This is the best video for tailgate lock installation on KZbin. Thank you
@MyTacoma3 жыл бұрын
Thanks 🙏
@h2beezy28 ай бұрын
I agree best vid, but not the best background music hahahahahah
@ericr62823 жыл бұрын
Just got my 2021 TRD OR, 2 dealers have quoted me $575 and $430 for parts and labor to do this, your video just gave me the confidence to do it myself. Thanks for very much for the clear instructions and quite frankly that’s what I am here for, the music is fine. Everyone is a critic.
@MyTacoma3 жыл бұрын
Thanks
@ericr62823 жыл бұрын
Just did the install, the video was such a help! Thanks again.
@rfarns246043 жыл бұрын
Do you have a part number? I have a 2021 TRD Sport. Thanks.
@mobis003 жыл бұрын
I followed your video step by step and was able to install one on my new Taco. Thanks for a perfect how to tutorial
@MrJose0212922 жыл бұрын
How long did it take you?
@gianniflores15963 жыл бұрын
Just installed mine. Took an hour and I took my time. Thanks to your video. The hardest part for me was getting the two plastic clips that hold the camera and tailgate wires together. It was a pain to get them wedged into place.
@MyTacoma3 жыл бұрын
Thanks for watching, Yes it is a little difficult part.
@Soul_Survivor23 жыл бұрын
It's easier to put them in from under the tail gate (down) as you.can see it very clearly
@WhatsTheVector2 ай бұрын
Great detail instructions. This OEM Toyota part is supposed to be installed by a Toyota certified technician and does not come with installation instructions. This video enables DIY installation of this OEM automatic tailgate lock that integrates with the existing electrical harness. Everything worked as expected and this video made installation very easy.
@zdiver13 жыл бұрын
Getting mine in two days and you just saved me some sleepless nights. good job!
@MyTacoma3 жыл бұрын
Glad I could help!
@mitch34029 ай бұрын
I ordered this today for under $120 including shipping at Passport Toyota Great gift for someone or yourself. This is the best video on KZbin for this DYI installation Thank
@scottevans55073 жыл бұрын
Your video was the best one out and gave great directions, the only suggestion I would have is to tell people about the orientation of the clips that get mounted for the tailgate harness. Thank you for a great instructional video
@theloneviking91453 жыл бұрын
Yep I agree that was a pain in the neck the little clip part faces to your left.
@mcnitt3 жыл бұрын
That you for this! I installed the factory kit using the instructions and help from your video. Routing near the exhaust was the most time consuming but it was otherwise smooth and easy. I bought the recommended 3M sealer ($30 tube) and used about a pencil eraser amount of it; in retrospect it was unnecessary to use the 3M seal. An zip tie or piece of duct tape in the same spot would accomplish the same and save $30. Anyway, that you for the instruction!
@MyTacoma3 жыл бұрын
Glad I could help!
@MKultrapdx Жыл бұрын
I must have missed the part about the 3M?
@kevinmitchell41310 ай бұрын
@@MKultrapdx In the OEM instructions which this video follows (however not sequentially) calls out 3M item code 08302 for connecting the harness clip to the inside of the tailgate (see 6:30 in the video, where they did not use anything) A copy of the OEM instructions can be found on the sparkstoyota product page - item # PK3B6-35JS0
@josephabad55222 жыл бұрын
Just got my 2022 TRD Sport 4x4 and used your detailed step by step instructions to install the remote lock. Like you suggested I also bought the OEM part instead of the generic one to minimize any breakdown and having to rewire it. Works like a charm and saved me $300! So thank you! You are much appreciated.
@Shanexxl2 жыл бұрын
I put my tailgate harness backwards at first. You made it sound like the male got fed through first but in fact the female end should be inside the tailgate area. Male goes towards front of truck. Easy fix. Should have watched whole video first instead of following along lol. Super helpful video. Took maybe 20-30 minutes all in. Thank you!
@edwardleskowsky26583 жыл бұрын
Good video. Although the music was a little overpowering, I will use it as a guide to my install.
