2019 Ram Rebel Rough Country 6 INCH LIFT VERTEX SHOCKS

Here it is everyone our biggest rebel mod yet the 6 inch Rough country lift kit featuring the Vertex coil over shocks, in this video we install the lift on the 2019 Ram Rebel and give you an idea what is involved and get some completed shots of how it makes the truck look, now let the testing begin. Enjoy...
Check out Rough Country
www.roughcount...
Amp Research Steps Affiliate link
amzn.to/32jcrxG​​
Get Your lights
Discount Code Hammerdown12 for 12% off
Colight 4 Inch Rob2 Series Spot/Flood Beam Auxiliary Lights
bit.ly/3ixI7qm​​​
Drill-free Bracket Clamp Holders (Set/2pcs)
bit.ly/31qS9BV​​​
18AWG DT Connector On Off Switch Wiring Harness Kit-2 Leads:
bit.ly/31z7xMh​​​
Check out Determined Veteran
/ armyrese...​
Camera Affiliate links
amzn.to/3ueSPG...
SD Card link
amzn.to/3rFS87...
Check out Morimoto
www.morimotohi...
Amazon affiliate link
Get your push clip tools
amzn.to/3t6AZo...
tailgate decal
ebay.to/3dMvOp...
Get Your kit now
Check out AvalonKing @
avalonking.com...
Dash Camera Affiliate links
Camera
amzn.to/3c1ZqN...
Harness
amzn.to/3ed07G...
SD Card
amzn.to/389AQc...
Affiliate links for door lights
4 piece Opt7 Aura Pro kit
amzn.to/30dDRU...
Add on 12 inch lights
amzn.to/2O44Cs...
Affiliate links for the Rear lights
Deutsch connector crimp tool kit amzn.to/2MQebd...
KC light mount amzn.to/30g1IT...
Rigid lights (Black and newer version flood) amzn.to/3ebr25...
Rigid Radiance Red lights amzn.to/38dTvn...
Switch Pros module kit amzn.to/30cyFA...
Fuse tap amzn.to/3sPIpN...
Follow Me @
Instagram / hammerdown_...​. .
Facebook
/ hammerdown-m...​. .
Amazon affiliate links
Rough Country Light bar (DRL model not the black one when I looked for that one it wasn't available but may be when you look for it)
amzn.to/3qjhqY...
Red Start Button
amzn.to/3qjF7Q...
Curt hitch hook
amzn.to/38v76H...
License plate cover
amzn.to/2Or8xP...
Dixie Horns
amzn.to/3rmwKo...
Rock Lights
amzn.to/3qjUcS...
American Flag Decal 50 stars
www.ebay.com/i....
LED cup holders
amzn.to/3kPBpg...
For all your beard product needs check out
1740beardbalm....
and use promo code Hammerdown for a 15% discount
Send Stickers for the trailer tool box to PO Box 68 Mohnton PA 19540
Westy @ Westy's Speed Shop
Check Him out @
/ westysspeeds...​. .
Instagram Spacemountainsupercars
Check out Todd @ TSE's auto accesories
/ tses-​...​
Check out my Sponsors
vortechsuperch...
www.coldairind...​​​​​​​
www.morimotohi...
www.p3gauges.co...
www.novistretc...
www.tiresticker...​​​​​​​
zl1addons.com/...
www.gopowerspo...
www.jmschip.co...
www.borla.com/...
www.auxbeam.co...
www.roughcount...

[@donearl6675]

"HammerDown" im proud of you man👍😍...job well done😆....to bad for me though i have "AirRide"🥺.but good you 🤩🥳🥳❗

[@HammerdownMotorsportsUSA]

Thank you but this kit also works with air ride just not with the vertex shocks

[@donearl6675]

@@HammerdownMotorsportsUSA 😲👍

[@ddtrimdan7075]

I just lifted my 2020 Rebel Blackout, with 6 inch BDS, 20" Fuel Lethal's and 35" Nitto Ridge Graps. Perfect combo. -24 offset so it doesn't give it that crazy stance where the tires stick out to far. Rides Great!!! I also have the Borla Atak!

