2023 Yamaha Grizzly XTR MOD and Accessories and all Model Numbers.

[@MrKmd27]

Your light bar is the nicest that I have seen. Beautiful install.

[@TheCallfam3]

Thank you I appreciate it. Some videos coming soon. I just got home.

[@garykarnes6514]

Light bar is stupid and not needed

[@AlphazuluH2K]

Clean setup!!! The best looking grizzly on YT👍🏾

[@TheCallfam3]

Thank you I appreciate.

[@adean7617]

I'm on the market for a new 2024 grizzly, but since I've been looking around; that 2023 is the best looking color scheme that I've seen. Nice seat too buddy thank for this video.

[@vincenzoizzi5407]

I'm actually getting a 2025 black and grey

[@cwinsor3085]

Thank you. I was so pissed when I couldn’t get the hand guards on. Just ordered these mounts.

[@TheCallfam3]

Awesome I’m glad they make them. Lol thank you for watching

[@brennenlee7715]

Nice looking set up! The box looks good with the 23 xt-r color, kinda ties it all together

[@TheCallfam3]

Thank Brother

[@devrow42]

Found ya on the Grizzly page, Like the style short and sweet and to the point, Just picked up my 23 SE and will be grabbing that light bar and E tip and those bark busters. Keep it up!!!

[@TheCallfam3]

Awesome thank you for watching. I believe the next video will be “Top Speed”

[@thepdc6220]

Can’t find the light. Seems they aren’t on Amazon

[@TheCallfam3]

Yeah looked the other day and it is definitely not there. I’m sure there is something that resembles it somewhere. If I find something I’ll let you know.

[@thepdc6220]

I found a better one. $56

[@TheCallfam3]

@@thepdc6220 awesome I’m glad you found one

[@kb8yct]

Great job mounting the lights. Good location.

[@TheCallfam3]

Thank you very much I appreciate it.

[@benmayhew373]

Good job! The light bar is perfect were you have it for sure and ya gotta love the 2r tip. 🍻🇨🇦

[@TheCallfam3]

Thank you. I appreciate it. I like the clean look. Thanks for watching.

[@lcdubs7847]

Good job on that light bar. I've been wanting to put some like on my Grizz, and I think I'll go that route too.

[@TheCallfam3]

Awesome thank you. And thank you for watching. I have some more videos coming soon.

[@JB-57]

Sweet setup bud! EHS also has an air box setup that should help the grizz run a little cooler, especially paired with the EFI controller. I plan on doing both sooner or later. Great video! Ride safe man 👍

[@6gatornation]

some nice add-ons I appreciate you sharing I just bought the exact same one at the local dealership it was the 2023 they had They had a discounted at 9K Then they gave me another 500 off It was sitting right next to a 24 That they were selling for 11400 Said they're trying to make room for some more 24 Hell I guess the 25s will be coming out before too long i'm definitely getting the 2rracing Tip exhaust tip on the factory muffler is a joke

[@TheCallfam3]

Thank you I appreciate it. Awesome deal for the 2023. I believe mine was like 12600. So far I love mine. I just did some videos. I just need to edit and upload lol. The 2r racing tip definitely gives it that distinguished sound for sure. Thank you for watching more coming soon.

[@SmarOneNine]

Have you done anymore upgrades to the wheeler? Still curious what those rock lights look like at night ? Just curious cause i havent seen any new videos in some time on your channel. Unfortantley Alot of your accessories model numbers i cant seem to find anymore 😥 , If you live close to maine you should come help me do some upgrades on mine lol. take care.

[@TheCallfam3]

lol. I would love to come to Maine but that would be a drive. Lol. I’m in South Carolina. I have not done any more accessories on it, but I have some videos that I have to put out. I have been gone for a while for work and all that, but I plan on pushing it a little harder soon. I’m glad you told me about the rock lights at night. They are pretty cool and especially if you are the leader on the trail, they know where you are.Lol. So far all of the accessories that I have on my four wheeler have done really well. I know some of the model numbers may not exist anymore, but it could at least give some ideas on what people would want especially the light bar for some reason. It must’ve just sold out as soon as I posted this video, but I’m sure that there are light bars somewhere out there they kind of look like it.Lol

[@SmarOneNine]

@@TheCallfam3 Nice! we have some pretty good trailing up here in maine and Im sure you do as well , I love the XTR grizzly but unfortantley wasnt able to find one around the time I was looking to purchase a grizzly but I did find the SE model and purchased that which I really like it I just like the color combo a little better on the XTR model but Im happy with mine , The first upgrade I did on mine was the Grizzly 700 Front Brush Guard on yamahas website it looks great on the wheeler you should look into it...Also replaced the handgrips to the ODI Rogue Lock-On ATV Hand Grips which look awesome. And a few other small cosmetic things! This video really helped me with some more ideas for mine , Appreciate it.

