills without them though.

[@MrGerrard8199]

Did you install this yourself?

[@JeepTrailsandBarbells]

I sure did.

[@MrGerrard8199]

Jeston Hickle I have a 2019 midnight too. Was wonder if I could do myself too. Scary. Thanks.

[@JeepTrailsandBarbells]

@@MrGerrard8199 yeah its pretty straight forward the instructions are pretty easy to follow. Do you have any Experience working IFS?

[@JeepTrailsandBarbells]

@@MrGerrard8199 your going to need 2 6 ton jacks to have it up high enough to work on, then a 3 ton or bigger floor jack, the hub nut or also know cv axle nut is a 32mm. doing the rear end it helps to have someone help with the jacks and lining it up after the blocks go in. If you have never done it before give yourself 2 or 3 days to get it all done. You have to also cut out part of your trucks cross member mount for the front diff. It have a temple with the instructions.

[@MrGerrard8199]

I put a 3 in lift on a 72 Jeep Cherokee I thought it would be the death of me. As for IFS. No!!! Lol. Nissan Titan look so better lifted. You looks great. Just what I want. Like the tire wheel combo!!!

[@king0dasouf]

Spacers? Not for me…..

[@JeepTrailsandBarbells]

Yeah the wheel was the wrong one for my truck, but that was 100% on me for not dry fitting them first before i mounted the rim. I ended up taking the ones off the black truck down to a 1/4 just to clear the break caliper. The silver truck didnt have the proper back spacing from the oem rims so that is the reason for them. But i would have preferred not to have any at all. It was a temporary fix.

[@king0dasouf]

@@JeepTrailsandBarbells I’m kinda bummed out no one really does a mid or long travel system. I’d like a system where the a arms are an inch or so longer. That way you can get more travel and lift without the driveshafts binding up. End up with 4 inches lift up front with 12-14 inches of travel. Have a 2 inch taller leaf pack on a 1 inch riser and a 2 link. Kit out a Harop supercharger and a built tranny. It would eat the new TRX and the Raptor for lunch.

[@JeepTrailsandBarbells]

@@king0dasouf i agree with you, it would be really nice if somebody made one. With a IFS the biggest issue people would run into is having to make longer CV axle shafts to fit the longer control arms along with ,tire rods, and struts. I think most manufacturers are worried about liability issues. Regardless of the reason no one has made one, i think it would a sight to see.

[@king0dasouf]

@@JeepTrailsandBarbells Dirt king has a setup for the regular Titan but not the xd.

[@JeepTrailsandBarbells]

@@king0dasouf yeah it's normally the other way it's all about the XD and no regular titan stuff