2020 john deere x739 x700 signature series deck removal and plow install

[@nopresetsnarklimit1675]

Excellent! Thank you for the clarity for blue jumpers. 1. After driving off the deck, did you raise the lifting mechanism into something of a stow position? I have ordered the same config, i.e. with front quick hitch with lift and hydraulic angling which I suspect prompts then to install the isolation valve for you, I’m betting some folks in other videos ordered the attachments after the fact and that is when you have to order the valve as a separate part. I don’t think that the rear weights are really necessary though recommended, I think I’m going to go a different route later if needed, getting the rear quick hitch bracket and the quick attach ballast box figuring that I’ll just put sand in it to hand-throw on any icy spots as needed and then use the box at other times for carrying tools or trash receptacle when not needed for weight. I have asphalt like you, just purchased this property and it’s new and perfect and I think I’m going to start off by trying out the Deere squeegee go I don’t gouge the asphalt. If that doesn’t hold up or perform well go with the high density plastic from eBay sellers or heavy hitch . Com Great simple solution for the plow lights. Thanks again

[@leubner88]

You're welcome, that makes sense about the isolation valve. And yes after driving off you "raise the deck" and put the height selector back to 5. I wasn't sure if i needed the weights or not, but i got them in lieu of tire chains. I just installed the plastic blade from heavy hitch a couple weeks ago, this asphalt isn't in great shape so i didn't want to risk making it worse.

[@toddshreve]

The isolation valve is included with the quick hitch and not the additional angling kit ram.

[@nopresetsnarklimit1675]

@@toddshreve Did you experience this with your dealer? Seems backwards, for instance; if I wanted to get the quick hitch solely for use with suitcase weights on the front, the isolation valve would not be relevant but if ask them to install hydraulic angling kit, it’s clear I plan to use the hydraulics and would need the isolation valve. Appreciate your input, could help somebody down the road with similar circumstances.

[@toddshreve]

@@nopresetsnarklimit1675 I ordered the parts, unboxed everything, and installed them myself. I didn't order the angling ram. And the valve was in the quick hitch box.

[@nopresetsnarklimit1675]

@@toddshreve Interesting! Thanks for replying and adding the data point.👍🏼

[@nrfa6229]

Where did you get those blue connectors from? Thank you. Thumbs up and subscribed.

[@leubner88]

From autozone, or really any automotive store should have them. Look up "tap splice" and they're almost everywhere.

[@nrfa6229]

@@leubner88 Thank you. You should do a video on how you used then on the two places for your x739. I have the same tractor. The reverse and the seat. Thanks again man. Greatly appreciate it.

[@leubner88]

@@nrfa6229 just uploaded a new video explaining the connectors i used. I hope it helps.