2019 Ram OEM Rain Guard Install Video

[@onekoneb]

Thank you!!! Same process for my 2021. With your guidance, I got it done way easier than if I had tried on my own 😂

[@TonyTheTruckGuy]

Glad it helped!

[@bethreilly347]

People like you are the reason i never read instructions anymore. Thank You for making a great video that will help many.

[@TonyTheTruckGuy]

Glad it helped you out!

[@mi_man_kc]

Tony.... just wanted to swing y and say great job. I'm one of the engineers for the company that supplies these parts to FCA... I'm glad to know that people are able to figure these out... and all of your little hiccups that you had, we had with explaining and directing FCA on how to do it all. Either way... great job all around... I probably would have been a little weary regarding installing them outside with it being as chilly as it was... with the in-channels, they do have the possibility of snapping in colder temps. Other than that? Rock on!

[@TonyTheTruckGuy]

Haha yes, it’s always a little scary doing this in the cold, but didn’t have much choice since I had no access to a heated garage. I believe I installed the rear visor clips a bit different than the directions state, but that made it easier and I haven’t had any issues. Thanks!

[@bhelbling18]

You mentioned window tint. Is there an issue installing these with tint on the windows?

[@mi_man_kc]

@@bhelbling18 There shouldn't be... tint is located on the inside of the windows, while these visors sit on the outside of the windows.

[@kengray4448]

Great job on install for in channel visors, considering time of year, did this on 2003, 2012, and present

[@nightmateus1014]

Thank You!!! You addressed the exact problems I was having yesterday attempting installation. Looking forward to success today. I appreciate your time and directions.

[@donaldstagnone3652]

Thanks a lot for Instructional video,Putting mine on tomorrow.I got Weather tech rain guards as x-mas gift.

[@harjeetsandhu5489]

Thank you! With the help of your video it was a breeze.

[@2Quietus]

You hit exactly the problem I had with my weathertechs. To allieviate the problem, you have to pull the window seals out and cut the pinch seal at the tops of each window to allow the extra room so the window safety doesn't engage (this is on the weathertech vid channel telling you to do this). The downside of that, is now you MUST keep an in-channel visor in the windows or have a wind-whistle because the extra room made from the visor install.

[@TonyTheTruckGuy]

Yeah, I noticed even without cutting anything, just having the in-channel vents added a fair amount of wind noise. Usually I have the radio going anyways though so it never bothered me.

[@brownmonkey9846]

Thanks! This was helpful. For anyone doing the clips, they go in very easy if you push the clip up to the visor, line up the pin and smooth gentle/firm press. Pops right in. Also, if you mess it up, you can back the pins out.

[@eliseosawyer6132]

instablaster...

[@TheTaxreliever]

Thanks again for the video.....I just purchased these and am going to use your video to help me (a non-mechanical individual) throw these on...I noticed that they sell two kinds, one that slips in the door like yours (waaaay better) and the ones that appear to stick on the actual outside of the door.

[@edclark7021]

Great video. I watched it before I bought these today, and installed them in about as much time as it took to watch your video. The back ones were super easy thanks to this vid. Thanks for making it!

[@TonyTheTruckGuy]

Glad I could help!

[@bchboy1206]

Thanks, I was rather daunted at first and you made it easy peezy!!

[@beauford54]

Thank you!! Very helpful!

[@TonyTheTruckGuy]

@@beauford54 Glad I could help!

[@trueboxingkings3721]

I was about to pay $75 tomorrow to get mine installed. Fuck that, you just saved me money. That deserves at least a thumbs up and a sub. Thanks man, very helpful.

[@TonyTheTruckGuy]

Sorry for the late reply, 300+ comments were "being held for review" for some reason. Thank you!

[@LDeol]

How did you get the hardware in for the rear visors?

[@chrisabreedapartnyhc5337]

Thanks for the vid.!!Just installed mine,I had weather techs on a previous vehicle so I knew the deal with the fronts but I probably would have taken me forever to figure out the rears

[@travisgoodwin33]

Your video helped me out a lot. 👍🏾💯

[@TonyTheTruckGuy]

Glad I could help!

[@bigluvintony3]

Thanks!

[@donearl6675]

you dont realize how much you helped us...thank you👍👍👌!!!! im going to save and share this with others😉

[@Amxracer]

Cool 😎 !

