Unboxing and installation of a full titanium Akrapovic exhaust system on the project 2019 ZX10R!
Пікірлер: 104
@TheDr.Magnum5 жыл бұрын
I don't even own a bike but these videos are awesome
@joeshuasamkevinvelasco38734 жыл бұрын
Soon you will brotha
@streetrossi72355 жыл бұрын
The exhaust sounds too good
@zikrihafiz34435 жыл бұрын
hey evan, you should keep your business this way because the way i saw you put attention to the details such like put that towel for not scratch i know that is common sense but many bikeshop does not care much about that. The way you put your work to those bikes are awesome you treat them much like your own bike. Thumbs Up man. Cant wait to see the draggy. hahahaha
@Patriot-fl3ch4 жыл бұрын
Love that exhaust! Not too loud, just right.
@user-oc4ce7zp2l4 жыл бұрын
That nice colour & sound!! From Japan
@MDZ77225 жыл бұрын
Keep doing what you Love it's only the beginning.
@aeror1155 жыл бұрын
Yehaaa nice exhaust! I’ve had a full system on my 10R too was expensive but with a power commander a really good investment! Ride safe with this beast
@clintoninc75505 жыл бұрын
Hey guys let help him grow his channel!
@tontoncabais71434 жыл бұрын
Lol
@DonGH2973 жыл бұрын
Love your video’s ! Sounds sweettt i’m about to install my full system on my zx6r
@jaybusa33025 жыл бұрын
Looks good. Cant wait for kawi to go with a full tft dash as the one on it now has never been favorite
@johnnyconley26334 жыл бұрын
EXCELLENT U ROCK. THANKS FOR THE KILLER TUNE. The movie ATOMIC BLONDE played same track.
@jternesto19815 жыл бұрын
Nice work! You know your shit.
@2lobih283 жыл бұрын
Still here after 2 years
@MrMigo0284 жыл бұрын
Best exhaust for perfomace, akrapovic is the best just dont like long can but they have shorty and it sound much better and louder! Shorty akra with link pipe for sound, pops and crakls :D
@damiendicks79995 жыл бұрын
Another quality post with great attention to detail as always. When you get to the airbox part of the build, would you mind going into a little extra detail as to how the heat shielding benefits intake air temps. I can't wrap my head around it (excuse the pun). It just seems that incoming ram air is coming through so fast and engine heat also being removed that any heat insulation benefits seem marginal, if at all. I can understand if the bike is on a dyno surrounded by heat, but on the road at speed it seems a tad moot. Please enlighten me and anyone else not asking the question. PS I'm quite conservative with likes and thumbs up. But I tend to spend a shit load of them on your content. Keep it up man. And thanks.
@Davemcmasters5 жыл бұрын
Maybe a harbour freight motorcycle lift in the future? Bike is sick!
@TheOriginalPyroBEAST5 жыл бұрын
Just put a graves slip on onto my 16 zx10r KRT 😍 idk I just like videos like this
@TheNdacurv5 жыл бұрын
Love the bike!! Keep the videos coming Sir!
@ShivaMySupreme4 жыл бұрын
I like the stock look but it looks great
@HOODBONEZ3185 жыл бұрын
Great job 👍🏾
@racingsfun5 жыл бұрын
You should uae a decibal meter of the before and after on exhaust mods on the bikes you build.
@MrGuerraTube5 жыл бұрын
Ejr i have installed already a few akra full systems on my bikes and my costumers... but on my first s1krr 2010 i found out that the arrow full systems can deliver much more torque ... i am telling you this because on the video you mentioned the characteristiques of the headers and specially the mid pipe... and the big diference for the arrow's is preciselly there... for you to imagine , akra full systems measure about 40mm (aprox) on the Double link of the mid pipe to the headers and 65mm ( aprox) on the connection for the end can... arrow's do 42mm and 63mm on the same spots... diferences are very noticeable i must say... but nothing better than you test it on your own... you won't regret...! Nice job there !
