2020 Colt Python Unboxing Review

[@kazirizvan7827]

Colt python is the best revolver brand ever, change my mind

[@CrossOfBayonne]

It is

[@russdenney]

Negative ghost rider. It will cost you about 3 times as much, but Korth is the way to go...

[@koryflamand96]

But I can’t

[@julyfishy392]

I agree

[@juniormorgan5401]

Smith and wesson 686

[@LordPoshnameVonPlumbingparts]

When you need to stop a burglar 6 doors down from the comfort of your own living room.

[@reptileguy8458]

Just held one of these in my hand today. ABSOLUTELY BEAUTIFUL GUN!

[@GoldenWebb]

Yessir they are!

[@theredbaron057]

The python is one of the most beautiful modern wheel guns ever made

[@GoldenWebb]

It sure is! Thank you for viewing my friend!

[@mrchow489]

I was waiting all week for this.👍👍👍👍 congrats on your beautiful new python. I'm still trying to find one .

[@SkiaLykoS]

You ain't lying

[@GoldenWebb]

mrchow489 man, you might want to check my newest uploaded video...

[@GoldenWebb]

- Fearfulpath2 - haha..... check out my newest uploaded video

[@abc-wv4in]

Beautiful handgun! Congrats and thanks for sharing. I may eventually have to have one of these after the teething pains. I have a 1973 nickel 6" Python--very accurate shooter.

[@GoldenWebb]

abc I wish it wasn’t a piece of junk lol

[@abc-wv4in]

@@GoldenWebb Hopefully they'll get it fixed for you.

[@bigdaddydave4468]

I want one because it’s what Rick had on the walking dead

[@usafairmanlord]

Beautiful, absolutely beautiful.

[@GoldenWebb]

P.SMURF yep, I wish it functioned better then it looked

[@NoahisafineName]

Ikr

[@eatingelizabethsfrizbee]

What do you think of the Yankee Marshall saying that most problems are caused by short stroking the trigger and a weak hand on the Python due to Colt?

[@fredsalter1915]

That wheel-gun is positively DOPE! Definitely on my bucket list. Great vid. Subbed!

[@GoldenWebb]

I sure do appreciate that my friend. Welcome to the channel

[@stkbkr1]

What an icon of a gun, I love it! Thanks.

[@ngurafanai998]

I bet you feel like Rick Grimes after unboxing this

[@simomatero8229]

How about the lock-up? The old Pythons’ mechanism was made so that there was no play concerning the cylinder when the trigger was pulled; meaning the very moment that the trigger would be pressed all the way and the gun would fire. This was a strength considering it’s accuracy, but a weakness when it came to longevity. I know that they’ve reduced the number of trigger mechanism parts by 14 compared to the old ones and I’m more than curious if there’s some play in the cylinder like we’re used to seeing in just about every mass produced revolvers.

[@GoldenWebb]

Simo Matero check out my new video on this, old python vs new python. The lock up on these new ones are just as bank vault right

[@simomatero8229]

@@GoldenWebb Great, thank you!

[@ericdiefel4505]

I just bought mine about an hour ago! I'm ecstatic! Happy 4th everyone!

[@GoldenWebb]

Congrats my friend! Happy 4th to you! Thank you for viewing my friend!

[@trkthnc]

Let's play a game, Take a shot every time he says "PHAYTOHN"

[@GoldenWebb]

Tarık T. Loll you’d be bad off in a few seconds! Thanks for viewing

[@trkthnc]

@@GoldenWebb No problem bro keep up the great work!

[@DrAgan_tortojed]

So, after unboxing it, you've got to re-box it and send it back to colt, in order to get your money back.

[@GoldenWebb]

Tor Tojed yea pretty much haha

[@Coltpython1981]

Just received mine last Friday I actually had to wait a year and a half but it was worth it to go with my 1981 custom number 136 out of 250 Python.

[@GoldenWebb]

Very nice my friend! Thank you for viewing!

[@Bladen]

"This thing was foired 6 times from factory." Sorry I have you same accent bro. Love the video and I'm very glad they started producing the Python again!

[@GoldenWebb]

Th3Bladen have you seen my other videos? This thing won’t even fire

[@patrickholt8782]

You’ve been my number one source for new python news

[@GoldenWebb]

Thank you for viewing my friend

[@jamesryan7823]

Picked mine up yesterday. Heard some stories of idiots paying 2000+ for some of these. Got mine for 1500$. They aren’t as hard to find as people keep saying. Most the shops around my area get 1-3 a week.

