2020 2021 Kia Telluride LED Headlight Upgrade Lasfit

[@dairs2064]

Thanx man. Inreally needed that. I am going to purchase some. I just think in 2021 everything should already be factory LED no more yellow bulbs.

[@TonyTheTechnician]

Glad you enjoyed and ya I agree 👍

[@Tamohawk360gorilla]

I know this vid is old but this looks so easy. Was about to sell a kid for the replacement cost.

[@cpamaxx]

Hope you can make video too for 2024 KIA Telluride, thanks

[@toddmcfadden1697]

Are the bulbs a dual element to have both high and low beam? I can turn my high beam on and nothing changes

[@karlagonz9659]

My high beams don’t work? Do you think it’s the bulbs? Could it be the fuses? Could you help me figure out which one is it. Please!! Thank you

[@CamberRockerCamber]

I got a question, and this might be a stupid question, but when the bulb burns out can I replace just the bulb or would I have to buy a whole new conversion kit? From that video it looks like the bulb and kit are a single unit. Let me know if this question makes any sense. :(

[@TonyTheTechnician]

The bulb is simply plug and play. Not external unit. If the bulb goes bad just replace the bulb

[@mr_handsome2you]

That's a great question

[@nakram55]

Hi Tony, thanks for your amazing video, I would like to ask you if you had experienced any hyperflashing with this type of led? Thanks in advance

[@TonyTheTechnician]

They actually stopped selling this as a blinker for the telluride bc of the hyper flashing. They said they were working on a new one but have yet to see that. I started to get hyper flashing after a couple of days. Then after about a week of it doing that, I was about to get rid of them and they just started working properly. So I would love to say this is still a product I highly suggest but unfortunately I don't want others to deal with the same possible issues. I need to do an update on this video actually so thank you for the reminder. They make amazing lights for sure but as far as this specific application they realized the issue and removed it as an option for the telluride.

[@feistyoldgal8257]

Have you done the adjustment video yet? Couldn't find it.

[@TonyTheTechnician]

No not yet. The easiest and best adjustment to make sure lighting is correct is to just turn the bulb inside the sleeve to make sure you get the best lighting effect. But I will have the actual adjustment out soon

[@LyftedDieSeL_Wv]

So I put these bulbs in my girlfriends telluride they work on low beam but don’t change when switched to high beam and idea ?

[@TonyTheTechnician]

Well it's not the bulb. In the telluride they use a projector style headlight so the bulb is always on 100% brightness. The headlight assembly just has a lens that covers the top 30% of the light coming through the projector. Then when the brights are activated all it does is move the cover out of the way allowing all of the light to pass through the lens. So either that isn't working or you have the bulbs aimed to low which would just allow all of the light through all the time. Try rotating the bulb while pointing them at the wall and make sure you can see that clear cut off line of the light on the wall

[@tonyk7ng1803]

Do you just need 2 bulbs for low and high beam, or 4 bulbs(2 for low and 2 for high)?

[@TonyTheTechnician]

Just 2 it's a projection style on these and the assembly cuts off half the light until you hit the brights and it moves a door to allow all the light to pass through

[@tonyk7ng1803]

@@TonyTheTechnician LASFIT 9005 HB3 LED bulbs Conversion Kit 6000K Cool White, Upgrade LC Plus Mini Size Plug and Play. Will this fit the 2022 Telluride S?

[@Ryanm229]

Great video, I have the SX and lights are way too bright any suggestions on what I can do to change this?

[@TonyTheTechnician]

Thank you. I wouldn't necessarily say the sx lights are to bright but they cMe from the factory pointed a little high. So you could either adjust them down a little or have the dealer do it for you. Alot of people with the sx get flashed by other vehicles alot.

[@Ryanm229]

@@TonyTheTechnician copy that just order t60 to lower them. I’ll see how that does before I start changing things! Thanks so much!!

[@TonyTheTechnician]

@@Ryanm229 no problem at all 👍👍👍

[@adixon198]

Hey tony I have 2021 Kia stinger gtline and I can’t find led to fit and if they don’t it’s not bright any suggestions

[@mh4056]

Hey Tony, do you still have these headlights and how are they holding up? I’ve tried several LED brands on our Telluride and I haven’t found one I like yet. Thanks !

[@TonyTheTechnician]

Yes i do. So far so good.

[@mh4056]

Thanks for the quick reply!

[@mh4056]

I decided to go with the Lasfit LS Plus and they are a night and day difference from the Sealight (higher end line) that I had. Thanks again for recommending this brand!