@bacchusthompson58345 жыл бұрын
Akrapovic started their R&D and sponsorship of Kawasaki at the introduction of the Gen. 4 ZX10R. So, the systems became better tailored for Kawasaki at that point. Prior to that Kawasaki was paired with Leo Vince. Through many many test, it is proven that for a Gen. 4 to Gen. 6 ZX10R, no other exhaust produces more power or torque than Akra does. I love Arrow, an amazing exhaust.
@jternesto19814 жыл бұрын
@@bacchusthompson5834 Would you know what the best aftermarket header for a 2020R1 would be to fit a 3/4 sc project crt low mount? Read a few of your comments and you seem to be well informed on exhausts.
@bacchusthompson58344 жыл бұрын
@@jternesto1981 This just my opinion... Graves or Arrow
@jternesto19814 жыл бұрын
@@bacchusthompson5834 Oh ok, I'm going with the s.c. crt 3/4 for sure..love the sound, do you know off hand which header will fit the 3/4?
@bacchusthompson58344 жыл бұрын
@@jternesto1981 not off hand... I know most reputable aftermarket Headers are around 60mm to 65mm. They should have the OD dimensions listed in the descriptions for the SC Project CRT 3/4 and whichever header you choose
@craigwilson55735 жыл бұрын
Nice exhaust!! Is that colour scheme standard?? Looks fuXXIng awsome!!!
@vasilisagrafiotis40455 жыл бұрын
Nice videos, whats your opinion on Arata full systems? Have you ever tried one?
@150to2005 жыл бұрын
Is this is the new colour of ZX10R or custom painted by you ?
@150to2005 жыл бұрын
@XD :p OMG. I am awaiting delivery of 2020 model. By July they may deliver. So this will be the only color option available ?
@150to2005 жыл бұрын
@XD :p thanks. I saw it in USA website
@ruimteschipYT5 жыл бұрын
awesome video i have also full system akra much better without kata and now it sounds like a beast i ride without db killer
@user-xh8kh1ly8v4 жыл бұрын
It sounds good, but where is the oxygen sensor in the middle pipe?
@samyu6754 жыл бұрын
nice job, but dont really understand. where is your o2 sensor ? did you need to tune?
@astu465 жыл бұрын
Can't go wrong with premium stuff
@jponz855 жыл бұрын
True, but your wallet 😬
@andonandonian78144 жыл бұрын
Is it possible to know the diameter of the pipes at the very first of the headers directly after the flanges that get to the head exhaust port gasket. Thanks. I wanna know which headers give best on low rpms for the zx10r gen 5
@ridepastu14183 жыл бұрын
How do you get around the exhaust header pipe (left side) so close to coolant hose. It practically touches pipe.
@rahulrajmohan79225 жыл бұрын
🤘Waiting for DRAGIESS🤘...😈😈 NICE INFORMATIONS...THANK YOU..💖
@DonGH2973 жыл бұрын
Those stock headers look really good. A shame it has the cat in it as it must be a high quality titanium piece. The akrapovic still is much better probably ;)
@tunaman445 жыл бұрын
I know you’ve answered this a million times but what’s the electric bit driver you use Wd40 works good for cleaning the titanium headers
@SaiVarmaPericharla_4 жыл бұрын
Does it need any remap after full system exhaust installation?
@mpowerlife18325 жыл бұрын
What do you think about shorty akrapovic is that bad and what about this pipe you just put on is it to big for that velocity
@ronran57553 жыл бұрын
Great vid, does the full system come with the header gaskets?
@DonGH2973 жыл бұрын
No it does not for the zx6r at least! Just received my full system and now i’m waiting for a new order with gaskets ;(
@raceaddict32125 жыл бұрын
Brock is gonna give u hell lol.
@Honda1k4 жыл бұрын
Goes both ways Brock's always make smart remarks about akrapovic
@vicfox1015 жыл бұрын
after the install did the check engine light come on? i just did the link pipe and muffler and it has the check engine light on constantly.
@6jtdi3 жыл бұрын
Evolution Line S-K10E9 or race line!? Whats diferente parts can help me?