[@Natedawg6996]

Thank you so much this video helped me a lot 😂

[@mr.aey3]

Just got the same ones. At the dealer they wanted to charge me $86 to install them...what a joke Thanks for the video

[@EasternElectric2012]

Why is that a joke? If you are in the dealership how much would you charge?

[@mr.aey3]

@@EasternElectric2012 Not $86

[@marshallfox1786]

That’s why they call them Stealerships.

[@bertkelly7650]

I didn't use those clips on the rear door. I found the adhesive is strong enough to hold them in place. Yeah, I thought I'd break the front ones.

[@prisonwallet]

Awesome video. Exactly what i was looking for thanks!

[@victorhobson5078]

Thanks for the video. Not a fan of how thick the edges are. Wish weather tech would hurry up and make some

[@kengray4448]

Winter is not time to install visors

[@TonyTheTruckGuy]

Nope, but it worked.

[@ebeatsz]

They didn’t give you any spacers?

[@TonyTheTruckGuy]

Just whatever was seen/used in the video. It’s possible they made some changes to the visors since this video, though.

[@Bennettj85]

I just got these too but I did it like you and like the instructions but it seems that the seal that runs down to the door handle sticks out a bit under the deflector so what keeps water from going into that seal since it don't set on the window a inch under the deflector. It almost looks like it should stick behind the b piller so the seal doesn't bow out for water entry. Just my thought.

[@TonyTheTruckGuy]

Yes the clips I installed are technically supposed to get into the higher groove of the seal, but I've had other people tell me that you basically have to remove the door seal for that which was a total pain for them. I haven't had any issues so far this way and nothing is loose.

[@alexmaldonado7521]

Thank you your video helped out the most of any others ready to tackle mine tommarriw easy peezy.....please give me an update 8f how they operate now.....im worried about my tint.

[@TonyTheTruckGuy]

I have a very small hairline crack in the back corner of the drivers window vent somehow but it’s all holding together fine and I haven’t had any issues with my window tint. I think something hit the vent which caused the small crack but it’s been that way for over a year now and still hanging in there.

[@alexmaldonado7521]

@@TonyTheTruckGuy awesome man thanks for the update

[@fredeg894]

Long shot here. But the front is that how they go in ? The bottom part (by the mirror) sticking out like that ?

[@TonyTheTruckGuy]

Exactly as shown here

[@fredeg894]

Thanks for the reply . I was actually installing these yesterday on my 3500 and took them off because that bottom part was sticking out . Guess il put them on again today .

[@TonyTheTruckGuy]

@@fredeg894 Yeah, I mean the one part goes into the channel, but the "visor" continues vertically down and does stick out slightly as it makes contact with the window trim.

[@xxsubkilodosxx7594]

Just installed the exact ones on my 19’ ram.. within a week scratches all over my glass on top from them rubbing the hard plastic... Watched your video over and over again wondering if I did something wrong. But them are idiot proof only one way in.. Hope your experience with them has been better.. But as for out here in West Texas they suck! To much caliche dust.

[@TonyTheTruckGuy]

Sorry for the late reply, 300+ comments were "being held for review" for some reason. Yeah the dust probably doesn't help. Dirt and grime get in mine from time to time and I have to wipe the door seal with my fingers.

[@bossstrick]

There seems to be a fairly large protrusion of the outside window seal on the fronts , right behind the mirrors where the front of the visor goes down in the channel. Is this common? I don’t like it because I’m sure water will now get down inside the door where all the electric mechanisms are for window operation . Any thoughts?

[@TonyTheTruckGuy]

I’m not sure of the issue you’re speaking of, mine seemed to sit flush without any problems. Is everything fully seated?

[@bossstrick]

Maybe I didn’t get them started correctly right behind the mirror then working towards the back. The backs are a pain in the ass but they’re good to go

[@TonyTheTruckGuy]

@@bossstrick I’m wondering if you’re getting stuck on the 2nd seal lip around the 3:45 mark that I point out. There have been a few other questions asking about a gap in the same area, but without pictures, I’m not sure exactly where the problem area is. I did end up having to take out my visor and plop it back in as mentioned in the video, but around the 5:00 you get a decent shot at what it SHOULD look like

[@bossstrick]

Oh geez I was putting that flared end by the mirror in instead of leaving Ty facing out . Thanks for your help Tony !!

[@TonyTheTruckGuy]

@@bossstrick Haha hey well I’m glad it was an easy fix and you got it figured out!