[@TonyTheTechnician]

No problem at all. Really glad you enjoy them as well

[@cruzgi]

Thanks for the info and video. Just purchased the new LED bulbs. Was wondering if the same technique can be used for my wife's 2020 Hyundai Santa Fe?

[@alanpenny124]

The driver side works but passenger side does not. Any advice?

[@TonyTheTechnician]

Did you disconnect and flip the connection around

[@fdfc78]

Did you put together the video on how to re-aim the headlights after the LED upgrade?? Great video btw!!

[@gregcunningham6084]

Do these led headlights flicker after a auto stop and start? Also, can the lights come or be turned on when the engine is not running or in ignition mode? Are they both low and high beam? What’s the item or product number?

[@TonyTheTechnician]

No they do not flicker. Yes the lights can be turned on any time your original headlights could be turned on. Changing the headlights is not going to change the operation. It is a projection style headlight assembly so yes the bulb is both low and high beam. The is the lastfit LA PLUS you can either find it in the description next to telluride or check out the lastfit website.

[@gregcunningham6084]

@@TonyTheTechnician Thanks you especially for the quick response. I purchased the Auxito LEDs and they flick every time my Telluride go from auto stop to start. Also, LEDs only come on when the vehicle is running or in ignition mode. Plan to replace with Lasfit. Thanks again.

[@rbaerga305]

I have the last fit set and they flicker for me on start stop.

[@johnmagana6608]

@GregCunningham I have a 2021 S Telluride. I installed the lasfit led headlights and they always kind of flicker a bit when the auto stop is over and truck kicks in on start. It kind of quickly reduces the brightness of the headlight for a split of a second but the headlight remains on at all time.

[@moondustmix1682]

Thanks for the video!

[@TonyTheTechnician]

Thanks for watching

[@courage.s]

Did you put back the headlight cover without the dessicant packet/incandasent bag cover?

[@TonyTheTechnician]

I put the cover back without it

[@courage.s]

@@TonyTheTechnician ok gotcha, thanks . You should also post a video for adjusting Telluride headlights - up/down and most important righ/left.

[@TonyTheTechnician]

Ya I'm going to start working on that next week. So hopefully before to long I'll have a video on it

[@TheHumbleGentleman]

How are both the LED headlights and front turn signals holding up?

[@TonyTheTechnician]

They have been good. I had an issue with hyper flashing for about q months when both were installed but it eventually stopped. But right now they don't recommend the blinkers until they get a new chip design

[@marcdecotran2683]

I have nightsky 2021, with LED. Lows are OK but highs are still very inadequate. Any options?

[@ShahmirH]

Can you change the daytime running lights from white to amber? I was thinking about getting a telluride s but i really like the amber over the white.

[@TonyTheTechnician]

Unfortunately not right now unless you buy the sx headlights or somehow modify it yourself. Either way would probably be expensive. Probably easier to buy the ex prestige package

[@ShahmirH]

@@TonyTheTechnician Thanks 👍🏽👍🏽

[@levicharles996]

Have you had any problems with excess heat from the bulbs in the housing ?

[@TonyTheTechnician]

No I have not. They have been working great and haven't had any issues

[@davidh5950]

LEDs run cooler than halogen bulbs. If you are in a colder climate with these bulbs your headlight housing will likely not melt the ice on it. You are better off with halogen or hid

[@TonyTheTechnician]

LEDs run cooler if properly engineered but alot of cheaper lights will stack multiple LEDs with insufficient heat dissipation. And with LEDs being more directional then they can cause hot spots on headlight housings. That's why it's still important to find quality led lights and ones with actual engineering behind them so you know the leds have a directional purpose as well as proper cooling.

[@sembouryphan4524]

Have you had any issue with fogging since removing the desiccant bag from the cover housing?

[@TonyTheTechnician]

No I have not

[@lieren1806]

Does it fit the 2022 s trim?

[@zerothomas0185]

dose this change the square as well

[@TonyTheTechnician]

No the ring stays the same

[@jibran1136]

does this headlight LED work both as high beam or low beam as normal car operation?

[@TonyTheTechnician]

Ya it operates the same as the standard projection headlight. The bulb is on and on low it has a door that covers the top half of the light. When you switch to bright it lifts that door and allows all the light out

[@jibran1136]

@@TonyTheTechnician Perfect, thanks

[@zerothomas0185]

where os the telluride facebook page

[@joecollazo9450]

Love my Lasfit but it gets annoying when 3/5 drivers passing by hit me with their high beams because they think I have mine on.