[@juannegrin7106]

Nice color love grizz,,,

[@michaels8775]

Can't find headlamp Led on Amazon guess I'm stuck with halogen great vid

[@TheCallfam3]

They might be out of stock on them right now. I’ll look

[@michaels8775]

@@TheCallfam3 tysm

[@ArcticExploring]

Really good information here, and cool Accessories you got there 🙂

[@TheCallfam3]

Thank you. I appreciate it.

[@damianwhitchurchaird9518]

Hey nice rig!!! Any chance you could let me know the interior dimensions on the rear cargo box

[@TheCallfam3]

yamaha-motor.com/p/atv-cargo-boxes

[@rjmetcalfe1532]

nice rig! what website did you get the handle bar top light from?

[@TheCallfam3]

Thank you I appreciate it. Amazon is where I found it from.

[@Paul-zd4mc]

Sweet ride ! Do you have any info on the light bar mounting kit, it’s the nicest one I’ve seen,thanks

[@TheCallfam3]

Thank you I appreciate it. a.co/d/icK0NIu

[@dangibb8046]

I love all those accessories.. do you have a link to any of them in amazon?

[@TheCallfam3]

I don’t have link for all of them but If you search for the model / part number it should pull up. Hopefully they are still in stock.

[@dangibb8046]

Ok no worries.. thanks for the response

[@BC_Hunter]

Man does that paint chip like crazy under those wheel wells!

[@TheCallfam3]

Yeah under there it does chip. I believe I’m going to just pressure wash under there and make it all black. But the rest is great.

[@BC_Hunter]

@@TheCallfam3 Just ordered the same quad: thinking I may plasti dip the underside black.

[@SuperDave-pe1zw]

​@@TheCallfam3 that's what I did, flat blacked the inner fenders. Mine is a 2021 camo model and it didn't have much camo under the fenders. I put a 8" single row light bar under my front rack and wired it to the handlebar light so I can still use my rack and the top light just shines off whatever you have on the front rack and it's pretty worthless anyway. Nice quad.

[@elcorne76ify]

Was your light mounts stock number

[@allenstratton]

Could you tell me the model number for the light bar mounts,i think that you left that out in the video, unless I missed it...ty

[@TheCallfam3]

a.co/d/3YSDgZc

[@oneeyedtodd]

Hi, just wanted to ask what mounts you used for the powermadd handguards. Thanks!

[@TheCallfam3]

I believe this is it. PowerMadd 34269 Star Series / Trail Star Handguard Mount Kit - Tri-Mount a.co/d/iADv1NC

[@SmarOneNine]

Do you have to have the ehs tuner if you put on one of those 2r tips? or can you put a 2r tip on and everything is good. Thanks

[@TheCallfam3]

You do not have to have the EHS tuner to have a 2r racing tip. It will help a little bit with the sound and give it a little more air flow. You can put it on and everything is just fine with out tuner.

[@SmarOneNine]

@@TheCallfam3 Ok Thanks Man. Did you ever do a EHS on yours?

[@TheCallfam3]

I have not done it yet. I plan on doing it soon though.

[@brennenlee7715]

How is the driving visibility with the led replacement bulb ? Better/worse/same ?

[@TheCallfam3]

It is better visibility. It’s definitely not worse. Lol. I think the light bar helps out allot more than anything.

[@danielsypult8998]

Cool video! Im struggling to find the light bulb online from that part number. Can you provide a link?

[@TheCallfam3]

HONLEEX 2pcs AC9-48V P15D H6M LED Motorcycle Headlight Bulbs 1800LM Super Bright 4xCOB Chips High/Low Beam LED Lamps for Yamaha,ATVS YFM350 450 400 660 700 Raptor.Xenon White.6500K. a.co/d/a6eordB

[@adamperry1724]

Dude, awesome set up! After watching your video I immediately bought the handgaurds with the special mount bracket. I'm considering the 2r tip on my '22 XT-R. Are you still liking it a lot? Did you by chance look into any full muffler replacements? Im not having much luck on that front.

[@TheCallfam3]

Thank you I appreciate it. I haven’t really looked into the muffler yet. I believe the next thing I’m going to do is the tune. I am glad I could help at least give some ideas. Lol.

[@adamperry1724]

@@TheCallfam3 Absolutely! I'm new into this so forgive me when I ask, what is the tune?

[@TheCallfam3]

EHS tune Store.ehsracing.com it will wake the grizzly up lol. Easy to install. And it is supposed to be better for the machine after you do it. It helps it last longer and gives it more power.

[@adamperry1724]

@@TheCallfam3 Sounds like something else I'm going to want to do, lol. Thanks for the info! Keep on sharing your mods, I've got the same fourwheeler and love what you've done!