[@thomashenderson603]

I just a got a new ram also, on your drivers seat, the round bottom -- if you push it side to side it lower and increases lumbar in the seat.. what does the up and down do.. mind does not seem to do anything

[@TonyTheTruckGuy]

I guess I haven't really played with mine. I figured maybe it moves the lumbar up and down or has another lumbar adjustment higher or lower. I'll check it out and get back to you.

[@TonyTheTruckGuy]

I just checked mine and confirmed that the up/down on the round button raises and lowers the lumbar lump. It’s a little hard to tell, but if you adjust the lumbar all the way out and all the way down, then push up, you can feel it working towards the middle of your back.

[@juanmoralesgonzalez8970]

They look great, but the company is ridiculous 90 dollars of shipping to Georgia 😂plus 95 for the visors

[@TonyTheTruckGuy]

That’s about the going rate for these visors from any vendor. Even the Weathertech are $110 plus shipping.

[@joallen0001]

My rears didn’t come with adhesive. Just the clips.... I can see where they might scratch

[@TonyTheTruckGuy]

It doesn't do much anyway haha. It wasn't very sticky and it has to stick to like a felt surface which won't stick well.

[@clintbougher4428]

Did you do the weathertech video yet ?

[@jaredchampagne2752]

I figured being an OEM part that these would be an easy and straight forward install, but they’re a hassle and just not worth the time, I ended up just throwing them out from frustration. They must outsource these from a Chinese company and brand them Mopar.

[@TonyTheTruckGuy]

😂😂😂 The fronts are pretty easy. The rears are a bit annoying.

[@jeremyshoemaker4760]

Hi guys I have these on my 2019 ram came when I bought the truck 2 years ago after Christmas last year my window was smashed when I woke up for work one morning. Got it replaced and just a few days ago we were at the Memorial Day parade and the window was down and it shattered again. Sounded like a gun shot. The window installer is saying it is from these in channel ram visors say it’s hitting the metal clip. Anyone else having this issue?

[@TonyTheTruckGuy]

I’ll have to let others chime in, but I personally never had any issues with the window breaking the visor. I would recommend though that if you leave the windows down for a few hours, I’d roll the window back up slower because the in channel style can come slightly unseated. Of that happens and the window is coming up full force, I could see that being an issue, but I wonder if they were installed correctly.

[@harpreetsingh2084]

Thanks

[@victorle5088]

Hi tony, i have a 21 limited and trying to get rid of whistle noise from the window. does it help to reduce the wind noise? any negative effects?

[@TonyTheTruckGuy]

These vents actually crates slightly more wind noise than without them since they are in-channel style. But mine never had a whistle before installing them so I’m wondering if your door isn’t adjusted correctly or something. The little added wind noise doesn’t bother me because I always have the radio going or something

[@69boobee]

How come it says these are unavailable? I seen the same exact ones on ebay and dude tells me Chrysler doesnt make in channel? I dont care who makes them just want ones like these w/ the ram logo

[@TonyTheTruckGuy]

Maybe my link is just broken or that seller no longer has them. Here’s what looks to be the same ones as mine for a crew cab. They also have quad cab available - store.mopar.com/accessories/2019-ram-1500_all_new_-exterior_accessories-side_window_air_deflector/side_window_air_deflectors_crew_cab_82215478.html

[@69boobee]

Are these for ds or dt? I have a 2019 ram 1500 laramie crew cab. New body style. Weathertech doesnt even make them for my model

[@TonyTheTruckGuy]

New body style DT. I’m actually pretty surprised weather tech is sleeping on making these.

[@jonathanchou5998]

It’s been one year after you installed it. Any issues so far? Auto window working properly? Does it scratch your tint? Thanks

[@TonyTheTruckGuy]

No tint yet. I had weather tech in-channel guards on my ‘12 ram with tint and it maybe sort of scuffed the tint just on the last maybe 1/2” of the window edge but if the window was all the way up or down you couldn’t see it and it wasn’t ripped or anything. Auto up still works fine as long as you haven’t had windows down for like 8+ hours. I did somehow get a hairline crack on the corner of my drivers window one, but it hasn’t gotten any bigger and still holds solid.

[@MrDude707]

Is there a link for replacement rivets? One of mine isn’t holding tight anymore & needs to be swapped out. TIA

[@TonyTheTruckGuy]

I assume you mean for the rear window vents. I did a quick Google search for OEM ram window vent rivets but didn’t find anything that looked correct. They probably make you have to buy the whole kit again. I’d call your local dealer and see if they can possibly find them for you or sell them to you out of another kit.