@MyTacoma3 жыл бұрын
Sorry about that
@maryamjan24553 жыл бұрын
Wow nice
@BiggetyBones2 жыл бұрын
Thank you, Thank you! The video was money! Without this video it would’ve been pretty difficult to install. Appreciate you taking the time to create the step by step video.
@Wyoming7343 жыл бұрын
This is hands down the best video for this installation on KZbin. Great job.
@aztecballer122 жыл бұрын
Installed this in 45 minutes with the help of this video. Great work!
@GregWachtel-o5m5 ай бұрын
Great job with camera angles and attention to detail!!! Keep up the good content!!!
@arhalper7577 ай бұрын
Great video! Just installed and went smooth with your instructions. Thanks for creating!
@Garuda14153 жыл бұрын
I just installed this kit. I could see that I needed more clearance to fit the wire protectors at the tailgate and the bed. I rigged a small platform with a piece of plywood and a bench. The plywood rested on the bumper and the bench. I partially removed the tailgate on the passenger side, angled it rearward several inches, and laid it on the platform. The extra three inches of space made this part of the job much easier.
@outdoorfrenzy2 жыл бұрын
You could have also just closed the tailgate and worked from under it. Easily accessible.
@randiruge12653 жыл бұрын
Best video by far on this.....thanks!~
@michaelbanker Жыл бұрын
great video, better than the others out there. has all the detail necessary to do this install properly. thanks!
@dougg2292 жыл бұрын
Amazing details. Gives me the confidence to try it instead of paying 3x for the install at stealership
@JH-mt3pp3 жыл бұрын
Excellent video ! I just bought a 2021 Tacoma and had to redo a bed extender that the dealership didn't install correctly. I will add this tailgate lock myself !
@MyTacoma3 жыл бұрын
Glad it helped! , I installed my bed extender few days ago added video for that too
@mmwjade072 жыл бұрын
I just finished installing mine and it works great, thanks for the tutorial
@tomgregory58143 жыл бұрын
Please note that in the “SR/SX” model Tacoma’s, 2020 at least, there is no wire harness from the passengers side front to rear. I had to improvise by running the harness inside the frame rail and ty wrapping it thru the holes in the frame. I did this by placing a fiberglass rod on the outside of the frame rail and ty wrapping to it, thru the hole. Other than that the plug and play OEM harness is simple to install as you show in your video. The OEM part number for 2020 is PK3B6-35JS0. PS: mine is a 2020 Tacoma access cab with the 6’2” box.
@michaelybarra73 жыл бұрын
Yup I'm stuck now I have a 2020 SR and I didn't check for that harness
@tomgregory58143 жыл бұрын
The video is good relative to the installation. I just routed the harness inside the frame rail rather than in top as noted above. I also didn’t use the metal ties as shown as they aren’t as flexible as the regular ties and are further away from the heat inside the rail. So far no problems. Let me know if you have questions.
@tomgregory581410 ай бұрын
Unfortunately I totaled my 2020. Luckily I got a great settlement from my insurance company and replaced it with a 2023 SR. It too has no wire harness on the passenger side, so will be installing the harness in the same manner as the 2020.
@bradbenedict6034 Жыл бұрын
Thank you so much! I was able to easily walk through the installation with this detailed and informative video.
@LoCoZoMbiEKiLleR Жыл бұрын
This should be standard on all keyfob trucks @toyota. Hardest part for me was the stupid wiring clips and their orientation for the bed/frame and tailgate. Good video even if you move faster than I can. Thanks!
@ThePounder0012 жыл бұрын
Very detailed video! It was a big help to reference during my install on my 2020 Taco OffRoad
@sneekypete61602 жыл бұрын
Great instructions. It helped me instal one on my truck.
@toyotaco213 жыл бұрын
Thank you very much bud! just installed mine yesterday with confidence following your instructions and works great.
@MyTacoma3 жыл бұрын
Thanks 🙏 glad you liked it 🙂
@jbergado3 жыл бұрын
Best instructions ever.
@MyTacoma3 жыл бұрын
thanks
@tommisera38163 жыл бұрын
Great video, you make it look easy. It looks like a fun project and something that is doable for anyone.
