Getting a stage 2 torque cam s&s oil pump cam plate lifters cuffs adjustable push rods. Already have highflow air full exhaust Rinehart headers rc slip ons. Can't wait to ride it!
@ridingwithjersey68693 жыл бұрын
Hey man. Enjoyed your video. I'm from NJ as well but now call Arkansas home. I picked up a 2020 Street Glide Special on Veterans day. Had 4" Tab Performance Slip ons when I got it. 3 days after bringing her home I sent her back for Stage 2. Like you I did the torque cam along with header, screaming eagle intake, inner cam bearing, black pushrod and tappet covers, tuner, and dyno runs. 7 year screaming eagle warranty drove my decision to have Harley do the work and not me. Your numbers if you haven't gone back should be close to mine 106.17hp and 123.75tq. The bike runs like a raped ape now as I'm sure yours does as well. Be safe out there brother.
@mikegroft15695 жыл бұрын
Fullsac head pipe is what im thinking of getting for my road glide special as well. Sounds good. Like the factory look of head pipe,no one will know it is a perfomance pipe. That is what i want (sleeper build) and keep factory air cover with hi flow air cleaner.
@mrkapusta99355 жыл бұрын
Mike Groft love it
@TheImtoomuch3 жыл бұрын
Thank you for the idling sound! Not as lopey as I had hoped, but once you twist your wrist it sounds angry!
@BrentClay5 жыл бұрын
Gorgeous bike. I did a Stage I on my 2019 Road Glide. I love it. I'm not a hot rodder, it was more sight and sound for me. Been thinking of a Stage II. Thanks for sharing your experience.
@e.w.dombroski95905 жыл бұрын
Brent Clay the stage two screaming eagle torque cam gives it a little more bite. Very happy with the results. Did the fullsac headers with it and really woke the bike up
@charlesparr32964 жыл бұрын
@@e.w.dombroski9590 Can you feel the difference from stock cam to the Screaming Eagle cam?? I just bought a 2020 Road Glide Limited with 114 M8. Had The Screaming Eagle tuner installed and Rinehart exhaust from the heads all the way back, was considering a cam change. Was wondering if it's worth the money for a cam change.
@roadglide11423 жыл бұрын
I’m thinking 🤔 of stage two next or save up & just go 131 Kit ? Decisions Decisions lol 😂
@KevinButler8164 жыл бұрын
Ok it’s been a year are you still satisfied with the torque cam or did that just whet your appetite for more power ?
@kennethwise71085 жыл бұрын
As a 1st Generation Road Glide owner (Evo powered) I am ALWAYS in awe of how far these bikes have evolved over the years. Here's my 95th Anniversary Road Glide which is 100% stock and unmolested with only 136,000 miles on her. I was fortunate enough to get the Chief designer of this particular model (Willie G) to autograph her last year while at Daytona. kzbin.info/www/bejne/m3rSmaGtZ8yfhs0
@slyguyaction3 жыл бұрын
Coming from a TC103, I’m surprised at how good the power is with the M8 107 in my used 2017 FLTRU I bought recently. Yours sounds great. Ride safe
@mrkapusta99355 жыл бұрын
Just did progressive 944 ultra low HDs on this bike today! Holy fuck do I love it even more. Stance is mean and it handles unreal!
@Crowbar3812 жыл бұрын
Have you got any dyno results yet ?. Love that cam, not too heavy, not too light, just right
@ZevGriffin-s5u Жыл бұрын
New Jersey? My condolences…
@joerye62713 жыл бұрын
Nice bike, from a fellow Jersyan.
@eugenestump1114 жыл бұрын
Sounds nice - good job on your RG
@galshuller5 жыл бұрын
Dude, your bike looks amazing !!! How did you remove the red reflector of the tail light ?
@mrkapusta99355 жыл бұрын
I got the curved license plate holder, when i took off the stock one i just left it off. Ill be honest it was a pain in the ass getting the curved one on. plus HD gives you silver screws and i had to paint those.