[@troyfritz5857]

Yeah mine comes in Tuesday. I can't wait

[@GoldenWebb]

James Ryan yea, there’s been a bunch of people on Gun broker pay upwards of 2400$ for one

[@GoldenWebb]

Troy Fritz be careful, mine is a Lemon

[@troyfritz5857]

@@GoldenWebb why is it a lemon?

[@jskypercussion]

@@GoldenWebb Ijust got one on Gun Broker for $1,500. I kept searching and finally found one for the right price.

[@ssbishere]

O yeah! Rick's gun.

[@bryantherocker]

Extremely handsome revolver

[@littlejay08]

If u listen closely, u can actually hear the gun saying "COOOOORRRRALLLLLL"

[@GoldenWebb]

🤣🤣🤣

[@waynecastleman1363]

That's a very beautiful revolver. I'm still doing my homework on buying a new Colt or Smith, I'm not sure which one to favor. I did however purchase a Kimber K6 Target modal an really like it quit a bit. I will check out your comparison review old vs new Python video. Great content.

[@GoldenWebb]

Thank you for viewing my friend!

[@waynecastleman1363]

@@GoldenWebb So what do you think of the Python now

[@GoldenWebb]

@@waynecastleman1363 i believe they still haven’t perfected it. Still hearing of major problems, especially rear sight. Only reason I’ve kept mine is because it’s the 283rd python made

[@WRX_Caleb_Earl]

I just received one of these and it’s like a piece of art.

[@johnnypichardo5698]

That is one beautiful revolver!

[@GoldenWebb]

Johnny Pi hardo yessir it is

[@Tonetwisters]

Apparently, folks are having trouble with the cylinder turning ... not good.

[@MrMechudo94]

Rick Grimes approved

[@michaelbellar3022]

Congrats on your new python. Great video

[@GoldenWebb]

Michael Bellar thank you for the kind words and thank you for viewing my friend!

[@brandonjones5096]

It's actually the 283 one produced, the first 2020 colt python had a serial number of 1000.

[@GoldenWebb]

I guess it would be 284th now

[@mike34744]

How’s the trigger compared to the old one? I might have missed in video because wife sleeping and volume low.

[@jamesryan7823]

I just picked mine up yesterday. The trigger is amazing. Both double action and single action are so much smoother than my 65 model.

[@xCaPz]

Supermike Everyone is saying that the new Python is better than the old

[@GoldenWebb]

Supermike I’ll actually have a video out on that as soon as I can. But, I think the double action is better, single action on mine feels alittle stiff though.

[@GoldenWebb]

xCaPz I’m having problems with mine. But if I wasn’t, I’d say the new one all day over the old one

[@melvinjohnson2074]

From excitement to disappointment once all the design flaws were uncovered.

[@zoobrizz]

There’s a asshole in every group☝️

[@ndn2589]

My grandfather just gave me his it gorgeous its the.older model thinking of getting a new one

[@GoldenWebb]

Haha you want to sell it?

[@ndn2589]

@@GoldenWebb hell no you what there worth

[@GoldenWebb]

Yea haha, I still would pay it for a nice one

[@GoldenWebb]

I’ve had 6

[@ivankipniss3082]

Congrats, thanks for sharing!

[@GoldenWebb]

Ivan Kipniss thank you for viewing my friend!

[@885chris]

How much does the one your reviewing cost? thanks

[@smithn.wesson495]

Beautiful Gun!!

[@GoldenWebb]

Smith N. Wesson yessir

[@chrisinidaho4569]

Old Python vs. the new Python will probably like the pre-'64 Winchesters vs to post-'64 Winchesters. Both tried to save money in the manufacturing process and even if some things are better, my guess is that the new ones will not be as treasured as the old ones.

[@GoldenWebb]

Yea I know what you mean man. We shall see though when everything gets straightened out

[@u.p.woodtick3296]

Chris Bowen I had a Winchester mod 70 XTR in 30-06 that was a super shooter, it took lots of whitetails, but I kept my 1952 mod 70, 30-06, 95% original

[@rogerl8488]

Well the old value will go down now.....