[@TheCallfam3]

Thank you I appreciate it. More videos coming soon. Lol.

[@TM-fd4tm]

Can you tell me the manufacturer from lightbar??!

[@maxboo1]

The Yamaha rear boxes are great but the lid only has half hinges so if enough force is put on either front corner the lid comes off. And by enough force I mean not very much.

[@TheCallfam3]

Yes I agree with you. I just purchased a small trailer Lock to put in so I know it won’t come off

[@FriendandfriendKyle]

What light bar and light bar mount is this? Can you provide the part numbers?

[@SmarOneNine]

watch the whole video he does supply the model numbers

[@TheCallfam3]

I am not sure I’ve seen the light bar lately but I do have a video that has all the model numbers on all the accessories I put on there. Most from Amazon.

[@vincenzoizzi5407]

do you use a product to keep your grizzly so shiny if so, which one? thanks

[@TheCallfam3]

Yes I do. First I obviously clean the machine really good. I use purple power for all the black and tires. Armor all tire foam for the tires and I use slick product shine or SC1. For the body and plastics. a.co/d/3r2M78H a.co/d/2VSfbgl

[@robsnyder3733]

Can't help to notice the paint pealing off in the rear finder well area

[@TheCallfam3]

You are correct. I have basically removed all the paint. It is pretty much all black now. Lol. It looks a lot better than chip paint. I took the pressure washer to it and it came right off. Everywhere else is great.

[@thepdc6220]

Need some more griz videos

[@TheCallfam3]

I’ll be back I had to go out of town. More videos coming

[@adamross6388]

Just bought the same grizzly but cant find the light bar. Have a link?

[@TheCallfam3]

Sorry I’m just now getting back to you. You are correct. They are out of stock on that light bar. I did find the 7 inch that is blacked out. But you may want to wait on the “blacked out 10 inch. It looks like they have the yellow 10 in. This is the same brand. SUPAREE 7 Inch Led Light Bar, 30W 5000 Lumens Light Bar for Truck Off Road ATV UTV Boat, 12 Volt Led Flood Lights Work Light Auxiliary Driving Fog Light with Mount Bracket - 1 Pack White a.co/d/9fK3uNj

[@rxdrrx68]

​@@TheCallfam3could you put what rackmounts you used for that light bar?

[@Alexb_1775]

Hey what powermadd brackets did you choose for your hand guards?

[@Alexb_1775]

Tri mount.. sorry!

[@TheCallfam3]

Sorry it took so long I have been out of town for a while. I have the model number in this video. I threw away all the boxes. Let me see if u can find it

[@TheCallfam3]

a.co/d/bweoSsG

[@andrewbullard9958]

Who is this guy? Lol nice setup

[@TheCallfam3]

What is up Andrew I appreciate it brother. Thank you for watching.

[@Appytail]

Fuck !!! that "Sand" paint is already all peeled off !!!

[@TheCallfam3]

Everything else is great. I figured it would chip down there a little bit. I believe I’m going to pressure wash it all and make it all black.

[@tysonoovayuk8663]

What's the name of the LED Light Bar and name of the mounts?

[@TheCallfam3]

a.co/d/ca9dImD

[@TheCallfam3]

The light bar may be out of stock.

[@tysonoovayuk8663]

@TheCallfam3 what's the name of the mounts?

[@TheCallfam3]

I just sent you the Amazon link above. Tap on that link and it will go straight to them.

[@denniskuenze659]

Where’s your helmets?

[@StarknightMT_official]

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your KAWASAKI TERYX 800cc 4 (if your car year is 2013-2023

[@TheCallfam3]

I would love to but that particular unit is not mine. But I do own the Grizzly and 3 other quads. I may have a side by side coming soon.

[@StarknightMT_official]

@@TheCallfam3 Hi, great! Let us know then!

[@TheCallfam3]

Ok sounds great. Thank you

[@SuperDave-pe1zw]

Save your money 💰, don't buy a EHS tuner, they do nothing for newer grizzlies except make them run rich and like crap. I put one on a new 2021 grizzly and new kodiak 700. Both turned to instant turds !! Grizzly Central guys said the same thing. Different muffler maybe 🤔 I don't know but even Eric says doesn't do anything for a stock grizzly.

[@TheCallfam3]

That’s disappointing. Any other tuners that you know of? Or anything that could wake up the Beast? Lol

[@SuperDave-pe1zw]

@TheCallfam3 oh if you Google it you can find companies that will tune or remap you factory computer and there's a few companies that sell programmers but I don't know how good they are??

[@bassiclogic]

Your audio is set to low!

[@TheCallfam3]

Lol I know. I will work on that.