@mrkapusta99355 жыл бұрын
Thanks for the compliment. Two more changes coming. Dropping the rear with a shorter shock and upgrading the Audio ....still doing the research on the Audio tho....expensive
@dariocuter56924 жыл бұрын
Great Video, thank you brother! Ride save.
@stevenmiller32724 жыл бұрын
The bike sound bad ass brother. I just bought 19 street bob next month I'm gonna have the dealer do a cam upgrade and I'm wondering because I really can't afford the stage 3 right now but I'm building a club style old school fxrt mini bagger(that's the overall plan anyhow) and I want some punch so when I add weight she goes. Anyhow when your cruising 80 or hwy speeds hows the rpms with the stage 2? Does it run high or normal rpm and does it give the bike better passing power? I'm wondering if I really need the 3. I don't like to redline my bike so I know I don't want the stage 4.
@stevenpierce91603 жыл бұрын
I am 69 my last roadking 2020 with different handbar ,stage 2 ,different exhaust pipe
@adrianhardy83724 жыл бұрын
Good video, who makes the curved plate holder?
@stephenozga4 жыл бұрын
Sweet ride!! Love the look with the tips upside down on the pipes. Did you go with the 4" or 4.5"? Getting ready to order some and I'm having a hard time deciding on what size.
@e.w.dombroski95904 жыл бұрын
Stephen Ozga I went with the 4’s bruh. It fits the ass real nice and they sound mean as fuck.
@ridingwithjersey68693 жыл бұрын
E.W. Dobroski is right. The 4" sound incredible. The 4.5" does have a more subdued but deeper tone with the Zombie baffles. I did a Stage 2 on my Street Glide with 4" and Zombie baffles and there is a huge difference in sound brouggt the header and cam. Makes the bike sound like it wants to stand up and rip your face off. I love it!!
@mathewshackelford80374 жыл бұрын
Me again amigo...what'd you use to get the reflector off the fork? I was thinking fishing line, 3m scrub pad and some goof off to get the residue off.
@e.w.dombroski95904 жыл бұрын
mathew shackelford I actually had it done during a service. So not sure. I would definitely research.... I’m sure there is stuff on line
@blades22552 жыл бұрын
Boy I do like that seat is it slippery looks it
@rdg65525 жыл бұрын
Very nice!
@e.w.dombroski95905 жыл бұрын
RD G thanks bro
@terrencejohnson32773 жыл бұрын
Awesome bike!
@johnsands66524 жыл бұрын
Sweet Ride
@dannypierce35204 жыл бұрын
I spoke with my dealer last week and the service tech told me I couldn’t run aftermarket head pipes with Harley-Davidson’s tuner?? What am I missing?? I’d like to have the smart tune pro, (I currently have the SE pro street tuner) but they’re dead set on telling me if I remove the catalytic converter then I have to have an aftermarket tuner...WTH!???
@dannypierce35204 жыл бұрын
I’m wanting either Fullsac or RCX head pipes...
@e.w.dombroski95904 жыл бұрын
danny pierce he’s full of shit and knows nothing. I’m running a fullsac header, with tab performance bam sticks with zombie baffles , a SE street tune AND a smart tune pro. Bike runs amazing. The smart tune pro allows for the extra O2 from removing the cat’s. Find a new service writer
@e.w.dombroski95904 жыл бұрын
danny pierce you will need the smart tune pro in addition.
@dannypierce35204 жыл бұрын
E.W. Dombroski Thanks so much for the info! I’m definitely gonna stick with the Smart tune pro upgrade with new head pipes now. Ready to get my torque cam installed too! Ride safe, and thanks again!
@e.w.dombroski95904 жыл бұрын
danny pierce right on brother ! The smart tune pro is awesome. Just cracked 10k miles and it runs like a dream. Headers and that torque cam will make you very happy. Ride hard my brother!
@anatoliyefimov49845 жыл бұрын
So what happened with the next time you got your bike on to the dyno?