[@GoldenWebb]

Roger l if they didn’t have as bad of problems as they do, I’d say that would be the truth

[@GoldenWebb]

westbender 820 they already have, check out gun broker, it’s crazy

[@GoldenWebb]

westbender 820 I understand that fully my friend!!!😂😂

[@Bob-pg7es]

Saw one at the local fun store. They have it with their rental guns. First impression was, wow ! Beautiful gun. I went back yesterday, and was told someone broke it. Apparently slamming the cylinder closed. F'ed up the timing. They have to send it back to Colt. I know you shouldn't do that to a revolver, but,...... I have done that myself to my GP100 Ruger. Have owned it since 1993. No problems what so ever. I would think for $1500, it would be a little tougher.

[@GoldenWebb]

Q and that is now the 11th python I’ve heard has already been broke. I but that’s not actually what happened.

[@Coltergeist212]

Nice gun sir!

[@GoldenWebb]

COLTERGEIST thank you man!

[@6SleepySpades9]

Lit intro my dude

[@GoldenWebb]

Thank you my friend!

[@72cmcinc]

Very nice! Cant wait to see more with this one!

[@GoldenWebb]

72cmcinc you might want to watch my newest video

[@72cmcinc]

@@GoldenWebb Yep, watching now. Yikes!

[@kenku9670]

Do you know if the old Python speedloaders going to work for the new Python?

[@GoldenWebb]

KEN KONG they seem to work but not the best

[@thunderbolt5354]

Hey Wheel Guns are so 20th Century !

[@GoldenWebb]

thunder bolt at least they would work in the 20th century lol!😂

[@spacepeanut8993]

How is it, I'm subscribed, hit the alert all bell and still not getting your videos on my subscription page?

[@GoldenWebb]

Paddy O'Furniture I’m not sure man, it’s untelling with KZbin to be honest

[@wassimmatta8390]

Congrats! Pretty awesome!

[@GoldenWebb]

Wassim Matta yessir! Thank you for viewing!

[@nessliestrife993]

I’m torn between 6” and 4.25”.

[@maxhernie8053]

hey i have the 4.25” version bought in 2022, was just wondering if you had any issues with accuracy and the sights. It looks like the rear sight on mine is super wobbly and the elevation was cranked down. also my front sight seems crooked. when i benched it, it shot 3 groups of 2 VERY low and the groups were separate but each group had a tight group of 2, sub1”. shooting it normally, the gun felt like i used a buck shot 50 yards away; all over the place. any thoughts???

[@GoldenWebb]

Yep the rear sight comes loose very easily. If it wasn’t for my first one being the 283rd one made I’d already have sold it

[@maxhernie8053]

@@GoldenWebb damn i wish i hadn't impulse bought this thing. hopefully someone makes a better sight soon.

[@GoldenWebb]

@@maxhernie8053 I don’t foresee it anytime soon or they’d already came out with one…

[@maxhernie8053]

@@GoldenWebb wilson combat

[@themeeks-verse754]

Lol I just call this ricks gun

[@radiohobbyist13]

I kind of wish you had showed the texturing on the hammer spur. Is it the same as the old Pythons?

[@GoldenWebb]

David Branscome no, it’s horizontal lines instead of the old type of checkering. I like the old hammer spur better. I will show that off in the old vs new video

[@radiohobbyist13]

@@GoldenWebb Thanks for the reply. Many years ago I had a pair of Pythons and I loved the way they did the checkering on the hammer spur. I'm sorry to hear that they changed it. Honestly, I've been continually provoked at Colt ever since they started making revolvers again. I'm an older man and I vividly remember what they once were. Right now, it still looks like they haven't redeemed themselves. I have a couple of Kimber revolvers that I'm crazy about, I can't wait for the four inch version.

[@GoldenWebb]

David Branscome thank you for viewing my friend. Anything I can do to help just let me know. Also, check out my newest video I just posted. It might make you sick as it did me

[@davidmichael4804]

I seen them today at our Show! For $2,200! Lol... Not for me! I still have my 70, and 80 year guns, and it is not worth it to me! I for some reason? I bought a new Hell cat last night as soon as he got it out, and I am not a 9 guy at all!! But it does feel good , and seems like a good conceal carry gun? I will see? Might be for sale? Lol..