[@rickstevenson9487]

Adjust your beams downward. Obviously you are blinding others.

[@TheExel2000]

How do you remove the cap? Pretty sure the Hulk couldn’t remove mine. I can make it turn but it doesn’t come out.

[@TheExel2000]

Seriously, is there a special tool to remove these caps? I will destroy the plastic before it budges. What am I missing?

[@TonyTheTechnician]

No. They shouldn't be that difficult to remove.

[@TheExel2000]

Thanks for the reply! :). I found out why it was so difficult to remove. The water absorption pack in the cover was bulging out so much that I think this caused the trouble. I think that’s what also may have caused my bulb to go out. I need a new moisture thingy now. Sigh.

[@TonyTheTechnician]

@@TheExel2000 ohh wow ya must jot have been sealed correctly. Hope all turns out well

[@zacharymiller9684]

I tried to connect lasfit light. It came on briefly but wouldnt stay on. Any ideas?

[@TonyTheTechnician]

Did you flip the connector

[@zacharymiller9684]

Yes

[@zacharymiller9684]

@@TonyTheTechnician yes i flipped the connector but when i did this they didnt come on at all

[@TonyTheTechnician]

OK make sure the pins are lining up correctly and not bending when plugging in. If you have done that and flipped the connector and made sure to manually turn the lights on and it still doesn't work then it's probably a malfunctioning bulb. And if you just contact lasfit they will take care of you

[@alexmiller9143]

@@TonyTheTechnician it turned out the pins were bent. Now lights seem to be working. hopefully this is a permanent fix

[@saadNazzal-mc6jc]

Thanks Tony for this useful video. Just like to ask you, do you have any idia about the curtain or the shutter as they called, which is inside the lens and control the low, high beam? And what is the mechanism of its work ? My Telluride 2020 lights works only low beam, no change to high, I chacked the fuse and the relay, both work good. Thanks alot Tony.

[@skfn5992]

I’m Having the same issue

[@racynesimpson3266]

Dealership will replace the shutter under warranty. Mine quick working as well. One dealership tried telling me both of my bulbs blew out at the same time 😂

[@iloqin]

Does this work with the 2022s? I have an ex base that has halogens.

[@TonyTheTechnician]

Yes it should be the exact same

[@iloqin]

@@TonyTheTechnician Yikes. Apparently not. I’m reading that the plug area has a different taper. Might update that in the description. The lasfit does not work on the 2022s. I think Lasfit also says they don’t fit the newer rides. Hope they update

[@TonyTheTechnician]

@@iloqin good to know. Thanks you

[@Joe_Esso]

2022 EX Lasfit fits the housings fine and works fine so far. Did not have to remove the dessicant pack.

[@iloqin]

@@Joe_Esso Great news! How long ago did you buy it? Wondering if they updated the socket.

[@davidwalle5025]

Good video. If I go with leds it will be lasit, diodedymamics would not even talk to me about a job they advertised that I was qualified for according to their job posting.

[@TonyTheTechnician]

Oh wow. Good to know. Thanks for sharing. 👍👍👍

[@DT-yt2zh]

looks like the headlights aim at different points since you moved the vehicle.

[@TonyTheTechnician]

The headlights are aimed at the same locations and even if they didn't the headlight assembly has adjustments to angle them wherever need be

[@Streetglow1995]

I put these in my 22 Telluride S. I've noticed the past couple times I've drove at night, they seem to be flickering a little. Anyone else have this problem?

[@MattPoyner]

did this flickring continue? thanks

[@cizzlen07]

You don’t even show how to put it in the housing

[@TonyTheTechnician]

Umm this is a video showing the differences from one light to another. If you can't screw in a light bulb don't do this job. Remove plastic cap, rotate and remove bulb, unplug, plug in new bulb, Put it back together. I literally show you what you need to do and where it's at. I would hope you could figure it out from that. If not, once again do not try to do it yourself.

[@upsidedowndog1256]

I have to admit, for a company to put out a product like this and not doing the research to read the wiring diagram for the vehicle smells awfully Chinese to me! Anyone should easily be able to discern the difference with a Chiltons, Haynes, or Clymer manual! Ok, maybe not Chiltons.....

[@btroble1]

They make it universal though because telluride is one way but another vehicle might be the opposite. That way the 9005 bulb fits anything.

[@brendafebo6605]

I have a question will the headlights turn on when u so the starter ? I notice it doesn’t.

[@rickstevenson9487]

My 2022 Kia Telluride EX already has LED headlights, but the high beams are really dim. Any suggestions?