2019 Yamaha Grizzly se xtr and accessory review

[@stepheng2301]

Awesome video. Saw your post on a Grizzly Facebook page. I have a 2021 XTR (Green). I’m extremely jealous of the blue color on yours. Looks great!

[@Solly937]

I switched from a can am outlander to a ‘22 Grizzly. Couldn’t be happier with the reliability. I didn’t like the brush guard due to the fact that plastic needed to be removed for installation. I bought the factory matching windshield and very durable. My only complaint is with what you already pointed out, the splash back from the front tires. I have 4600 km on it after 7 months of owning it now and zero issues.

[@kennykinder4706]

Looks like there's plenty of sharp edges and metal corners to contend with. Especially in an unfortunate event of a rollover. Ride Safe Fella!

[@stoneskulloffroad6792]

I should have mentioned that my splash guards are made of plastic and that I zip tied them on so if they get catch on something they will rip off without tearing anything else up.

[@andrewinsinga2993]

I use pro taper pillow grips I put them on every machine I own!

[@northerntoyota7584]

I have a 2021 se in the green/black combo ( 🇨🇦) and I also put the Yamaha flares on. My rear floorboards are getting beat all to crap by the rocks flung by the front zillas. I had some rubber inner tube pieces cut and made little mudflaps.

[@stoneskulloffroad6792]

I got mine early spring and the front tires threw allot of slush into the footwells so I put the mudflaps that I made from a rubber floor mat on it. guess I prevented the rocks hitting the floorboards before it happened. The plastic i put on to connect the overfenders is under the floorboards now too.

[@avanluven]

I have the base Grizzly with the crappier tires and I already notice my floorboards getting beat up by stones.

[@stoneskulloffroad6792]

@@avanluven I havent noticed any damage to my floor boards but I also have the overfenders, mudflaps and the extra splash guards that probably prevent it from happening.

[@Den-nu6pv]

How did you mount the gas can

[@stoneskulloffroad6792]

I got it off Amazon. It came with a mount that has a couple U-bolts. I mounted it to the rack with the hardware provided. It holds tight and no leaks. a.co/d/iNgSotD

[@rodneymiracle3224]

Wondering if you plow snow and if so does the front brush guard affect your plow blade at all

[@stoneskulloffroad6792]

No plow for me.. I have a couple johndeere garden tractors for plowing and snowblowing. I had a plow on an old kodiak but the johndeere has allot nicer controls.

[@charlie83blue3]

Hello what psi you keep your tires pump for ?? Thanx in advance

[@stoneskulloffroad6792]

I keep them at the recomended 5 PSI.

[@SergeRobichaud-oq9wu]

oh man its hilarious watching this at playback speed 0.25

[@jessecameron7268]

I hope you never put that atv on its side with those splash guards, you might be missing a foot or lower part of leg being chopped off.

[@stoneskulloffroad6792]

The splash guards are plastic and ziptied on. They shouldn't do any more damage to a person than the plastic body panels.