[@MrDude707]

Correct, yes from the rear deflector. I also didn’t find any direct link for replacement rivets. I’ll contact the dealership where I purchased. Thankyou

[@GraftonP]

Did you ever find replacement rivets? I nuked 3/4 of on the front-most rear window. Sausage hands did me no favors

[@cgmarner]

Is this the Low profile?

[@TonyTheTruckGuy]

I’m not sure if Mopar offers a low and high profile. I just got the smoked Mopar in-channel ones. The in-channel don’t stick out as far as the stick-on style, so I guess I would call these sort of low pro.

[@cgmarner]

@@TonyTheTruckGuy thank you;)

[@LDeol]

Do the front ones not have adhesive? Or did I miss it?

[@TonyTheTruckGuy]

I don’t believe the front ones had any, just held in by pressure.

[@markweber2553]

This video will not play,, please repost , I'd like to know if I installed the rear windows correctly

[@TonyTheTruckGuy]

Sorry for the late reply, 300+ comments were "being held for review" for some reason. Are you still having issues? It's working fine on my end and other people have been viewing and commenting on it.

[@donearl6675]

😎😎!

[@syscam1]

I installed the WeatherTech on my 2014 f150 but had to remove them because the auto up feature would not work when they were installed. The window would go up and make contact with the visor and automatically roll down. I tried working them in and other things they suggest but they just don’t work. The other issue is that they increase the wind noise in your cab because they’re stuck in that channel and it can’t seal as well. You will also scratch your glass because dust and dirt get caught in that channel and when you role up the window, the dirt particles scratch the glass because the glass is laminated tempered glass. This type of glass scratches easy when debris is dragged across the surface. I love the look of them compared to the adhesive ones but unfortunately, they will scratch your glass and add wind noise to the cab.

[@TonyTheTruckGuy]

That’s kinda odd, my buddy had the WeatherTechs on his 2011 and didn’t have any problems after the “work in period” like you were explaining. They do create more wind noise like you said and may scratch along the edges but it is what it is at this point for me. I regularly wipe the door seals to help reduce the scratches and still prefer them over the stick-on style.

[@syscam1]

If memory serves me correctly not all model years had the auto up and down feature. Some just had the auto down feature which didn’t effect things when rolled up because you had to manually do this. The Platinum I had had the auto up and down feature. I also had no issues with the window going up when these were installed on a 2013 Ford Explorer. This vehicle only had the auto down feature as well

[@TonyTheTruckGuy]

Yeah his 2011 XLT had auto up and down on the 2 front windows

[@junjianzhu7540]

Bro those little push pins are so slippery, I got all 3 of em in perfectly and the last one just flew when I put some pressure on it.

[@TonyTheTruckGuy]

Those and the bug deflector clips are both a huge pain haha

[@LDeol]

Dude how?? I can’t get these fuckin things in!! Even lost them a couple of times! Lol. Wish these things were threaded. Such shitty design

[@TheIamdevin]

I had my dealer install these before i even got my truck and noticed initially they scratch my windows and 6 months in my windows look terrible in my opinion are yours scratching your windows?

[@TonyTheTruckGuy]

Not that I have noticed. Are they just kind of scratched at the top 1/2" of the window where they contact the visor or?

[@TheIamdevin]

Tony The Truck Guy thats where mine are scratching! Also i have my windows tinted and now my tint has scratches on the top inch of my window

[@jeffshultz3883]

Sooooo! It's scratching the very top of you're tint. So pull the damn things out and trash them. What do ya want? Pretty tint windows or rain blowing in on ya? Make a choice snowflake!

[@lindafrankenstein9502]

Will this fit my new body style 2019 Ram Rebel crew cab

[@TonyTheTruckGuy]

Sorry for the late reply, 300+ comments were "being held for review" for some reason. Yes if you have new body style 2019 crew cab, these should work!

[@barryhamilton5105]

Do the power folding mirrors work with this set?

[@TonyTheTruckGuy]

Yep! At least mine do. Not sure about the tow mirrors.

[@VitalySokorenko]

The original visor is full of slag, when installed on a car, the front windows do not close, as a result, I threw money away ...

[@TonyTheTruckGuy]

Brand new factory visors? I would exchange them. I've not had any issues.