[@GoldenWebb]

David Michael what do you want for that hellcat? I’ve heard some good things about it and I need to review one if you decide to sell it

[@mgee669]

One thing hasn't changed Colt the company knows how to embarrass publicity-wise

[@GoldenWebb]

M Gee oh yea, there the best at that

[@paulscountry456]

Maybe they got it right.

[@GoldenWebb]

Pauls Country or maybe it’s junk like this one now is! Thanks for the comment and thanks for viewing my friend!

[@Otis010707]

What was the MSRP?!

[@GoldenWebb]

Otis010707 1500! Thanks for viewing my friend

[@undeadbrosm41a39]

We need an Anaconda now!

[@GoldenWebb]

I’d like to see it!

[@fashionstreet1]

Beautiful can you buy this at cabelas and is it a black powder?

[@GoldenWebb]

This is a colt python 357 mag, it’s not black powder

[@wbwills2]

That sound!nice!

[@GoldenWebb]

Burke Wills it was nice until I shot It. Light primer strikes very other round

[@stevenbennett3805]

I see you know the correct way to close the cylinder of a Colt revolver.

[@GoldenWebb]

Steven Bennett yessir! Thank you for viewing and thank you for the comment my friend!

[@stevenbennett3805]

@Dig'n Florida This is true. I was however referring to the pulling back of the cylinder release (crane lock) before swinging the crane up and placing the cylinder back into the frame. This prevents the cylinder rachet from laterally striking the crane lock plate which, over time, can wear down the spurs on the rachet.

[@popeye7833]

Does it will arrive in blue color soon ?

[@GoldenWebb]

Popeye was supposed to within a year, but I doubt it now since there’s so many of them having trouble

[@popeye7833]

@@GoldenWebb new Colt problems really

[@mikewieczorek4678]

Best tutorial

[@michaelibey6700]

I'm not impressed with the Cobra for two reasons, the caliber and the weight.If I was going to carry a revolver it would be a S&W MODEL 1917 or it's later commercial models. It's very light for it's caliber, you have full moon clips available. I've talked to enough Vets over the years to know if U shoot somebody with a .45 ACP, chances are they're going down. A good 1917 Smith can be had for 6-8 hundred dollars. Is the Cobra a beautiful gun? Yes, of course. If U have the money and like the caliber, by all means, go for it. My home defense gun is a Mossberg pump loaded with 3" OO buckshot.

[@GoldenWebb]

Michael Ibey Thanks for the comment and thanks for viewing my friend!

[@justadutchman5169]

Dang.. Its such a beauty.

[@GoldenWebb]

It is!

[@djlu3011]

Are they coming out with the blued version?

[@GoldenWebb]

dj lu they was supposed to be next year, but since this ones having trouble, I doubt it now. Not for awhile anyway. Thanks for the comment and thanks for viewing my friend!

[@DrAgan_tortojed]

No need for that - the 2020 model is actually full of blues, since it does not revolve and does not fire...A frozen snake...

[@GoldenWebb]

Tor Tojed nicely said lolll

[@claudioluiz11]

Good job,. Thank so much.

[@GoldenWebb]

Cláudio Silva thank you for viewinf my friend!

[@budsimpson2853]

I can see this guy in first grade taking 50 minutes to explain the contents of his lunch and then taking forever to unwrap his sandwich.

[@GoldenWebb]

Bud Simpson haha, I always ate lunchroom food. Never considered bringing my own food until probably high school, but then we could leave halfway though and that’s when I’d eat.

[@zoobrizz]

Old people like to complain

[@AceHardy]

📝

[@ZOMBIE-TORE]

How did you find this?? Im still trying to buy one!!!

[@GoldenWebb]

I got this one the first week it was released, you can find them decently easy now

[@ZOMBIE-TORE]

@@GoldenWebb where at? Im struggling to find new or old ones. The only old one ive found was like 5k

[@GoldenWebb]

@@ZOMBIE-TORE gunbroker, new ones around 1700

[@qingfuhuang8891]

How much

[@googleuser8448]

Sweet pistol! I wonder why they always want you to join the n.r.a. and not g.o.a.?

[@GoldenWebb]

Google User who knows haha

[@justinbooth5482]

Enjoy my friend!

[@GoldenWebb]

Justin Booth thank you for the kind words and thank you for viewing as always!