@e.w.dombroski95905 жыл бұрын
still waiting to do it on my 5K...just been riding the fuck out of it!
@patrickstevens54575 жыл бұрын
Why not the black tappit covers
@e.w.dombroski95905 жыл бұрын
Patrick Stevens I liked em in chrome. Made the push rod covers stand out more . Just my taste I guess.
@teamsmallpinepubliclandhun26524 жыл бұрын
Which cam did you use
@e.w.dombroski95904 жыл бұрын
Mark Kelley I used the SE torque cam.
@lucasplitt92145 жыл бұрын
What tuner do you run?
@mrkapusta99355 жыл бұрын
lucas Plitt SE pro street tuner and SE smart tune pro.
@lucasplitt92145 жыл бұрын
How does it run? Did they have to drill into your headers for the o2 sensors?
@mrkapusta99355 жыл бұрын
lucas Plitt going to be honest, I had my service writer do the install. He Did the headers , tuner, cam, o2 sensors. Push rod tubes all for under two grand . The bike performs amazing. Exactly what I wanted. Great torque especially between 2800-4000 rpm. Get to 100mph fast as fuck. LOVE the results.
@billz4104 жыл бұрын
Doesn’t really sound much like the old carburetored HD’s... sounds more like it’s running on bad gas.
@twistnshout30312 жыл бұрын
Oh I know your kid Tyler. Was ripping around with him on the supermotos. Recognize the garage. I think...
@SANTIAGOSANCHEZ-yw3pd Жыл бұрын
Your RGS is that a M8 114? How was the Stage II performance? I'm getting a SII on my 2017 M8 107.....Stay safe.
@mikeeger75815 жыл бұрын
Kool bike
@ar-dude64934 жыл бұрын
Beautiful ride my man. Love the sound!! My dream bike right here!!
@sgibby88174 жыл бұрын
Greetings from Gloucester county nj. I got a 19 rks special
@e.w.dombroski95904 жыл бұрын
Sgibby 88 awesome bro! Maybe catch you out there in the spring....or if this damn weather gives me a window!!!
@sgibby88174 жыл бұрын
I here that. Never know
@sgibby88174 жыл бұрын
Well have to exchange info and meet up some time
@whatsastonerfor5 жыл бұрын
Beautiful machine. Doing research right now on getting performance cams and headers for my 19 special. Thought about doing the V&H power duals and then going with Harley cams. Anyway, thanks for the video. Sounds amazing
@e.w.dombroski95905 жыл бұрын
check out my second vid. Did more upgrades. Also posting Dyno numbers on my set up this weekend
@trex8602 жыл бұрын
Beautiful machine.
@alanfreeman41593 жыл бұрын
North
@andrewminicozzi16345 жыл бұрын
Nice bike. I love that you blacked out the pushrod tubes. I have a 2017 Road Glide Special. I am in Connecticut. I can't friggen wait for the spring so I can get back to riding every day.
@e.w.dombroski95905 жыл бұрын
Andrew Minicozzi yes it’s torture
@klat66365 жыл бұрын
I'm in CT as well, finally getting a taste of spring 50 degs
@mrkapusta99355 жыл бұрын
@@klat6636 Yeah man...we are getting close. I got out on monday for a few hours....was awesome. Looks like SAT and Sunday are shaping up as well. Thank god,, i'm sick of winter!!!
@klat66365 жыл бұрын
Agreed, I was out Monday too. And I will most def be out this weekend. Be safe.....enjoy
@mrkapusta99355 жыл бұрын
@@klat6636 hittin 60 in jerz today! Creeping closer!
@mdellin295 жыл бұрын
Sweet machine
@mrkapusta99355 жыл бұрын
Thanks man. Definitely love the bike
@mdellin295 жыл бұрын
Pulled the trigger yesterday
@mrkapusta99355 жыл бұрын
mdellin29 oh hell yeah man!!!! You’re gunna LOVE this machine.
@e.w.dombroski95905 жыл бұрын
mdellin29 did you pick her up yet?