[@bronxbomber9616]

Just when I thought this truck couldn’t look any better holy smokes that is PERFECT!!!!

[@amolinari9]

I never used to be a rough country suspension fan but this 6” kit does look like good quality. Def need 37s now! Glad the rebel is long term now I was afraid you were gona sell it.

[@VirginiaHapa]

Man, now I want 37s. It looks awesome.

[@HammerdownMotorsportsUSA]

Thanks I have thought about 37s but the cv axles and ball joints would take a beating off-road with them so still undecided

[@riley082011]

I love the cab lights. I don't think I'll ever look at a Ram Rebel the same again lol.

[@enden6963]

Truck looks and sounds awesome. I have the same 2019 Rebel and I wish I could make mine as nice as yours. Keep up the awesome content.

[@codydonovan7356]

It looks like Rough County is finally making quality products!

[@thetintwizardsllc3128]

Man I wish u where my buddy u made that look easy thank you for sharing

[@zachminer6478]

I've been so tempted by the Readylift SST. I never made the jump for all of your reasons stated. Finally good to hear someone admit they made a mistake and don't do this lift. :)

[@kc2743]

i did the SST as well with my Laramie and have been contemplating the 6 inch ...i had the rough country 6" on my f150 and loved it....i don't think i kept my original upper control arms so I hope there is a workaround there....great stuff as always!

[@patcurran6427]

Almost done with this install. Noob question. Did you have to grease the tierod ends? Looks like there is grease in there already. Love the content!

[@portzelkiportzelki3286]

Looking very impressive. :) Another job well done.

[@mikeh2772]

That front diff. is stronger without being tapped IMO. Great video by the way.

[@alexcoombs9166]

That looks sooo much better

[@mikesines2146]

Looks good man! Im looking at a 2019 Ram rebel as well.

[@brandonperschon449]

Looks nice. I made the same mistake on my Laramie with the off-road package.

[@ericsandhu6253]

Great looking set up!

[@PA.SS1LE]

Love it Steve. Nice work!!!

[@Solo_01]

Dude... I always thought your truck was badass... Now it's even more badass!!! Love the look! Curious to know if you have time, what is the overall height of your truck now? I'm thinking a 6in lift for a normal garage at ~84" might not work for some of us. Your truck looks good! Congrats!

[@HammerdownMotorsportsUSA]

Thank you it’s a solid 7 foot now

[@dylang4249]

down here in south florida, i wouldnt be getting into any garage lmao, unless i take some of the air out of the towers lmaoo

[@giggityguy9911]

Enjoy your content and the Rebel of course! Working on building my rebel right now. Cant decide on what size lift to get. How much did the 6 inch lift with your tire and wheel set up effect your fuel economy??

[@HammerdownMotorsportsUSA]

I like my 6 inch I can get up to 14 highway on 35s

[@Jack-b5o6r]

Great job bro

[@ramrider1453]

Love what ya doing dude👍👍👍

[@paulheaney643]

Sorry to bother you I have watched you videos many times. Love them all I have same truck and am thinking on puting lift. 6 inch or ready lift 3.5. Do you know the exact reasons why the 3.5 ReadyLift is an issue on the ram Rebel or is there a link I could possibly look at I have discussed this with it dealership also the shop that I'm potentially going to get the Lift at and they have no knowledge regarding the ram Rebel and the 3.5 ReadyLift issues. Thx in adavance

[@HammerdownMotorsportsUSA]

The readylift is made for the regular ram springs the Rebel has larger ones so it puts the truck up higher and in turn makes fir an extreme cv angle and also rubs the spring with the preload spacer in so I would go smaller level kit or full 6 inch stay away from the SST lift on the Rebel IMO and experience

[@paulheaney643]

Thx so much. Your awesome

[@fakelies6747]

7 months later, how is the kit holding up? Deciding between this and the bds kit and the price difference makes this kit very enticing. Appreciate the input!

