2021 F150 Mirror Cap Removal

[@johnscaro2487]

By far the best how to video. There is a slot to put the screwdriver in when prying and it’s sounds so bad when it pops loose. Passenger side was a little tougher to get off but make sure the screwdriver is in that slot. When back together all worked as before. Thanks.

[@mini2nut67]

Top notch tutorial. I plan on changing out my black XLT Lightning mirror caps with a body color set. I also plan on doing the same for all four door handle covers as well.

[@stevensimpson1043]

Simple, and to the point. Thank you

[@russwentz3957]

Thank you for taking the time to pass on your experience. So vary appreciated!

[@williadawilliams]

Thanks Chris for the video. I am researching how to remove the mirror to run the cables for a side camera. This helped alot. Now i have to find one for the door panel to get the wires from the mirror to the headliner.

[@EPICJONTUAZON]

Thanks for the video. Def. on my list to replace!

[@thethingsyouwillfind7493]

Just got my lightning pro and can’t wait to paint the caps! Thanks for this video

[@jim76356]

Great info thanks I just broke my mirror on my 23 Lightning backing into the garage the replacement mirror comes with paint to match caps since the front was broken I was able to transfer my old ones over to the new mirror.

[@caseyc8603]

Followed the instructions but the 2023 xl mirrors with the notch in the corner for blind spot is too fragile broke the passenger side because its so thin cost us 200 because i bought the drivers side as well. Guessing it will shatter too

[@BFNTRUCKSHOP]

Great work Chris! Thanks for doing this video!

[@spitcool]

My pleasure!

[@dekebell3307]

Thanks so much man! Great tutorial, and much needed!

[@Trey1970]

Awesome video. I didn't get my driver in the right slot and I broke the mirror drive motor. Oh well, at least that part is cheap. Wish I could post pictures here.

[@atrain007beastable]

Thanks for the video Chris! Do you think once the mirror cap is off, it would be possible to replace the mirror turn signal? Mine is cracked

[@JCMcustoms]

Awesome!! Super helpful!! Thank you!!

[@Rev_5.0]

Great video. I just picked up a set of power folding mirrors for my XLT and need to get the caps painted. This video helped with showing on to remove the caps. Straight to the point

[@seantaylor7146]

Thank you, it worked perfectly!

[@america10111998]

Yeaaa I tried to take off my 2022 lens off and it was too hard. I felt I was gonna destroy it.

[@wadewhitworth4720]

What do u do with the wires that r involved

[@Turbossandtiress]

Thank you !

[@Ronaldo_hxxph]

Great video man 🤙

[@Dude-mz8su]

Use the motor to move the glass to the inner/upper position. When you push on the glass by hand you actually forcing the plastic gears in the motors to jump. It is as harmful as it sounds.

[@rmgoinhammer]

Hey i was wondering i could find the plastic peice on mirror cap as a stand a lone piece

[@scottreal-time1778]

Thanks!

[@gpellis]

The little square trim piece you mention, does that have a part number or anything on it? Mine broke off my truck.

[@myreviews7936]

I need to replace the plastic led cover. Buy u a six pack if u do a follow up :-)

[@toycarsrebuilder]

thanks man

[@marcustellez3184]

Do you happen to have a part number for the paintable mirror caps?

[@SirSnacky]

Definitely want to do this, but was a little hesitant to do this myself. Thanks for this! How difficult are the door handles to replace?

[@mini2nut67]

I have watched some videos but as always their is a some clever tips and tricks.

[@QuickShift24]

Thanks for the video. When you pry with the screw driver are you sliding it between the mirror and the disc behind the center of the mirror?

[@spitcool]

Correct. It goes in perfectly at that angle and should be resting against the back of the glass. I'm pulling out from the handle of the screwdriver, not pushing against the inside of the mirror or mounting plate.

[@QuickShift24]

@@spitcool Thanks!

[@scottreal-time1778]

Just did mine a little nerve racking but your video was spot on! Thanks again!

[@josebehar8219]

Did you paint the side emblems yourself?

[@spitcool]

They are painted, but I did not do it myself.

[@josebehar8219]

@@spitcool did you send them somewhere or bought them like that?

[@spitcool]

@@josebehar8219 I worked with BFN Truck Shop. I paid them to purchase new parts, paint them the way I wanted, and they shipped them to me when complete.