@mdellin295 жыл бұрын
@@e.w.dombroski9590 Saturday or Sunday
@jeymisantana55894 жыл бұрын
The way you have the bike set up is perfect. I'm thinking of getting the same bike now that the year is here.
@e.w.dombroski95904 жыл бұрын
Jeymi Santana you won’t regret it. I’m BEYOND happy. Ain’t nothing like a Harley . Don’t give a fuck about the haters . Go stage 2 torque cam! Wakes that bitch up
@atnotthiolnoy14 жыл бұрын
Sweet ride. I definitely need a stage 2 !
@stevensimpson10433 жыл бұрын
Doing a full stage 2 next Wednesday. Rinehart full exhaust, ventilator extreme breather, torque cam, and having it dynoed. After some time with the cam setup, would you still recommend it?
@e.w.dombroski95903 жыл бұрын
I say yes… but woods came out with a new cam 22xe with a tts tuner I’m hearing ridiculous numbers . It’s been two years with my set up and have not had any issues whatsoever! Like many bikers … I’m always chasing more HP and more Torque .
@stevensimpson10433 жыл бұрын
@@e.w.dombroski9590 I’m loving my setup thus far. Maybe when my warranty is up I’ll do some high performance stuff.
@Jay_Tovennn3 жыл бұрын
What does a stage 2, 3 & 4 consist of??
@DkDProdutions3 жыл бұрын
Stage 2 is a cam upgrade, stage 3 goes bigger cylinders and pistons, stage 4 is bigger intake
@sam010101014 жыл бұрын
Awesome bike bro
@e.w.dombroski95904 жыл бұрын
Sampson Mavrogiannis thanks my man. 1 year no issues 10k miles
@kennethwise71085 жыл бұрын
Super nice looking bike! As a 1st Generation Road Glide owner (Evo powered) I am ALWAYS in awe of how far these bikes have evolved over the years. Here's my 95th Anniversary Road Glide which is 100% stock and unmolested with only 136,000 miles on her. I was fortunate enough to get the Chief designer of this particular model (Willie G) to autograph her last year while at Daytona. kzbin.info/www/bejne/m3rSmaGtZ8yfhs0
@mrkapusta99355 жыл бұрын
thats kick ass
@kennethwise71085 жыл бұрын
@@mrkapusta9935, Thanks for the compliment, hopefully you too can enjoy several more years of trouble free ownership and log some miles and memories with it like I have. We won a massive 4' tall trophy at the Timonium International Motorcycle show in February 2019 for the "Best Evolution Touring bike". We rolled over 100k on this day 👇 kzbin.info/www/bejne/eoisiYWMoMx5bM0
@jamesoliver5655 жыл бұрын
How is the quality of the bars. I was thinking about the renigades instead
@mrkapusta99355 жыл бұрын
James Oliver quality is SUPERB
@mikeeger75815 жыл бұрын
Hey we are almost neighbors, I’m in Middletown ny
@mrkapusta99355 жыл бұрын
nice man! Bike going in tomorrow for 1000 mile service and putting progressive suspension on her. CANT WAIT
@CrayzJohnny5 жыл бұрын
Nice bike, I just ordered the HP cams for my 2018 RG, can’t wait to feel what the difference will be. Did you get to feel the difference with your cams?
@mrkapusta99355 жыл бұрын
Shaker omg yes. The pull between 2500 and 4000 rpm is “hold on tight” kinda shit. Coupled with the smart tune pro, and the pro street tuner , the bike is tuned awesome. Extremely happy with it.
@CrayzJohnny5 жыл бұрын
MrKAPUSTA good to know bro, thanks!
@mrkapusta99355 жыл бұрын
@@CrayzJohnny did you get the bike back yet? curious how you liked the cam switch!
@CrayzJohnny5 жыл бұрын
MrKAPUSTA not yet, cams on backorder. Also still snow and ice on the roads here in NH. I’ll try to update when the bike is complete (projects for this year anyway, lol)