@kenni4112 жыл бұрын
Excellent video ! Best one yet explains step by step ! Thanks brother !
@Donorcyclist3 жыл бұрын
Just finished my upgrade. Thank you for the assist!
@MADHIKER7773 жыл бұрын
Thank you for this very clear instruction! I'm using it as my guide for my own installation on my Tacoma.
@jeff_doyle7 ай бұрын
Thanks for this video just did the install
@tomrhoton74523 жыл бұрын
Thanks - nice job.
@robertprichard32363 жыл бұрын
Great video installed mine today and it went great
@marshallboutilier7462 Жыл бұрын
great video. But we could do with out the music its distracting..
@kenstogie3 жыл бұрын
Yes this is the best video for this..... is the harness long enough for a 2 door (+ the 2 suicide doors) ? Ie is it the same kit for an extended cab? Thanks for the video!
@theloneviking91453 жыл бұрын
Yes I believe so. Even though my kit said short bed I have the access cab long bed and there was plenty of wiring.
@TA-bb4cr2 жыл бұрын
Thank you. Quality video with clear instructions!
@MarioV733 жыл бұрын
Awesome video, thank you. But the music is horrible. I have to turn the volume up and down to hear the instructions and avoid the blaring music. Please rerelease the video without the music, or if you have to have the music, just keep the volume constant and low in the background.
@MyTacoma3 жыл бұрын
Noted! sorry about that , I released a new video about bed extender bracket music is low on that one.
@jsurfslammer3 жыл бұрын
I have to agree with the other comments wow you are great at doing and explaining the how and why. After watching the video oh yeah “subscribe”, I have a new Tacoma and there are a lot of mods I want, but all stock, but wanted to save not dealer install, “do it yourself”.
@slickricktheruler6 ай бұрын
Great how to video. Thank you
@TheRogeliofigueroa3 жыл бұрын
Thank you easy to install less than one hour and work great
@julestrdprodjimavicpro28693 жыл бұрын
nice video man and great choice of trucks!
@MyTacoma3 жыл бұрын
Thank you 🙏
@andrewmunczenski3632 Жыл бұрын
Just a note on my 24 I had the factory led under lightning. I had to cut the existing plug to remove and put a small slit and cut the harness new rubber plug to accommodate the factory led lightning.
@vandalus033 жыл бұрын
Great instructions. Thanks
@kjohnston12313 жыл бұрын
Will this work with 2021 SR Double Cab Short Bed? I called dealer today and he said they don’t have a part for this model yet. I think he’s mistaken?
@GrahamHolmes Жыл бұрын
How did you seal up the hole where you removed the grommet? I am worried about water getting in
@MyTacoma Жыл бұрын
Harness have the seal to cover up the area
@GrahamHolmes Жыл бұрын
Thank you
@eileenhunter59272 жыл бұрын
Is this the same for a 2022 Tacoma TRD Off-road long bed 4x4 with heated seats? I understand the heated seats may complicate the install. Any instructions for us on that? Additionally, an employee at our dealership said that you can't have both the power tailgate lock and the bed lighting kit. He said we will need to chose one or the other. That makes no sense to me as they don't appear to be related or wired in proximity to each other. Can you clear that up for me? I have not seen any mention of that and I know installing the bed lighting kit is a very easy plug and play install. Thank you.
@MyTacoma2 жыл бұрын
I have both on my 2020 Tacoma, it’s totally different wiring. It’s should be same for 2022 Tacoma , just make sure u order the right harness for long bed.
@kJ-hx8pm3 жыл бұрын
I got mine from toyota and it's a little different than. I installed it but when Iock it it's and when I unlock it it lock. Any advice
@MyTacoma3 жыл бұрын
Just double check ur work at tailgate gate remove the panel and record the video while locking and unlocking
@derekpalodichuk68973 жыл бұрын
Just need some glow sticks for the music. Great video, very informative.
@ceeIoc Жыл бұрын
I just did this. Before you remove the factory clips, note which way it is inserted. The hardest part was these clips, they were a very tight squeeze.