[@HammerdownMotorsportsUSA]

Kit has been great so far I’ll make an update vid this week

[@fakelies6747]

@@HammerdownMotorsportsUSA look forward to the update vid. Any thoughts on running 37s with that setup?

[@HammerdownMotorsportsUSA]

@@fakelies6747 they would definitely fit but see how things go when it’s tire time

[@Pjw350]

Keep that hammerdown!

[@rcp3325]

Hi, just got the Vertex installed on my Rebel. I did have one of the internal valves stems that broke/rub and my front tire deflated but got it fixed and now use a shorter valve. My one question is what setting do you have on your truck. Default is 4 (Front) and 4 (Rear), I have since changed to 5 (front) and 4 (rear). Thanks!!

[@douglashardy177]

How much smoother is the ride? Or did it get worse? I upgraded to the Bilstien 5100’s and its so much rougher. Wondering if the vertex shocks are a smoother ride

[@Champ-cq6pv]

Interested in this setup. Do you know the average life expectancy of the Coilovers? Is there a bunch of maintenance to do on them?

[@cjrod9443]

Where's the rough country discount code? Haha. Want this on my ecodiesel

[@FullDrawOutdoors]

I thought the new control arms put everything back into spec, that was the whole point of the ready lift. you get 3.5 no cutting and the new upper control arms retain the factor ball joint location so you don't go wiping them out in 10k miles. So its gotta be something with your truck already having a extra inch of lift if they say not to use it. Truck looks good though! I want a 6in but im in the same boat of I don't know if Ill buy it or give it back when the lease is up. So far I'm gonna buy it. If I do go 6in ill go BDS lift because if the dealer try's to deny my warranty, BDS will send their lawyers after them!

[@HammerdownMotorsportsUSA]

Yeah the control arm corrects upper ball joint angle but my Cv angle was the big problem with Rebel springs

[@RoughCountryTV]

The Magnuson-Moss Warranty Act was designed to keep dealers/manufacturers from denying warranties based on a modification. They have to prove that the installed modification caused the issue you are seeking to warranty. Aside from that, we provide Warranty Guard on all our kits to cover you if there is an issue.

[@FullDrawOutdoors]

@@RoughCountryTV Interesting enough, you guys should market that more. Lots of people dont even know you offer (Warranty Guard), But the BDS 560plus is well known, that could literally be the deciding point for people, as dealers are always out to try and not warranty something over modifications. I have a 5in rough country on my 03 cummins and have no complaints. But BDS is in my state so ill still end up purchasing that just for ease of parts availability and obviously if something happens it would be easier to get ahold of them being only 2 hours away.

[@mauropineda6589]

I’m between this kit and the BDS coil over system kit…

[@mikeh8498]

Nice. What's the wheel offset? I live in Maryland and worry about them sticking out too far.

[@paulheaney643]

Thinking on doing the same. Same truck. Question. When you finished the 6 inch lift In the video. Was that 35 inch tires ?????

[@HammerdownMotorsportsUSA]

Yep

[@paulheaney643]

You are awesome. Thx so much. Keep up the videos. Love them

[@HammerdownMotorsportsUSA]

@@paulheaney643 thank you for watching much appreciated

[@ishurashak3059]

Love ur videos big fan! I have a question if you can please help me. I have a rebel 19 sometimes when I push the throttle I hear a rattling sound from the engine can u please give me an answer! Thanks

[@HammerdownMotorsportsUSA]

Hmm it could be a little lifter noise sometimes these engines make a little noise on start up but other than that it could be an exhaust rattle or something it’s hard fir me to know without hearing it, thanks for watching

[@ishurashak3059]

@@HammerdownMotorsportsUSA thanks a lot man your the best

[@douglashardy177]

Did you notice a huge difference in height after adding the 6” lift?

[@a1023c]

About to get this lift installed on my rebel. Would I benefit buy adding bds control arms? Or would it make no difference?