@wajihalsaihati20595 жыл бұрын
Good job
@shh.grey15 жыл бұрын
EJR what's your opinion on a Graves Full System?
@VitzeePlays5 жыл бұрын
bro just wanted a suggestion is it compulsory to install pc5 if i install akra slip on and mid pipe on the 10r?
@jaymills854 жыл бұрын
You don't need a pc5 all you need is a ECU flash.
@jponz855 жыл бұрын
You should had done a quick comparison between the stock headers and how they look as opposed to the modded headers. I always feel like they're so similar and want to know HOW they actually provide better flow. Secondly, my question is: does this thing need a power commander after all those mods, or just taking it to get it tuned eliminates the need for a power commander? I have a slip on exhaust on my zx10r, my zx6r came with an akrapovic exhaust and a power commander when I got it used, I guess I'm asking when is it necessary for a power commander if you just have the canister or slip on. Thanks! Thumbs up btw
@Lucky_Logan4 жыл бұрын
Jeez I remember putting my full Akro I bought off of this 1 dude and the install was such shit. It was a 3rd gen Zx10r, I couldn’t pull the radiator very far forward so it cut my hands up pretty bad. But I bought the Full akro for $700, flashed. ECU for $200, and black gas tank for $150. I looped my bike so it was getting rebuilt and I came across that deal so why not? Went from restricted ECU and mid-pipe delete, M4 Street Slayer, to full Akro and Flashed/Unrestricted ECU. So made it go faster after the accident 😂😂 when you get a deal jump on it. But curiously, what would you say, I really want the Brocks Pentacarbon Exhaust, but Akro sounds amazing too. I know you said you choose Akro but would it big a HUGE difference between the Brocks or Akro??
@Lucky_Logan4 жыл бұрын
And what’s with the tappin of the rubber mallet? Just helps it seat better? I’m sorry I’ve commented on a lot of your videos of stupid questions, but I’m getting a 2019 here in a few months so I’m trying to get the best answers I can. I’ve had a 3rd gen Zx10r before, and I haven’t had anything like super sport since that and that was 2-3 years ago. I had an FZ09 and DRZ but now bikeless. So I do apologize for all the comments. I don’t mean to be annoying bud.
@kawosz903 жыл бұрын
any difference between titanium and steel, besides weight?
@carlgill59465 жыл бұрын
So does that akra can have a removable DB killer? I think I heard you say it does and if it does was it out? Man it's quite! I am running a Austin racing 3/4 but the can or muffler had 3 different noise levels meaning it has 1 removable DB killer on the end and a thick insulated baffle on the other end , I've only ever removed the DB killer because it's already to loud just running it that way. Everyone seems to love the looks and sound of it though, maybe in the future you could try it on a build Evan? The qaulity seems to be top notch too. Anyways I'm totally rambling my bad !! That bike is going to be a killer for sure!!
@frankleague32724 жыл бұрын
Where does your passenger put there right foot at?
@user-id1ju2mo1z2 жыл бұрын
Does anyone know where to buy this clamp (CZ39) ??
@benschul69344 жыл бұрын
Does the exhaust alos fot on the 2011 zx10r?
@haksai4 жыл бұрын
did you have a engine light?
@exodusfivesixfivesix80505 жыл бұрын
This ninja specialized in panty dropping jsutsu at the ninja academy. Such a sexy bike.
@amirulhaziqx5 жыл бұрын
Whts the intro song dude ?????
@shh.grey15 жыл бұрын
What is actually the best system for a 2016+ zx10r
@tunaman445 жыл бұрын
三神嵐 just the stock titanium headers with a good pc5 map
@sandeepKumar-sp7qg4 жыл бұрын
When your getting titinum headers by factory. Why aftermarket
@michaelperez74725 жыл бұрын
nice
@jay-yv7rv3 жыл бұрын
i have a 1gen with full akrapovic exhaust. 🐝 🐝 🐝 🐝
@SaWuDOHC5 жыл бұрын
akra-pouuviiickk lolololol
@jainoor5 жыл бұрын
Hello, do you want to sell the pillion footpegs and the seat?