@weeweed86 Жыл бұрын
Nice job with this How-To....
@boriquianpapa3 жыл бұрын
So if the Tacoma comes with the keyless entry and you set all doors to open from the drivers side instead of just the one door set from factory will the tailgate unlock as well? Or is it just with the key fob?
@MyTacoma3 жыл бұрын
Yes it will unlock from drivers door when you install power tailgate lock
@mmwjade072 жыл бұрын
Excellent video and instructions!
@jtalonrider4769 Жыл бұрын
Works in a 2022 trd off road? And you have a link? Great video too
@zacharycornman977 Жыл бұрын
Thanks for the video, very detailed.
@adanleon40552 жыл бұрын
exelente ayuda . agradecido te tu explicacion muy detallada y precisa.
@hdwoodshop2 жыл бұрын
Do any of the new Tacoma trims come with this already factory installed? Great video
@jorgercabanrios85462 жыл бұрын
Great !!! Do you have the part number available? I have a 2021 TRD OR. This will be a great addition to my truck !
@tuequang90192 жыл бұрын
Just did my , thank you for video tips
@POGIAKO62 Жыл бұрын
Is it the same kit and installation as 2022 Toyota Tacoma OFF ROAD? Also, my truck is manual transmission (no key fob, just the regular key with remote door lock/unlock). It is my very first truck and I’m novice about trucks and still learning. U
@nihsmik Жыл бұрын
Not sure if you pulled the trigger on it but it's the same install process. I just finished it on my manual tacoma. You just gotta buy the right part (long bed or short bed).
@jamesesguerra233 жыл бұрын
the best
@MyTacoma3 жыл бұрын
Thanks
@trev0or3412 жыл бұрын
Thank you!! Very Very helpful.
@chengcalvinlee Жыл бұрын
Very nice, thanks for the video. Do you mind sharing the purchased links?
@chrisdelorey40433 жыл бұрын
Great video! That same body plug on my 2021 Pro has wires coming from it so I guess I’ll have to pick a different spot.
@7arsenal3 жыл бұрын
Did you try running it through the same hole or did you find a different spot?
@chrisdelorey40433 жыл бұрын
@@7arsenal I ran it through a different hole. If I have time, I’ll try to take a picture and post it
@7arsenal3 жыл бұрын
@@chrisdelorey4043 Yes please do. I’m debating whether to buy it because I don’t want to struggle with the installation.
@chrisdelorey40433 жыл бұрын
@@7arsenal The overall install was a breeze. This hole difference was the one hiccup but finding a new spot wasn’t difficult. I’ll look tonight and let you know where I ran it
@7arsenal3 жыл бұрын
@@chrisdelorey4043 OK thanks. I’m going to order it now. I have a 2018 double cab sport with long bed hope it’ll work.
@Kayak993 жыл бұрын
I have a 2020 TRD OR and while some of this works fine there is already a wire going thru the grommet under the seat. How is this resolved? Cutting into one of them?
@Rybay3 жыл бұрын
I just cut the one off that came already on the wire and then cut the side of the one already in the truck. I added silicone around it and followed the rest of the video. Took under an hour.
@hzdavid712 жыл бұрын
Thank you for this video
@juandelgado90713 жыл бұрын
Great video ! Where do you get the parts, can you post the link of the part .
@zeak6173 жыл бұрын
Yeah. I tried looking online and am getting a lot of different hits. Can you share the link or OEM number?
@zeak6173 жыл бұрын
Found it further down the feed. Thanks
@Pearsonc33 Жыл бұрын
Thanks for the video my Box came with no instructions
@beaucrawford5382 жыл бұрын
does anyone know if this will work on a 2018 tacoma ? i don't know why it lists 2019-2021 as the years
@lukegreeley10563 жыл бұрын
Can you provide the link to the product??? Thanks!
I broke one of the new wiring harness protector clips during the install. Does anyone know where I can get one for a decent price?
@jrmusan2 жыл бұрын
I would have enjoyed this video a thousand times more without this music
@GraV212 ай бұрын
Great video, just can’t stand the music. Video would have been perfect without the music but it was still good. Thanks
@gzombek3 жыл бұрын
Do you have the Amazon link for a 2021 Tacoma.