[@HammerdownMotorsportsUSA]

I have the stock ones with no issues you have to watch some of the aftermarket ucas have a corrected ball joint angle for a level kit which you don’t want on this lift

[@rcp3325]

How does the rear coil look? Do the coils rub. I hadn’t seen any videos from anyone on how they look or perform.

[@HammerdownMotorsportsUSA]

The coils look great no rubbing that I have seen maybe I can do an underside view vid in the future

[@tsubasarides4650]

Hows it holding up? Ive heard mixed reviews with Rough Country

[@HammerdownMotorsportsUSA]

It’s been problem free

[@joshbenson7736]

Would you recommend the ready lift 3.5 for a bighorn without the off road package? If you didn’t have then extra 1” of lift would your cv axles be fine?

[@m.w.9460]

Looks great!

[@UnboxTactical]

Hey do you have any knowledge on running these lifts with 18inch Method Race Wheels? Online it says these lifts do not work with 18inch wheels curious if that only refers to stock 18s. I’m running a -12 offset.

[@HammerdownMotorsportsUSA]

I can’t say for sure but I can’t fit my stock rims anymore-12 20s is what I run

[@tango165]

Looks great!! 😎👍🏼👍🏼

[@RimRig_AZ]

I knew it, WOW!

[@downlow5077]

dumb question but whats the 415 you mentioned for cleaning up the chassis

[@LondonHasFallin]

👌💯 Dam near perfect 📈

[@atlasraptor9322]

Looks Good

[@ramrider1453]

How does the ride feel? Any different and in handling?

[@HammerdownMotorsportsUSA]

It handles great I’ll have an update vid in a few days

[@clintlane5426]

thin air up that high...well done

[@matttezak2334]

Badass truck man

[@tpike46w]

u need 2 inch wheel spacers and fender flares to really make that thing look mean!!

[@HammerdownMotorsportsUSA]

I have thought about flares but not really into spacers I have some 1.5 inch ones but you get ticketed and towed at the beach for wheels sticking out of the fenders like that #stanced

[@MartyMotoring]

Looks awesome! Beefy

[@Solo_01]

Wow!!!!

[@douglashardy177]

Is this a hemi or ecodiesel?

[@HammerdownMotorsportsUSA]

non e torque hemi

[@brentnunn7031]

Does the rear shocks still have the same tow weight?

[@HammerdownMotorsportsUSA]

They can probably do more bigger springs and way bigger adjustable shocks

[@blackthought7250]

how do you like them so far?

[@HammerdownMotorsportsUSA]

Love it total new feel

[@DosMs0124]

Looks beautiful. I agree with the rest of the people......37s 😆 go big or go home 😂

[@HammerdownMotorsportsUSA]

The rubber arm may be twisting a little

[@DosMs0124]

@@HammerdownMotorsportsUSA now the you mention that, my brother was thinking of going up to 37s, the tire shop recommended just to keep the 35s on. I ask him and see what was the reason for that.

[@jermainewindham6024]

Hammerdown would you sell me the 3.5 inch ReadyLift? I wanted to add that to my 2019 RAM 1500.

[@HammerdownMotorsportsUSA]

I have had some interest in it but u need to take the spacers out of the original struts first

[@jermainewindham6024]

@@HammerdownMotorsportsUSA yeah right now I have the Motofab 2 inch spacers. It’s not enough for me. I think the 3.5 would be perfect. If you decide we can make a deal please let me know. Great content as always brother! and HAMMERDOWN.

[@Swamplife_TY]

Will this fit in a 8 foot garage?

[@HammerdownMotorsportsUSA]

Would be close it is just over 7 feet

[@erniearruda8861]

Mama Trex😉👍🏻👍🏻🇨🇦

[@richardalexander1838]

what wheel is on there?

[@BigSexysHouse]

That looks so good! I’m a Ford truck guy but that is sexy!

[@HammerdownMotorsportsUSA]

Lol thanks my Ford is on it’s way I hope