[@VitalySokorenko]

@@TonyTheTruckGuy OEM Mopar

[@TonyTheTruckGuy]

@@VitalySokorenko I’d return them if you just purchased them

[@Jnu925]

You still have these on, how they holding on?

[@TonyTheTruckGuy]

I do! Somehow I managed to get a small hairline crack in the corner of one of them, but it hasn’t gotten any bigger and it hasn’t caused any issues. You will also hear more wind noise with these in-channel style wind deflectors as opposed to the stick-on style, but it’s really not that bad. I always have my radio going anyways and can’t even hear it.

[@Jnu925]

@@TonyTheTruckGuy sweet bro thanks for the info.

[@TonyTheTruckGuy]

@@Jnu925 Any time!

[@robertisler6981]

quad is the same install.

[@TonyTheTruckGuy]

Good to know, thanks!

[@IamChucky_]

Item no longer for sale??

[@TonyTheTruckGuy]

Sorry for the late reply, 300+ comments were "being held for review" for some reason. Did you end up finding some?

[@CajunCop71111]

Get some tint on that fish bowl

[@TonyTheTruckGuy]

Fish bowl? haha

[@basicbarks]

For some reason my driver side on is loose, the passenger side fits like a glove...it's going to piss me off....

[@TonyTheTruckGuy]

Did you get them from the dealer?

[@basicbarks]

@@TonyTheTruckGuy yup, heading up there tomorrow to show them

[@TonyTheTruckGuy]

@@basicbarks Good, I would think they would swap them out for you. Unless something is wrong with your door somehow

[@basicbarks]

@@TonyTheTruckGuy also one of my clips for the rear was wrong lol, it didn't have the little teeth that hooks in...so now I have 3 guards and one waiting until tomorrow 😅

[@TonyTheTruckGuy]

@@basicbarks What a mess 😓

[@buckwild788]

Buddy u installed the rear ones the wrong way. Shouldn't be able to slide the clips back and forth. Just so u know

[@TonyTheTruckGuy]

Yeah I was going to make a note that you're technically supposed to get the clips into the higher grove, but I've had other people tell me that you basically have to remove the door seal for that which was a total pain for them. I haven't had any issues so far this way and nothing is loose.

[@LDeol]

Bruh, can you make a video on how to fasten the damn nut n bolt? Lol. I can’t get these fuckin things in!

[@TonyTheTruckGuy]

You mean those plastic push pins for the rear window vents? They’re just a bitch. Almost need a big pair of pliers to pinch the plastic pin and the metal bracket that it goes into without actually damaging the vent.

[@heartofdixie67]

I AM SO GLAD I LEFT TECUMSEH, MICHIGAN FOR ALABAMA IN 07 AFTER ODUMMA RUINED THE ECONOMY !!! THAT SNOW ,COLD AND SALTY ROADS MAKE ENJOYING TINKERING WITH CARS TERRIBLE NO MORE OF THAT DOWN HERE !!!

[@charleslincoln5357]

Man mine are cheap ugly ones lol

[@TonyTheTruckGuy]

If it works, it works haha.

[@jvon17]

Avs looks way better

[@TonyTheTruckGuy]

They also don't offer any protection from the front, but to each their own.

[@michellem.9681]

save your you tube $ and get out of trailer park

[@TonyTheTruckGuy]

😂😂 No doubt. Damn houses are SO expensive now though.

[@Ahmad-yw5hl]

Correct me please if I’m wrong please. I feel this generation is lower than the last generation.

[@TonyTheTruckGuy]

Lower as in actual height? Or lower standards and quality?

[@Ahmad-yw5hl]

Tony The Truck Guy in height

[@jeffshultz3883]

Which generation you talking about? I'm a baby boomer and I think this newest generation is way lower in every aspect! Oh.. wait! You're talking about generation of trucks. My bad !! Nevermind me I'm getting old.😉

[@clintbougher4428]

Did you do the weathertech video yet ?

[@TonyTheTruckGuy]

Weather tech video for what?

[@clintbougher4428]

@@TonyTheTruckGuy for vent shades for ram

[@TonyTheTruckGuy]

@@clintbougher4428 I think I just mentioned that I would link the weather techs in the video description if you wanted to buy them. Didn’t really have any intentions of installing them since I liked these ones, but I’m sure the steps are similar, at least in the front.

[@TonyTheTruckGuy]

@@clintbougher4428 Check this one out - kzbin.info/www/bejne/rnuQh6OwibGYl8U