[@daf3625]

She’s a beauty

[@GoldenWebb]

daf3625 1 yessir she is! To bad it already had to be sent back

[@Stagpro99]

Officer Friendly! 🤠 🏢

[@GoldenWebb]

Yessir!

[@spartanj2957]

I will keep my blues 2 1/2" 4" and. 6" I bought new for 600 each except the 4" paid 200 .

[@GoldenWebb]

Spartan J killer deal my friend!

[@enriquemedrano5128]

What kind of British accent is this?

[@GoldenWebb]

South eastern Kentucky accent

[@marryson123]

are these just stainless steel or nickle plated?

[@GoldenWebb]

marryson123 all stainless

[@abe1365]

Awesome!

[@GoldenWebb]

abe1365 check out my newer videos. Mine has some major problems

[@user-m1kep0e]

f,finaly. . .

[@tlk0216]

fingernail bitter! hungry?

[@lukedawg357SIG]

Congratulations very nice i like.

[@GoldenWebb]

Luke DAWG thank you for the kind words my friend!

[@6SleepySpades9]

Beautiful I love it

[@GoldenWebb]

Yessir!

[@jwales1177]

Nothing like soiling a legacy. 🤭

[@GoldenWebb]

mark miller exactly. Thanks for the comment and thanks for viewing my friend!

[@ibsexplosion4178]

Another Colt bowel movement, close the doors it’s all over Colt. Colt shit the bed right through the mattress and box springs.

[@GoldenWebb]

IBS Explosion 😂😂😂 I’ve cracked up at this one. Thanks for the comment and thanks for viewing my friend!

[@3roxxxy]

2020 Colt Python is junk, buy a S&W 686 or 685, you will be Happy, Happy, Happy.

[@GoldenWebb]

Buster Bellm yessir I wish I would have! Thanks for the comment and thanks for viewing my friend!

[@garyK.45ACP]

Didn't age well, did it? I would like to see SOMEONE take off the sideplate and grips. Will YOU be that person? They "removed" 14 moving parts? Sounds like the made it into a GP-100, cut the quality control and tripled the price. All you have to do to see what happens when you remove all those parts is to look at a Colt revolver of the MKIII series.

[@GoldenWebb]

gary K if you remove the side plate it voids the warranty. You gotta be careful with colt now a days

[@garyK.45ACP]

@@GoldenWebb So that answers the question. Remove the grips. Does it have a V spring for a main spring or a coil spring? The old Python had a V spring, the MKIII change used a coil spring and a transfer bar safety. Does the new on have a transfer bar (between the hammer face and firing pin?)

[@SamSneed0]

$1500 msrp for this modern junk. Would take that money & buy an original from one of the internet auction sites. Hell, maybe even less. Just gotta know what you're doing, which the modern choad doesn't. So enjoy your modern productions.

[@booman1545]

New pythons are junk. I bought one and sent it back to colt for repair. I received back in less than a week with no work done on it. I even sent detailed notes on the issues and they could care less to fix it. Can’t wait for CZ to fire some of those lazy slobs and replace them with workers who actually care.

[@GoldenWebb]

Exactly man, it’s a mess what they’ve done to colt

[@Rain-bp4di]

6 adds in 11 minutes....skip.

[@GoldenWebb]

Sorry about that. KZbin puts them in

[@MrWheresmykeys]

Dont apologize. Isnt that how you make a couple bucks? Rain 825 should apologize for being a dick. I got one on reserve. I'm hoping it becomes a nice collectable to pass to my son. I have guns to have fun with. This will be my show piece. Hopefully

[@zoobrizz]

Girls like to bitch and complain ☝️

[@oliwolf5324]

très belle arme par contre toi tu m'as l'air empoté

[@GoldenWebb]

Thank you for viewing my friend!

[@a.f.s.3004]

Buy one before they put an ugly lock on it like SW!

[@GoldenWebb]

A.F.S. Or when they figure out what’s wrong with mine

[@obama-bin-thanos7484]

Ole

[@u.p.woodtick3296]

Over priced, over rated

[@GoldenWebb]

U.P. Woodtick yessir!!! Thanks for the comment and thanks for viewing my friend!

[@thunderbolt5354]

Overpriced Hunk of Steel !

[@GoldenWebb]

thunder bolt yessir it is! Thanks for the comment and thanks for viewing my friend!

[@gastondraco5906]

Colt sucks ruger is better