@tatuksa5 жыл бұрын
you removed the titanium headers and install again a titanium headers ?
@EJR-Performance5 жыл бұрын
Believe it or not... material type doesnt make HP. Design does.
@tatuksa5 жыл бұрын
but the stock headers was titanium and was good designed the best thing is just pot slip on
@EJR-Performance5 жыл бұрын
@@tatuksa wrong
@tatuksa5 жыл бұрын
Tri-State Racing correct me please
@bacchusthompson58345 жыл бұрын
@@tatuksa if you're on a budget, then yes the stock header with a slip-on along with a link pipe to delete the CAT is about as good as you can get. It will in no way at all out perform a Full Akrapovic Exhaust. Primaries are bigger and stepped. The Venturi collector is incorporated into the exhaust to take full advantage of those very differences between the STOCK Header & the Akra Header for optimum extraction of exhaust... It creates a vacuum effect to increase velocity of exhaust extraction. The Akra Full System is also lighter than the Stock header w/slip-on & link pipe.
@Eddycarm5 жыл бұрын
Is the oem steering stabilizer garbage ?
@EmergencyMoto5 жыл бұрын
Eddy Carm I also want to know about this what’s wrong with the electronic online s steering dampener
@parthasarathy54505 жыл бұрын
According to u which pulls more hp akra or Brock's and it has stock titanium headers u replaced it? Coz u can attain more performance?
@bacchusthompson58345 жыл бұрын
Stock header is good from factory. I would say it's the best OEM header of any of the other sportbikes from factory hands down. It's just not better than the Akra system. The primaries are smaller, it's stepped (but not nearly as well as the Akra), and as EJR stated the Venturi Effect that Akra incorporates into the system puts it into an entirely different category. If you're on a budget and couldn't afford a Full Akra, a slip-on w/ a link pipe to delete the Cat and the STOCK header on a Gen. 4 to Gen. 6 ZX10R is pretty much on par or maybe better than any other aftermarket Full System. It's just not as good as the Akra though.
@parthasarathy54505 жыл бұрын
@@bacchusthompson5834 which muffler puts morr hp mate akra or brock ?
@bacchusthompson58345 жыл бұрын
@@parthasarathy5450 Brock's Performance in my opinion would make more peak power as I feel that the systems are designed for that reason based on Brock's Drag Racing focus. I think the Akra makes more power through out the power curve where it's usable by everyday riders and probably doesn't make as much peak power (I don't think it's anything crazy like 3 or 5 horsepower less though). This should put into perspective for you... You don't see any WSBK or MotoAmerica bikes running a Brock's System do you?
@parthasarathy54505 жыл бұрын
@@bacchusthompson5834 thanks for reply man
@a04a275 жыл бұрын
likes first watch later
@DirtyGarageTx5 жыл бұрын
Sweeeeeetttttsoinds good
@simonturner28675 жыл бұрын
Another great video! What power is the bitch ninja putting out with all mods?
@shaanusingh7774 жыл бұрын
Need your advice I am planning to install akrapovic full system on my 2019 hayabusa +air filter So pc5 and ecu remap are also necessary along with full system or air filter is enough
@markjackson76504 жыл бұрын
You will need to adjust the fueling if you change the headers. It'll run lean and just shitty in general. You can either go the power commander route or have the ECU flashed directly. If you want the option to return your bike to standard get a power commander.
@tunaman444 жыл бұрын
all i care about is the bypass for the rave of warning lights i get for disconnection of the baffle, show it next ttime
@Zx10grant2 жыл бұрын
I need helppp
@nii86945 жыл бұрын
😢😢😍😍
@billyu7925 жыл бұрын
Are you an engineer?
@carlgill59465 жыл бұрын
He'll be loving this question! Lol
@flyinryan56145 жыл бұрын
How can I send my ECU to you?
@EJR-Performance5 жыл бұрын
Message me on instagram or facebook. EJR performance