2021 Fatboy with Vance & Hines 300 Eliminators - Let’s make it LOUDER!

[@redstingraycorvette]

Sounds great beautiful bike

[@canadiansa1nt309]

Thanks! 👍

[@LifelongMusicJunkie]

They sound great!

[@bobclapper2672]

Hey Saint , just found your channel, & I just got a 21 FatBoy , looking forward to more of your videos as I learn more about my bike ! 1 question, is the Cat. Converter in the Stock Slip ons ? If so , did that make a big difference in heat or power ?

[@canadiansa1nt309]

To be honest I never rode the bike with the stock exhaust. As soon as I got the bike delivered it went straight into the garage and I changed the exhaust. But from other bikes I’ve had, I never noticed a heat difference. But there was a bit of a power difference as the exhaust breathes better without the Cat in the way.

[@Corky341]

The pipes I want on my Street Bob. ......... But. Do you/will I need a new fuel pack?

[@canadiansa1nt309]

I doubt you would need a tune if you were just adding the pipes as it won’t make a drastic difference. Couple the pipes with a high flow air intake and you should do the tune.

[@dixienormous3262]

Dude!!!!! Awesome upload!!! Guess what I'm gonna do today now....and will not affect the tuning at all?

[@canadiansa1nt309]

It should not affect the tune. I have a stage one with no issue and I’ve also ran straight pipes with no issues in the past. It wouldn’t be such a huge change that you would have to retune.

[@gilbergviana8572]

Very good, very good.

[@mikeivan5947]

Do All pipe changes require it be retuned?

[@canadiansa1nt309]

Generally only if you put on a high flow air intake along with the pipes. If you just do pipes you shouldn’t need a tune.

[@tyroneshoelace4872]

Like your videos. Helpful. Thanks. I'm on the brink of buying a 2021 Fat Boy and I'm not comfortable with the exhaust situation. Are you using the V&H slip-ons because Harley Davidson doesn't have the fuel control module to let you use anything else? My dealer told me I only have a few pipes that I can use at this time. I feel that the Fat Boy needs some bad-ass sounding pipes and the few that are usable at this time don't cut it.

[@canadiansa1nt309]

I had Vance & Hines slash cut slip-ons on my previous Fatboy and I wanted something different so I went with the eliminators. I chose them just based on research as I liked the sound. It didn’t have anything to do with Harley Davidson. I also looked at V&H short and long shots. But I agree, a Fatboy needs those big sounding pipes!

[@tyroneshoelace4872]

@@canadiansa1nt309 Interesting because Harley says you are restricted to what exhaust system you can use since they have not developed a fuel module yet.

[@canadiansa1nt309]

That’s a new one on me. I don’t think I’ve ever been told that by a dealer. Same thing for aftermarket air cleaner systems.

[@tyroneshoelace4872]

@@canadiansa1nt309 So then, are you completely satisfied with the Eliminator 300s with the packing out?

[@canadiansa1nt309]

If I had my way they still could be a little louder. I could pull the baffles out but I don’t want to lose the low rumble sound. If I had it to do over, I would look at completely new pipes rather than just slip-ons. I always liked the V&H Bigshots.

[@Andy_FXBB]

Great vid, gonna be doing that tomorrow.

[@canadiansa1nt309]

It definitely opens them up.

[@Andy_FXBB]

@@canadiansa1nt309 all done, brilliant move, great sound.

[@canadiansa1nt309]

Glad it worked out well 👍

[@danielesoprani6731]

In italia fat boy 114 2021 a 4 sonde landa si possono installare ugualmente..?

[@canadiansa1nt309]

Hmmm…my translation isn’t quite making sense.

[@TheRicokilla]

What if I were to debaffle my stock exhaust? Would it be equally sweet?

[@canadiansa1nt309]

I’ve done that before and it was not the same. You would be much better off with slip-ons, trust me.

[@TheRicokilla]

@@canadiansa1nt309 noted. Thanks again 👍

[@colinbrown364]

Good job 👍

[@canadiansa1nt309]

Thank you 🤘

[@jamesswain2923]

I have a honda vtx 1800.would this 114 Ci take it. In a race. Nic ebike I want one

[@canadiansa1nt309]

I would say the Harley would edge it out.

[@jamesswain2923]

@@canadiansa1nt309 sweet. I'm gonna ge me one. Sweet pipes

[@sharksmotorcyclegroup]

Did you mapped your bike with these slip ons?

[@canadiansa1nt309]

It was tuned once these were put on.

[@19134ANDY]

Did you get your front rotor?

[@canadiansa1nt309]

I did not. I still have the same one.

[@blackorizuru934]

I did the same thing with mine!! I'll get a new intake and tune it in the future. is yours staged 1?

[@canadiansa1nt309]

Mine is a Stage One, yes.

[@blackorizuru934]

@@canadiansa1nt309 was there a difference?

[@canadiansa1nt309]

With the Harley tuner (pro street tuner) not much. It gets up to speed a little faster but that’s all I really noticed.

[@blackorizuru934]

@@canadiansa1nt309 what about sound?

[@canadiansa1nt309]

I didn’t notice the sound really change at all with the tune

[@barackblows1942]

Doesn’t that make the pipes too hot since there’s no heat shields?

[@canadiansa1nt309]

It has not been a problem.

[@barackblows1942]

@@canadiansa1nt309 Don’t accidentally bump into them with shorts on. 🩳

[@canadiansa1nt309]

Got that right 👍

[@danielesoprani6731]

In italy, fat boy 114 2021 with 4 land probes can still be done ..?

[@canadiansa1nt309]

Possibly…but don’t take my word for it 👍

[@danielesoprani6731]

@@canadiansa1nt309 Don't you know anyone who can help me ..?

[@danielesoprani6731]

There are those who say that with the US mapping there should be no problems ..!

[@canadiansa1nt309]

I don’t think you would have any problems, however, I am not a Harley Tech.

[@burkowski100]

Hi did your Fatboy had 4 sensors on stock pipe or only 2?

[@canadiansa1nt309]

Hello. There is one per pipe so 2 total.

[@burkowski100]

@@canadiansa1nt309 Thanks ,europe had 4 so is imposible to change yet