@7arsenal3 жыл бұрын
Part number?
@MyTacoma3 жыл бұрын
Part number #pk3b6-35js0 this is for short bed 5ft . if u have long bed parts number maybe different
@TomWalterTX3 жыл бұрын
@@MyTacoma PK3B6-35JL0 Tailgate Lock, Remote, Super Long Wheelbase is what I used for my 2021 DCLB (Double Cab Long Bed)
@Steav_003 жыл бұрын
Best video for this minus the cheesy 80’s porn music
@Cr0sby873 жыл бұрын
Does this work with 2018 models? Toyota says no, but what is different about 2018 vs 2019-current that would make this not work?
@MyTacoma3 жыл бұрын
Possibly pcm ( computer) is different not to sure. And it may not have same connector . If you see Same connectors Behind kick panel like showed in the video then it should work.
@Cr0sby873 жыл бұрын
@@MyTacoma connectors behind the kick panel look exactly the same, I'll be ordering this kit soon. Thanks!
@carivros2 жыл бұрын
@@Cr0sby87 Did work/fit for your 2018 Tacoma?
@Cr0sby872 жыл бұрын
@@carivros it works great on my 2018. Tailgate locks and unlocks with the passenger doors. Open the passenger kick panel to make sure your connections look like the ones in the video and you should be good to go. Took about an hour to install.
@IdreeceAhmad3 жыл бұрын
Hands down best lock install video. The STUPID music that kept going up in volume was senseless and annoying. Please get rid of it. Thanks for the video. Very informative.
@MyTacoma3 жыл бұрын
😆 sorry I’ll I don’t know how on uploaded video
@IdreeceAhmad3 жыл бұрын
@@MyTacoma yeah, finally looking at your video and installing my OEM lock. Cant mute the damn music - so friggin loud too, because then I will miss what you are saying. Thanks for the video.
@ageguy50903 жыл бұрын
Pop n Lock $80.00
@paulatreides35132 жыл бұрын
What part # did you use for this?
@erk-13 жыл бұрын
Is this an OEM product?
@MyTacoma3 жыл бұрын
Yes
@xylianis082 жыл бұрын
Help please when i hit lock buttom all the truck does is beep
@MyTacoma2 жыл бұрын
It won’t lock? Since u installed the tailgate lock?
@xylianis082 жыл бұрын
@@MyTacoma i got it lol one of the rear pax doors was open and it would not lock just long beep lol. Great video thanks
@robertbaskett84562 жыл бұрын
Good video, music is annoying as all hell...
@boogiewarren69073 жыл бұрын
The music makes it almost unwatchable.
@tachoma84933 жыл бұрын
or you can get an actuator for under $10bucks?
@cnw-jd9tt2 жыл бұрын
I lost my clavis….
@cristoffmaximus7484 Жыл бұрын
Great video, terrible music
@JM-mo2bx3 жыл бұрын
Maybe turn off the ultra annoying techno music?
@7428marcus2 жыл бұрын
I hate the music
@kevinrconway2 жыл бұрын
Ok video ruined by terrible music.
@theloneviking91453 жыл бұрын
I tried to watch it to the end but that aggravating music fading in and out in and out was wearing on my nerves. Otherwise it was a great video too bad I couldn't finish it.
@reedallidap71733 жыл бұрын
That music was horrible
@MinhNguyen-gd7bt Жыл бұрын
On 2023 trd pro what part number I need to order?
@huladick2 жыл бұрын
Great video. Thanks
@ShootingSportz3 жыл бұрын
Thanks for the informative video! I am waiting for my kit to arrive in the mail, and I am bookmarking this video!
@MyTacoma3 жыл бұрын
Thanks 🙏
@tedchan4425 Жыл бұрын
any tips on the "clevice" install - i pretty much did the same as you - used my fingers and pushed down with a screwdriver - i believe it may have popped off as i hear the motor running but its not locking or unlocking now.....seems like a flimsy design imo - thx!